CV/gate

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

analogue synthesizer CV/gate (an abbreviation of control voltage/gate) is an analog method of controlling synthesizers, drum machines, and similar equipment with external sequencers. The control voltage typically controls pitch and the gate signal controls note on-off. This method was widely used in the epoch of analog modular synthesizers and CV/Gate music sequencers, since the introduction of the Roland MC-8 Microcomposer in 1977 through to the 1980s, when it was eventually superseded by the MIDI protocol (introduced in 1983), which is more feature-rich, easier to configure reliably, and more readily supports polyphony. The advent of digital synthesizers also made it possible to store and retrieve voice "patches", eliminating patch cables and (for the most part) control voltages. However, numerous companies — including Doepfer, who designed a modular system for Kraftwerk in 1992, Buchla, MOTM, Analogue Systems, and others — continue to manufacture modular synthesizers that are increasingly popular and rely primarily on analog CV/gate signals for communication. Additionally, some recent non-modular synthesizers (such as the Alesis Andromeda) and many effects devices (including the Moogerfooger pedals by Moog as well as many guitar oriented devices) include CV/gate connectivity.…

analogue synthesizer CV/gate (an abbreviation of control voltage/gate) is an analog method of controlling synthesizers, drum machines, and similar equipment with external sequencers. The control voltage typically controls pitch and the gate signal controls note on-off. This method was widely used in the epoch of analog modular synthesizers and CV/Gate music sequencers, since the introduction of the Roland MC-8 Microcomposer in 1977 through to the 1980s, when it was eventually superseded by the MIDI protocol (introduced in 1983), which is more feature-rich, easier to configure reliably, and more readily supports polyphony. The advent of digital synthesizers also made it possible to store and retrieve voice "patches", eliminating patch cables and (for the most part) control voltages. However, numerous companies — including Doepfer, who designed a modular system for Kraftwerk in 1992, Buchla, MOTM, Analogue Systems, and others — continue to manufacture modular synthesizers that are increasingly popular and rely primarily on analog CV/gate signals for communication. Additionally, some recent non-modular synthesizers (such as the Alesis Andromeda) and many effects devices (including the Moogerfooger pedals by Moog as well as many guitar oriented devices) include CV/gate connectivity. Many modern studios use a hybrid of MIDI and CV/gate to allow synchronization of older and newer equipment. The voltages are linked by the formula V_{hz} = 2^{V_{oct}-1} , which can also be written V_{oct} = ln_2(V_{hz}) + 1 . These two implementations are not critically incompatible: voltage levels used are comparable and there are no other safety concerns. So, for example, connecting a Hz/volt keyboard to a volts/octave synthesizer will likely produce some sound, but it will be completely out of tune. At least one commercial interface has been created to solve the problem, the Korg MS-02 CV/trigger interface. On synthesizers the CV signal may be labelled "CV", "VCO in", "keyboard in", "OSC" or "keyboard voltage". CV control of parameters other than pitch usually follows the same pattern of minimum to maximum voltage. For example, Moog modular synthesizers use the 0 V to 5 V control voltage for all other parameters. They are represented on the front panel of many synthesizers as knobs, but often a patch bay allows the input or output of the related CV to synchronize multiple modules together. The pitch voltage from a keyboard could also be used to control the rate of an LFO, which could be applied to the volume of the oscillator output, creating a tremolo that becomes faster as the pitch rises. Modules that can be controlled by CV include VCF, VCA, high and low frequency oscillators, ring modulators, sample and hold circuits and noise injection.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1352326373 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.