DBm

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

(the voltage source) and dBm (the power dissipated as heat by the 600 Ω resistor) dBm or dB mW (decibel-milliwatts) is a unit of power level expressed using a logarithmic decibel (dB) scale respective to one milliwatt (mW). It is commonly used by radio, microwave and fiber-optical communication technicians & engineers to measure the power of system transmissions on a log scale, which can express both very large and very small values in a short form. dBW is a similar unit measured relative to one watt (1000 mW) rather than a milliwatt. The decibel (dB) is a dimensionless unit, used for quantifying the ratio between two values, such as signal-to-noise ratio. The dBm is also dimensionless, but since it compares to a fixed reference value, the dBm quantity is an absolute one. The dBm is not a part of the International System of Units (SI) and therefore is discouraged from use in documents or systems that adhere to SI units. (The corresponding SI unit is the watt.) The level of a power P of ten decibels relative to one milliwatt may be written L P/(1 mW) = 10 dB to comply with the SI. In audio and telephony, dBm is typically referenced relative to the 600-ohm impedance commonly used in telephone voice networks, while in radio-frequency work dBm is typically referenced relative to a 50-ohm impedance.

(the voltage source) and dBm (the power dissipated as heat by the 600 Ω resistor) dBm or dB mW (decibel-milliwatts) is a unit of power level expressed using a logarithmic decibel (dB) scale respective to one milliwatt (mW). It is commonly used by radio, microwave and fiber-optical communication technicians & engineers to measure the power of system transmissions on a log scale, which can express both very large and very small values in a short form. dBW is a similar unit measured relative to one watt (1000 mW) rather than a milliwatt. The decibel (dB) is a dimensionless unit, used for quantifying the ratio between two values, such as signal-to-noise ratio. The dBm is also dimensionless, but since it compares to a fixed reference value, the dBm quantity is an absolute one. The dBm is not a part of the International System of Units (SI) and therefore is discouraged from use in documents or systems that adhere to SI units. (The corresponding SI unit is the watt.) The level of a power P of ten decibels relative to one milliwatt may be written L P/(1 mW) = 10 dB to comply with the SI. In audio and telephony, dBm is typically referenced relative to the 600-ohm impedance commonly used in telephone voice networks, while in radio-frequency work dBm is typically referenced relative to a 50-ohm impedance. \begin{align} x &= 10 \log_{10} \frac{P}{1~\text{mW}} \end{align} Conversely, to express an arbitrary power level in dBm, as in mW: \begin{align} P &= 1~\text{mW} \cdot 10^{{x}/{10}} \end{align} \begin{align} V &= \sqrt{R \frac{10^{P/10}}{1000}}\,. \end{align} Expression in dBm is typically used for optical and electrical power measurements, not for other types of power (such as thermal). A listing by power levels in watts is available that includes a variety of examples not necessarily related to electrical or optical power. The dBm was first proposed as an industry standard in 1940.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1359304663 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

16 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.