Cyclotron
≈ 8 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
s (likely protons or deuterons) exiting the machine and ionizing the surrounding air causing a blue glow A cyclotron is a type of particle accelerator invented by Ernest Lawrence in 1929–1930 at the University of California, Berkeley, and patented in 1932. A cyclotron accelerates charged particles outwards from the center of a flat cylindrical vacuum chamber along a spiral path. The particles are held to a spiral trajectory by a static magnetic field and accelerated by a rapidly varying electric field.
Lawrence was awarded the 1939 Nobel Prize in Physics for this invention. The cyclotron was the first "cyclical" accelerator. The primary accelerators before the development of the cyclotron were electrostatic accelerators, such as the Cockcroft–Walton generator and the Van de Graaff generator. In these accelerators, particles would cross an accelerating electric field only once. Thus, the energy gained by the particles was limited by the maximum electrical potential that could be achieved across the accelerating region.
This potential was in turn limited by electrostatic breakdown to a few million volts. In a cyclotron, by contrast, the particles encounter the accelerating region many times by following a spiral path, so the output energy can be many times the energy gained in a single accelerating step.…
s (likely protons or deuterons) exiting the machine and ionizing the surrounding air causing a blue glow A cyclotron is a type of particle accelerator invented by Ernest Lawrence in 1929–1930 at the University of California, Berkeley, and patented in 1932. A cyclotron accelerates charged particles outwards from the center of a flat cylindrical vacuum chamber along a spiral path. The particles are held to a spiral trajectory by a static magnetic field and accelerated by a rapidly varying electric field.
Lawrence was awarded the 1939 Nobel Prize in Physics for this invention. The cyclotron was the first "cyclical" accelerator. The primary accelerators before the development of the cyclotron were electrostatic accelerators, such as the Cockcroft–Walton generator and the Van de Graaff generator. In these accelerators, particles would cross an accelerating electric field only once. Thus, the energy gained by the particles was limited by the maximum electrical potential that could be achieved across the accelerating region.
Evidence and sources
This potential was in turn limited by electrostatic breakdown to a few million volts. In a cyclotron, by contrast, the particles encounter the accelerating region many times by following a spiral path, so the output energy can be many times the energy gained in a single accelerating step. Cyclotrons were the most powerful particle accelerator technology until the 1950s, when they were surpassed by the synchrotron. Nonetheless, they are still widely used to produce particle beams for nuclear medicine and basic research.
Impact
As of 2020, close to 1,500 cyclotrons were in use worldwide for the production of radionuclides for nuclear medicine and ultimately, for the production of radiopharmaceuticals. In addition, cyclotrons can be used for particle therapy, where particle beams are directly applied to patients. \mathbf{F} = q [\mathbf{E} + (\mathbf{v} \times \mathbf{B})] where is the charge on the particle, is the electric field, is the particle velocity, and is the magnetic flux density.
It is not possible to accelerate particles using only a static magnetic field, as the magnetic force always acts perpendicularly to the direction of motion, and therefore can only change the direction of the particle, not the speed. In practice, the magnitude of an unchanging electric field which can be applied across a gap is limited by the need to avoid electrostatic breakdown. As such, modern particle accelerators use alternating (radio frequency) electric fields for acceleration.
Since an alternating field across a gap only provides an acceleration in the forward direction for a portion of its cycle, particles in RF accelerators travel in bunches, rather than a continuous stream. In a linear particle accelerator, in order for a bunch to "see" a forward voltage every time it crosses a gap, the gaps must be placed further and further apart, in order to compensate for the increasing speed of the particle.
A cyclotron, by contrast, uses a magnetic field to bend the particle trajectories into a spiral, thus allowing the same gap to be used many times to accelerate a single bunch. As the bunch spirals outward, the increasing distance between transits of the gap is exactly balanced by the increase in speed, so a bunch will reach the gap at the same point in the RF cycle every time.
