DC connector

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A DC connector (or DC plug, for one common type) is an electrical connector that supplies direct current (DC) power. Compared to domestic AC power plugs and sockets, DC connectors have many more standard types that are not interchangeable. The dimensions and arrangement of DC connectors can be chosen to prevent accidental interconnection of incompatible sources and loads.

Types vary from small coaxial connectors used to power portable electronic devices from AC adapters to connectors used for automotive accessories and for battery packs in portable equipment.

A DC connector (or DC plug, for one common type) is an electrical connector that supplies direct current (DC) power. Compared to domestic AC power plugs and sockets, DC connectors have many more standard types that are not interchangeable. The dimensions and arrangement of DC connectors can be chosen to prevent accidental interconnection of incompatible sources and loads.

Types vary from small coaxial connectors used to power portable electronic devices from AC adapters to connectors used for automotive accessories and for battery packs in portable equipment.

Snap and lock DC power connectors

Snap and lock DC power connectors look similar to Mini-DIN connectors but have either 3 or 4 thicker pins and a slightly larger mating shell. Because of this, they do not mate with any of the standardized Mini-DIN connectors.

Some devices, however, use a proper 4-pin Mini-DIN connector for power instead, presenting the possibility of mating such a connector with the wrong port (such as an S-Video output). Known as Kycon 3-pin and 4-pin DC power plugs. Erroneously also known as "Power DIN", although different from any standardized Mini-DIN or DIN connector type.

The male plug's mating shell outer diameter is , and the pins are diameter Standard may include a limit of 20 V at 7.5 amperes Sometimes, there's a knurled retaining ring surrounding the male plug which allows fastening the plug to the chassis receiving the power. Some connectors have a right-angle connector, as seen in the picture.

For aesthetics, some Dell laptop chargers have a glowing ring at the connector tip. File:IEC 61076 M12 L-coding 4-pin connector diagram.svg|M12 L-coding, 2-4 pins, 64 Vdc 12/16 A File:IEC 61076 M12 T-coding 4-pin connector diagram.svg|M12 T-coding, 2-4 pins, 60 Vdc 12 A The International Electrotechnical Commission (IEC) has standardized a set of multi-pin screw plugs matching ISO metric screw thread, available in M5, M8 and M12 sizes.

M5 connectors are very low current, typically only used for signal wiring, while some M8 pin arrangements are rated for up to 3 A, and some M12 arrangements are available up to 16 A. The multi-pin design caters for Ethernet, single and three-phase AC, as well as single or multiple voltage DC. The DC ratings are typically 60 V and below, however the F-coding is rated for 300 V (see #IEC 61076 (LV) below). File:IEC 61076 M12 F-coding 4-pin connector diagram.svg|M12 F-coding, 2-4 pins, 300 Vdc 16 A The International Electrotechnical Commission (IEC) has standardized a set of multi-pin screw plugs matching ISO metric screw thread, available in M5, M8 and M12 sizes (see #IEC 61076 (ELV) above).

The M12 F-coding is rated for 300 V.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1367035885 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

25 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.