DCF77
≈ 15 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
DCF77 is a German longwave time signal and standard-frequency radio station. It started service as a standard-frequency station on 1 January 1959. In June 1973, date and time information was added. Its primary and backup transmitters are located at in Mainflingen, about south-east of Frankfurt am Main, Germany. The transmitter generates a nominal power of 50 kW, of which about 30 to 35 kW can be radiated via a T-antenna. DCF77 is controlled by the Physikalisch-Technische Bundesanstalt (PTB), Germany's national metrology institute and transmits in continuous operation (24 hours). It is operated by Media Broadcast GmbH (previously a subsidiary of Deutsche Telekom AG), on behalf of the PTB. With Media Broadcast GmbH, a temporal transmission availability of at least 99.7% per year or under 26.28 hours of annual downtime has been agreed upon. Most service interruptions are short-term disconnections of under two minutes. Longer lasting transmission service interruptions are generally caused by strong winds, freezing rain or snow-induced T-antenna movement. This manifests itself in electrical detuning of the antenna resonance circuit and hence a measurable phase modulation of the received signal. When the maladjustment is too large, the transmitter is taken out of service temporarily. In the year 2002, almost 99.95% availability, or just over 4.38 hours of downtime, was realized.…
DCF77 is a German longwave time signal and standard-frequency radio station. It started service as a standard-frequency station on 1 January 1959. In June 1973, date and time information was added. Its primary and backup transmitters are located at in Mainflingen, about south-east of Frankfurt am Main, Germany. The transmitter generates a nominal power of 50 kW, of which about 30 to 35 kW can be radiated via a T-antenna. DCF77 is controlled by the Physikalisch-Technische Bundesanstalt (PTB), Germany's national metrology institute and transmits in continuous operation (24 hours). It is operated by Media Broadcast GmbH (previously a subsidiary of Deutsche Telekom AG), on behalf of the PTB. With Media Broadcast GmbH, a temporal transmission availability of at least 99.7% per year or under 26.28 hours of annual downtime has been agreed upon. Most service interruptions are short-term disconnections of under two minutes. Longer lasting transmission service interruptions are generally caused by strong winds, freezing rain or snow-induced T-antenna movement. This manifests itself in electrical detuning of the antenna resonance circuit and hence a measurable phase modulation of the received signal. When the maladjustment is too large, the transmitter is taken out of service temporarily. In the year 2002, almost 99.95% availability, or just over 4.38 hours of downtime, was realized. The timestamp sent is either in Coordinated Universal Time (UTC)+1 or UTC+2 depending on daylight saving time. The highly accurate 77.5 kHz ( wavelength) carrier signal is generated from local atomic clocks that are linked with the German master clocks at the PTB in Braunschweig. The DCF77 time signal is used for the dissemination of the German national legal time to the public. Radio clocks and watches have been very popular in Europe since the late 1980s and, in mainland Europe, most of them use the DCF77 signal to set their time automatically. The DCF77 longwave radio emission offers penetration into buildings and the time transmissions can be received by small ferrite antennas incorporated in the cases of radio-controlled low-cost time keepers without the help of exterior antennas. The accuracy of the DCF77 amplitude-modulated time signals suffices for the every-day use of clocks and watches by consumers where primarily the long-term accuracy matters. Further industrial time-keeping systems at railway stations, in the field of telecommunication and information technology, and at radio and TV stations are radio-controlled by DCF77 as well as tariff change-over clocks of energy supply companies and clocks in traffic-light facilities. { "type": "FeatureCollection", "features": [ { "type": "Feature", "properties": { "title": "Primary antenna", "marker-color": "f00" }, "geometry": { "type": "Point", "coordinates": [9.008515, 50.015528] } }, { "type": "Feature", "properties": { "title": "Backup antenna", "marker-color": "f00" }, "geometry": { "type": "Point", "coordinates": [9.011149, 50.012879] } } ] }
Signal
railway company to synchronize their station clocks. uses isolated guyed lattice masts to elevate the DCF77 antennas.
Time signal
The DCF77 station signal carries an amplitude-modulated, pulse-width coded 1 bit/s data signal. The same data signal is also phase modulated onto the carrier using a 512-bit long pseudorandom sequence (direct-sequence spread spectrum modulation). The transmitted data signal is repeated every minute. Current date and time bits; Leap second warning bit; Imminent change of CET to CEST, or vice versa, Announcement bit; Central European Time (CET) / Central European Summer Time (CEST) bit; Abnormal transmitter operation identification bit; Several parity bits.
Experimental civil defence emergency signal
Since 2003, fourteen previously unused bits of the time code have been used for civil defence emergency signals. This is an experimental service, aimed to one day replace the German network of civil defence sirens.
