Cycloid

Uses your system voice; voice and rate in settings.

Snapshot

≈ 9 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In geometry, a cycloid is the curve traced by a point on a circle as it rolls along a straight line without slipping. A cycloid is a specific form of trochoid and is an example of a roulette, a curve generated by a curve rolling on another curve. The cycloid, with the cusps pointing upward, is the curve of fastest descent under uniform gravity (the brachistochrone curve). It is also the form of a curve for which the period of an object in simple harmonic motion (rolling up and down repetitively) along the curve does not depend on the object's starting position (the tautochrone curve). In physics, when a charged particle at rest is put under uniform electric and magnetic fields perpendicular to one another, the particle’s trajectory draws out a cycloid.

In geometry, a cycloid is the curve traced by a point on a circle as it rolls along a straight line without slipping. A cycloid is a specific form of trochoid and is an example of a roulette, a curve generated by a curve rolling on another curve. The cycloid, with the cusps pointing upward, is the curve of fastest descent under uniform gravity (the brachistochrone curve).

It is also the form of a curve for which the period of an object in simple harmonic motion (rolling up and down repetitively) along the curve does not depend on the object's starting position (the tautochrone curve). In physics, when a charged particle at rest is put under uniform electric and magnetic fields perpendicular to one another, the particle’s trajectory draws out a cycloid. \begin{align} x &= r(t - \sin t) \\ y &= r(1 - \cos t), \end{align} where is a real parameter corresponding to the angle through which the rolling circle has rotated.

For given , the circle's centre lies at . The Cartesian equation is obtained by solving the -equation for and substituting into the -equation: x = r \cos^{-1} \left(1 - \frac{y}{r}\right) - \sqrt{y(2r - y)}, or, eliminating the multiple-valued inverse cosine: r \cos\!\left(\frac{x+\sqrt{y(2r-y)}}{r}\right) + y = r. When is viewed as a function of , the cycloid is differentiable everywhere except at the cusps on the -axis, with the derivative tending toward \infty or -\infty near a cusp (where ).

The map from to is differentiable, in fact of class ∞ , with derivative 0 at the cusps. The slope of the tangent to the cycloid at the point (x,y) is given by \frac{dy}{dx} = \cot(\frac{t}{2}) . A cycloid segment from one cusp to the next is called an arch of the cycloid, for example the points with 0 \le t \le 2 \pi and 0 \leq x \leq 2\pi . Considering the cycloid as the graph of a function y = f(x) , it satisfies the differential equation: \left(\frac{dy}{dx}\right)^2 = \frac{2r}{y} - 1.

If we define h=2r-y= r(1 + \cos t) as the height difference from the cycloid's vertex (the point with a horizontal tangent and \cos t=-1 ), then we have: \left(\frac{dx}{dh }\right)^2 = \frac{2r}{h} - 1.

Involute

The involute of the cycloid has exactly the same shape as the cycloid it originates from. This can be visualized as the path traced by the tip of a wire initially lying on a half arch of the cycloid: as it unrolls while remaining tangent to the original cycloid, it describes a new cycloid (see also cycloidal pendulum and arc length).

Demonstration

This demonstration uses the rolling-wheel definition of cycloid, as well as the instantaneous velocity vector of a moving point, tangent to its trajectory. In the adjacent picture, P_1 and P_2 are two points belonging to two rolling circles, with the base of the first just above the top of the second. Initially, P_1 and P_2 coincide at the intersection point of the two circles. When the circles roll horizontally with the same speed, P_1 and P_2 traverse two cycloid curves.

Considering the red line connecting P_1 and P_2 at a given time, one proves the line is always tangent to the lower arc at P_2 and orthogonal to the upper arc at P_1 . Let Q be the point in common between the upper and lower circles at the given time. Then: P_1,Q,P_2 are colinear: indeed the equal rolling speed gives equal angles \widehat{P_1O_1Q}=\widehat{P_2O_2Q} , and thus \widehat{O_1 Q P_1} = \widehat{O_2QP_2} .

The point Q lies on the line O_1O_2 therefore \widehat{P_1 Q O_1} + \widehat{P_1QO_2}=\pi and analogously \widehat{P_2QO_2}+\widehat{P_2QO_1}=\pi . From the equality of \widehat{O_1QP_1} and \widehat{O_2QP_2} one has that also \widehat{P_1QO_2}=\widehat{P_2QO_1} . It follows \widehat{P_1QO_1}+\widehat{P_2QO_1}=\pi .

