CWS T-1

The CWS T-1 was the first serially-built car manufactured in Poland.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The CWS T-1 was the first serially-built car manufactured in Poland. A series of different cars based on the T-1 chassis designed by Tadeusz Tański (hence T-1) of the Centralne Warsztaty Samochodowe (hence CWS), with the body developed by Stanisław Panczakiewicz.

It was the only motor car that could be completely dismantled and put together again with one tool, since all its screws and bolts had the same diameter (though one did need a screwdriver for the spark plugs). In 1927 serial production for CWS T-1 started. Although the car was designed in 1922, it was not until 1925 the prototype tests were completed.

Between 1925 and 1932 approximately 800 CWS T-1 and T-1 variants were produced. Among them were: * Torpedo (open-top) * Kareta (Hardtop) * Berlina (Sedan) * Cabriolet (in fact a semi-convertible) * Pick-up * Van In 1930, the CWS works were absorbed by the Polish state-controlled industrial giant PZInż, yet the production was continued under the previous name.

However, in 1932, a license for the Polski Fiat was purchased from Italy as the Fiat was cheaper to produce and the parent company of CWS did not have mass-production capabilities.

The CWS T-1 was the first serially-built car manufactured in Poland. A series of different cars based on the T-1 chassis designed by Tadeusz Tański (hence T-1) of the Centralne Warsztaty Samochodowe (hence CWS), with the body developed by Stanisław Panczakiewicz.

It was the only motor car that could be completely dismantled and put together again with one tool, since all its screws and bolts had the same diameter (though one did need a screwdriver for the spark plugs). In 1927 serial production for CWS T-1 started. Although the car was designed in 1922, it was not until 1925 the prototype tests were completed.

Between 1925 and 1932 approximately 800 CWS T-1 and T-1 variants were produced. Among them were: Torpedo (open-top) Kareta (Hardtop) Berlina (Sedan) Cabriolet (in fact a semi-convertible) Pick-up Van In 1930, the CWS works were absorbed by the Polish state-controlled industrial giant PZInż, yet the production was continued under the previous name.

However, in 1932, a license for the Polski Fiat was purchased from Italy as the Fiat was cheaper to produce and the parent company of CWS did not have mass-production capabilities.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1353799372 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

6 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.