Civil protection and weather forecast signal
Since 22 November 2006, the DCF77 transmitter uses bits 1–14 to transmit warning messages and weather information. Under responsibility of the German Federal Office of Civil Protection and Disaster Assistance (the German Bundesamt für Bevölkerungsschutz und Katastrophenhilfe, BBK), warnings to the population can be transmitted using these 14 bits. As a further extension of the information content transmitted by DCF77, appropriately equipped radio clocks can provide a four-day weather forecast for 60 different regions in Europe. The forecast data is provided by and under responsibility of the Swiss company Meteo Time GmbH and is transferred in a proprietary transfer protocol. The same 14 bits are employed in a way that ensures compatibility with the transmission protocols of the warning messages. For decoding the weather forecast data, a license is required. Since the bits previously reserved for the PTB are used, older radio clocks should not be affected by the weather data signal.
Future and call sign
The signal distribution contract between the PTB and the DCF77 transmitter operator Media Broadcast GmbH is periodically renewed. After negotiations in 2021, the PTB and Media Broadcast GmbH agreed to continue the dissemination of the German national legal time for the next 10 years. In order to improve the reliability of the broadcast and also the ease of maintenance by the operator, Media Broadcast GmbH has announced that it will build a second remote-controllable high-performance transmitter in 2022. The facilities will then be completely duplicated on site. In the past the PTB expressed it will initialize new negotiations if modernization activities at the transmitting station to improve the signal reception reliability throughout Europe are deemed necessary. The call sign DCF77 stands for D = Deutschland (Germany), C = long wave signal, F = Frankfurt am Main as the umbrella regional unit, 77 = frequency: 77.5 kHz. unsigned int i, lfsr; lfsr = 0; for (i = 0; i >= 1; if (chip ^ !lfsr) lfsr ^= 0x110; } Each time code bit to be transmitted is exclusive-ored with the LFSR output. The final chipped sequence is used to modulate the transmitter phase. During 0 chips the carrier is transmitted with a +15.6° phase advance, while during 1 chips it is transmitted with a −15.6° phase lag. In lieu of the special minute marker used in the amplitude code, bit 59 is transmitted as an ordinary 0-bit, and the first 10 bits (seconds 0–9) are transmitted as binary 1. When compared to amplitude modulation, phase modulation makes better use of the available frequency spectrum and results in a more precise low frequency time distribution with less sensitivity to interferences. Phase modulation is however not used by many DCF77 receivers. The reason for this is the worldwide availability of the (precise time reference) signals transmitted by global navigation satellite systems like the Global Positioning System (GPS), GLONASS, Galileo and BeiDou. Due to the GPS signal structure and the larger bandwidth available, the GPS reception would, in principle, achieve an uncertainty of the time transmission that is lower by at least one order of magnitude than the uncertainty that can be achieved with DCF77 phase modulation receiving hardware (GPS time is accurate to about ± 10 to 30 nanoseconds and the Galileo April, May, June 2021 Quarterly Performance Report by the European GNSS Service Centre reported the UTC Time Dissemination Service Accuracy was ≤ 4.3 ns, computed by accumulating samples over the previous 12 months and exceeding the ≤ 30 ns target ).
Reception area
, on the south coast of Spain from the transmitter. Around 1 AM, it peaks at ≈ 100 μV/m signal strength. During the day, the signal is weakened by ionization of the ionosphere due to solar activity. With a relatively high power of , the DCF77 transmissions can reliably be received in large parts of Europe, as far as from the transmitter in Mainflingen. Within this range the signal strength of the DCF77 signal as specified by the Physikalisch-Technische Bundesanstalt (PTB) is ≥ 100 μV/m. This signal strength assessment was made according to the reflection model with a reflection (one hop) on the ionospheric D-layer. As an example, reception with consumer grade clocks — assuming the employed radio clock can manage reception with ≈ 100 μV/m signal strength — is possible in Norway (Bodø), Russia (Moscow), Turkey (Istanbul), Gibraltar and Portugal (during night hours). Metal structures or interference caused by other electronic devices can cause reception problems within this range. At shorter distances the DCF77 signal strength is much higher. As an example, under from the transmitter in Mainflingen the expected signal strength of the ground wave is ≥ 1 mV/m. Depending on signal propagation and multiple reflections (hops) and local interference the DCF77 signal can sometimes be received further away (see tropospheric propagation). This is associated with a significant decrease in the signal strength and depends on many factors, e.g., the daytime and season, the angle of incidence of the skywave on the D-layer and the solar activity.
