Lesson plan
Data plane
series In routing, the data plane, sometimes called the forwarding plane or user plane, defines the part of the router architecture that determines what to do with packets arriving on an inbound interface. Most commonly, it refers to a table in which the router looks up the destination address of the incoming packet and retrieves the information necessary to determine the path from the receiving element, through the internal forwarding fabric of the router, and to the proper outgoing interface(s). In certain cases the table may specify that a packet is to be discarded. In such cases, the router may return an ICMP "destination unreachable" or other appropriate code. Some security policies, however, dictate that the router should drop the packet silently, in order that a potential attacker does not become aware that a target is being protected. The incoming forwarding element will also decrement the time-to-live (TTL) field of the packet, and, if the new value is zero, discard the packet. While the Internet Protocol (IP) specification indicates that an Internet Control Message Protocol (ICMP) time exceeded message should be sent to the originator of the packet (i.e. the node indicated by the source address), the router may be configured to drop the packet silently (again according to security policies).…
Article summary
series In routing, the data plane, sometimes called the forwarding plane or user plane, defines the part of the router architecture that determines what to do with packets arriving on an inbound interface. Most commonly, it refers to a table in which the router looks up the destination address of the incoming packet and retrieves the information necessary to determine the path from the receiving element, through the internal forwarding fabric of the router, and to the proper outgoing interface(s). In certain cases the table may specify that a packet is to be discarded. In such cases, the router may return an ICMP "destination unreachable" or other appropriate code. Some security policies, however, dictate that the router should drop the packet silently, in order that a potential attacker does not become aware that a target is being protected. The incoming forwarding element will also decrement the time-to-live (TTL) field of the packet, and, if the new value is zero, discard the packet. While the Internet Protocol (IP) specification indicates that an Internet Control Message Protocol (ICMP) time exceeded message should be sent to the originator of the packet (i.e. the node indicated by the source address), the router may be configured to drop the packet silently (again according to security policies).…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.