The frequency at which a particle will orbit in a perpendicular magnetic field is known as the cyclotron frequency, and depends, in the non-relativistic case, solely on the charge and mass of the particle, and the magnetic flux density: f = \frac{qB}{2\pi m} where is the (linear) frequency, is the charge of the particle, is the component of the magnetic flux density that is perpendicular to the plane in which the particle is travelling, and is the particle mass.
The property that the frequency is independent of particle velocity is what allows a single, fixed gap to be used to accelerate a particle travelling in a spiral. f = \frac{v}{2 \pi r} with the cyclotron frequency equation to yield: v = \frac{q B r}{m} The kinetic energy for particles with speed is therefore given by: E = \frac{1}{2}m v^2 = \frac{q^2 B^2 r^2}{2 m} where is the radius at which the energy is to be determined.
The limit on the beam energy which can be produced by a given cyclotron thus depends on the maximum radius which can be reached by the magnetic field and the accelerating structures, and on the maximum strength of the magnetic field which can be achieved. \frac{T}{A} = \frac{(e B r_\text{max})^2}{2 m_\text{u}}\left(\frac{Q}{A}\right)^2 = K \left(\frac{Q}{A}\right)^2 where e is the elementary charge, B is magnetic flux density, r_\text{max} is the maximum radius of the beam, m_\text{u} is the atomic mass constant, Q is the charge of the beam particles, and A is the atomic mass of the beam particles.
The value of K K = \frac{(e B r_\text{max})^2}{2 m_\text{u}} is known as the "K-factor", and is used to characterize the maximum kinetic beam energy of protons (quoted in MeV). It represents the theoretical maximum energy of protons (with Q and A equal to 1) accelerated in a given machine.
E(n) = n \Delta E Combining this with the non-relativistic equation for the kinetic energy of a particle in a cyclotron gives: r(n) = {\sqrt{2 m \Delta E} \over q B} \sqrt{n} This is the equation of a Fermat spiral. m = \frac{m_0}{\sqrt{1-\left(\frac{v}{c}\right)^2}} = \frac{m_0}{\sqrt{1-\beta^2}} = \gamma {m_0}, where: m_0 is the particle rest mass, \beta = \frac{v}{c} is the relative velocity, and \gamma=\frac{1}{\sqrt{1-\beta^2}}=\frac{1}{\sqrt{1-\left(\frac{v}{c}\right)^2}} is the Lorentz factor.
Substituting this into the equations for cyclotron frequency and angular frequency gives: \begin{align} f & = \frac{q B}{2\pi \gamma m_0} \\[6pt] \omega & = \frac{q B}{\gamma m_0} \end{align} The gyroradius for a particle moving in a static magnetic field is then given by: r = \frac{\gamma \beta m_0 c}{q B} = \frac{\gamma m_0 v}{q B} = \frac{m_0}{q B \sqrt{v^{-2} - c^{-2}}} Expressing the speed in this equation in terms of frequency and radius v = 2\pi f r yields the connection between the magnetic field strength, frequency, and radius: \left(\frac{1}{2\pi f}\right)^2 = \left(\frac{m_0}{q B}\right)^2 + \left(\frac{r}{c}\right)^2 f(r) = \frac{1}{2\pi \sqrt{\left(\frac{m_0}{q B}\right)^2 + \left(\frac{r}{c}\right)^2}} The decrease in accelerating frequency is tuned to match the increase in gamma for a constant magnetic field.
B(r) = \frac{m_0}{q \sqrt{\left(\frac{1}{2\pi f}\right)^2 - \left(\frac{r}{c}\right)^2}} Keeping the frequency constant allows isochronous cyclotrons to operate in a continuous mode, which makes them capable of producing much greater beam current than synchrocyclotrons. On the other hand, as precise matching of the orbital frequency to the accelerating field frequency is the responsibility of the magnetic field variation with radius, the variation must be precisely tuned.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1373398723 under CC BY-SA 4.0; modifications have been made.