Control
to check for deviations The control signal is not transmitted by wire from the Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig to the transmitting radio station in Mainflingen but is generated at the place of emission using a control unit developed by the PTB. This control unit, which is housed in an air conditioned room of the transmitting station, is shielded against high-frequency interferences and controlled from Braunschweig. For reasons of operational reliability, the control signal is generated by three independent control channels all equipped with their own caesium atomic clock. In addition a rubidium atomic clock is available on site. To avoid incorrect emissions the output of these three channels are compared in two electronic switch circuits on site. Output for transmission is only generated when at least two of the three channels are in agreement. Via the public telephone network operational data of the control unit can be called up with the aid of a telecontrol system. Furthermore, the carrier phase time and the states of the second markers are compared in Braunschweig with the setpoints specified by the PTB's atomic master clocks that provide the UTC (PTB). Of these atomic clocks, the CS2 atomic clock in Braunschweig provides the German national legal time standard, and can be used as a highly accurate frequency standard. If there are deviations, the necessary corrections will be made via the telecontrol system.
Accuracy
Transmission
The DCF77 transmitted carrier frequency relative uncertainty is 2 × 10 −12 over a 24-hour period and 2 × 10 −13 over 100 days, with a deviation in phase with respect to UTC that never exceeds 5.5 ± 0.3 microseconds. The four German primary caesium (fountain) atomic clocks (CS1, CS2, CSF1 and CSF2) in use by the PTB in Braunschweig ensure significantly less long term clock drift than the atomic clocks used in the DCF77 facility in Mainflingen. With the aid of external corrections from Braunschweig the control unit of DCF77 in Mainflingen is expected to neither gain nor lose a second in approximately 300,000 years. In theory, a DCF77 controlled external clock should be able to synchronize to within one half of the period of the transmitted 77.5 kHz carrier frequency of the DCF77 signal, or within ± 6.452 × 10 −6 s or ± 6.452 microseconds.
Reception
used in this alarm clock can be seen at the left. Due to the propagation process, phase and/or frequency shifts observed in received signals the practical obtainable accuracy is lower than originally realized with the atomic clocks at the place of transmission. As with any time signal radio transmitter the precise establishment of time is affected by the distance to the transmitter, as the time signal propagates to a time signal receiver at the speed of light. For a DCF77 receiver located away from the DCF77 transmitter, due to transit delay the receiver will be set more than 3 milliseconds late. Such a small deviation will seldom be of interest and if desired instrument grade time receivers can be corrected for transit delay. Further inaccuracies may be caused by the type of wave the receiver records. If pure ground wave reception is anticipated and the reception location is permanent a constant may be included in the calculation, while in the case of pure space waves the receiver cannot compensate for the fluctuations since these are the result of the changing altitude of the reflecting and bending layer of the ionosphere. Similar problems arise where ground and skywaves overlap. This field is not constant but changes in the course of the day between approximately from the transmitter position. Corrected instrument grade DCF77 receivers, using the amplitude-modulated time signals with accompanying antennas oriented tangential to the transmitter's antenna in Mainflingen to ensure the best possible interference-free time signal reception at fixed locations, can achieve a practical accuracy uncertainty better than ± 2 milliseconds. In addition to the amplitude-modulated time signal transmission this information is also transmitted since June 1983 by DCF77 via a phase modulation of the carrier wave with a pseudorandom noise sequence of 512 bits length. Using cross-correlation the reproduced signal at the receiving end can be used to determine the beginning of the second markers much more accurately. The drawback of using phase-modulated time signals lies in the complex instrument grade receiving hardware required for using this time signal reception method. Using this method the Physikalisch-Technische Bundesanstalt (PTB) measured standard deviations of ± 2 to 22 microseconds between UTC (PTB) and UTC (DCF77), depending on the time in the day and season. This was done in Braunschweig located from the transmitter in Mainflingen. Normal low cost consumer grade DCF77 receivers solely rely on the amplitude-modulated time signals and use narrow band receivers (with 10 Hz bandwidth) with small ferrite loopstick antennas and circuits with non optimal digital signal processing delay and can therefore only be expected to determine the beginning of a second with a practical accuracy uncertainty of ± 0.1 second. This is sufficient for radio controlled low cost consumer grade clocks and watches using standard-quality quartz clocks for timekeeping between daily DCF77 synchronization attempts, as they will be most accurate immediately after a successful synchronization and will become less accurate from that point forward until the next synchronization. Some DCF77 controlled consumer grade quartz movements promote accurate time keeping by synchronizing and correcting their time automatically more than once spread over a day.
References
DCF77 on the Global Frequency Database Time code description DCF77 Arduino implementation Hardware , Signal , Code Meteotime A historical visit at DCF77 Mainflingen by Ekkehard Plicht
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378888661 under CC BY-SA 4.0; modifications have been made.