Danieli Piuma
The Danieli Piuma ( ) is a family of Italian high-wing, strut-braced, pusher configuration single-seat motor gliders that was designed by Tiziano Danieli of Schio and supplied as plans for amateur construction.
≈ 2 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Danieli Piuma ( ) is a family of Italian high-wing, strut-braced, pusher configuration single-seat motor gliders that was designed by Tiziano Danieli of Schio and supplied as plans for amateur construction.
Design and development
The Piuma was designed to be an inexpensive, easy-to-fly and easy-to-build ultralight motor glider. The first model was initially just called the Piuma, but as other models were developed it became known as the Piuma Original. The Piuma is constructed from wood and finished with doped fabric.
The semi-tapered span wing is supported by a single lift strut on each side and has air brakes. The engine is mounted behind the cockpit. The specified engine is the KFM 107er, but engines of can be fitted.
The landing gear is of tricycle configuration and made from steel with rubber shock-absorbers, with an auxiliary tailwheel and fits wheel pants to reduce drag. The tail is cruciform. The aircraft has a glide ratio of 17:1 at .
Cabin width is The designer estimated that it would take a builder 1000 hours to complete the aircraft from the plans. The plans cost US$220 in 1998 and included a 30-page construction manual.
Variants
Piuma Original Initial version with span wing, first flown in 1990. Eight reported completed in 2003. Piuma E Improved model with glide ratio of 20:1 at and other refinements.
Piuma Evolution Improved model with a wider cockpit, more streamlined fuselage, redesigned tail, new lift struts, electrically retractable nose wheel. main landing gear made from a wood/fibreglass sandwich and a more reclined seat. Four reported completed in 2003.
Piuma Tourer Model optimized for cross country powered flight with shorter wing of and a NACA 4415 airfoil used in the rectangular portion of the wing and a NACA 2R1-12 airfoil in the tapered wing tip. Cruises at and has a 10:1 glide ratio. One reported completed in 2003.
Piuma Twin Evolution Two seat model with side-by-side configuration seating, introduced in 1998 and inspired by the Tourer. The recommended engine is the Rotax 503 of .
Text derived from https://en.wikipedia.org/w/index.php?oldid=1321147984 under CC BY-SA 4.0; modifications have been made.