If A is the meeting point between the perpendicular from P_1 to the line segment O_1O_2 and the tangent to the circle at P_2 , then the triangle P_1AP_2 is isosceles, as is easily seen from the construction: \widehat{QP_2A}=\tfrac{1}{2}\widehat{P_2O_2Q} and \widehat{QP_1A} = \tfrac{1}{2}\widehat{QO_1R}= \tfrac{1}{2}\widehat{QO_1P_1} . For the previous noted equality between \widehat{P_1O_1Q} and \widehat{QO_2P_2} then \widehat{QP_1A}=\widehat{QP_2A} and P_1AP_2 is isosceles.

Drawing from P_2 the orthogonal segment to O_1O_2 , from P_1 the straight line tangent to the upper circle, and calling B the meeting point, one sees that P_1AP_2B is a rhombus using the theorems on angles between parallel lines Now consider the velocity V_2 of P_2 . It can be seen as the sum of two components, the rolling velocity V_a and the drifting velocity V_d , which are equal in modulus because the circles roll without skidding. V_d is parallel to P_1A , while V_a is tangent to the lower circle at P_2 and therefore is parallel to P_2A .

The rhombus constituted from the components V_d and V_a is therefore similar (same angles) to the rhombus BP_1AP_2 because they have parallel sides. Then V_2 , the total velocity of P_2 , is parallel to P_2P_1 because both are diagonals of two rhombuses with parallel sides and has in common with P_1P_2 the contact point P_2 . Thus the velocity vector V_2 lies on the prolongation of P_1P_2 . Because V_2 is tangent to the cycloid at P_2 , it follows that also P_1P_2 coincides with the tangent to the lower cycloid at P_2 .

Analogously, it can be easily demonstrated that P_1P_2 is orthogonal to V_1 (the other diagonal of the rhombus). This proves that the tip of a wire initially stretched on a half arch of the lower cycloid and fixed to the upper circle at P_1 will follow the point along its path without changing its length because the speed of the tip is at each moment orthogonal to the wire (no stretching or compression). The wire will be at the same time tangent at P_2 to the lower arc because of the tension and the facts demonstrated above.

(If it were not tangent there would be a discontinuity at P_2 and consequently unbalanced tension forces.) Using the above parameterization x = r(t - \sin t) and y = r(1 - \cos t) , the area under one arch, 0 \leq t \leq 2\pi, is given by: A = \int_{x=0}^{2 \pi r} y \, dx = \int_{t=0}^{2 \pi} r^2(1 - \cos t)^2 dt = 3\pi r^2.

This is three times the area of the rolling circle. \begin{align} S &= \int_0^{2\pi} \sqrt{\left(\frac{dx}{dt}\right)^2 + \left(\frac{dy}{dt}\right)^2} dt \\ &= \int_0^{2\pi} r \sqrt{2 - 2\cos t}\, dt \\ &= 2r\int_0^{2\pi} \sin \frac{t}{2}\, dt \\ &= 8r. \end{align} Another geometric way to calculate the length of the cycloid is to notice that when a wire describing an involute has been completely unwrapped from half an arch, it extends itself along two diameters, a length of .

This is thus equal to half the length of arch, and that of a complete arch is . From the cycloid's vertex (the point with a horizontal tangent and \cos t=-1 ) to any point within the same arch, the arc length squared is 8r^2(1+\cos t) , which is proportional to the height difference r(1+\cos t) ; this property is the basis for the cycloid's isochronism. In fact, the arc length squared is equal to the height difference multiplied by the full arch length .

If a simple pendulum is suspended from the cusp of an inverted cycloid, such that the string is constrained to be tangent to one of its arches, and the pendulum's length L is equal to that of half the arc length of the cycloid (i.e., twice the diameter of the generating circle, L = 4r), the bob of the pendulum also traces a cycloid path. Such a pendulum is isochronous, with equal-time swings regardless of amplitude.

Introducing a coordinate system centred in the position of the cusp, the equation of motion is given by: \begin{align} x &= r[2\theta(t) + \sin 2\theta (t)] \\ y &= r[-3-\cos2\theta (t)], \end{align} where \theta is the angle that the straight part of the string makes with the vertical axis, and is given by \sin\theta (t) = A \cos(\omega t),\omega^2 = \frac{g}{L}=\frac{g}{4r}, where is the "amplitude", \omega is the radian frequency of the pendulum and g the gravitational acceleration.

The 17th-century Dutch mathematician Christiaan Huygens discovered and proved these properties of the cycloid while searching for more accurate pendulum clock designs to be used in navigation. A Treatise on The Cycloid and all forms of Cycloidal Curves, monograph by Richard A. Proctor, B.A. posted by Cornell University Library. Cycloid Curves by Sean Madsen with contributions by David von Seggern, Wolfram Demonstrations Project. Cycloid on PlanetPTC (Mathcad) A VISUAL Approach to CALCULUS problems by Tom Apostol

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372455615 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

11 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.