Lesson plan
Cyclonic flow meter
A Cyclonic Flow Meter is a meter designed to measure the flow rate of a fluid (or gas) within a cylindrical chamber without a differential pressure directly across the rotating member, and without the use of any bearing (such as in a Turbine meter or Paddle wheel). The ring rotates in a "dead end" of the fluid flow, at the tip of the swirling cyclone. Bypass configuration: A small Cyclonic Flow Meter can be assembled in a "by-pass" configuration across an orifice plate and calibrated as a single unit to obtain high flow rates.
Article summary
A Cyclonic Flow Meter is a meter designed to measure the flow rate of a fluid (or gas) within a cylindrical chamber without a differential pressure directly across the rotating member, and without the use of any bearing (such as in a Turbine meter or Paddle wheel). The ring rotates in a "dead end" of the fluid flow, at the tip of the swirling cyclone. Bypass configuration: A small Cyclonic Flow Meter can be assembled in a "by-pass" configuration across an orifice plate and calibrated as a single unit to obtain high flow rates.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.