Lesson plan
D-Shape
D-Shape is a large 3-dimensional printer that uses a binder-jetting, a layer-by-layer printing process to bind sand with inorganic seawater and magnesium-based binder to create stone-like objects. Invented by Enrico Dini, founder of Monolite UK Ltd, the first model of the D-Shape printer used epoxy resin—commonly used as an adhesive in the construction of skis, cars, and airplanes, as a binder. Dini patented this model in 2006. After experiencing problems with the epoxy, Dini changed the binder to the current magnesium-based one and patented the printer again in September 2008. Currently, D-Shape is developing two new printer models featuring increased output capacity and enhanced automation through integrated robotics. The latest version of the printer utilizes cementitious, sustainable, and environmentally friendly materials, which not only reduce carbon emissions but also help counteract sea acidification, contributing to healthier marine ecosystems.
Article summary
D-Shape is a large 3-dimensional printer that uses a binder-jetting, a layer-by-layer printing process to bind sand with inorganic seawater and magnesium-based binder to create stone-like objects. Invented by Enrico Dini, founder of Monolite UK Ltd, the first model of the D-Shape printer used epoxy resin—commonly used as an adhesive in the construction of skis, cars, and airplanes, as a binder. Dini patented this model in 2006. After experiencing problems with the epoxy, Dini changed the binder to the current magnesium-based one and patented the printer again in September 2008. Currently, D-Shape is developing two new printer models featuring increased output capacity and enhanced automation through integrated robotics. The latest version of the printer utilizes cementitious, sustainable, and environmentally friendly materials, which not only reduce carbon emissions but also help counteract sea acidification, contributing to healthier marine ecosystems.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.