---
title: Decimal
slug: decimal
qid: 
snapshot: enwiki-001375686107
content_hash: 
license: CC BY-SA 4.0
source: https://en.wikipedia.org/w/index.php?oldid=1375686107
tags: [103255224, 107141658, 128812817, 20476463, 23118434, 23556908, 23603337, 24623845, 25392691, 29176338, 29264759, 29407586, 48128016, 50871935]
---

# Decimal

> [!note] Provenance
> Snapshot `enwiki-001375686107` · content root `…`
> Derived from <https://en.wikipedia.org/w/index.php?oldid=1375686107> · Licensed CC BY-SA 4.0

A decimal system (also called base-ten, denary or decenary) is a numeral system that uses ten as its radix (base). Decimal systems are the global standard for denoting integer and non-integer numbers. The way of denoting numbers in a decimal system is often referred to as decimal notation. Presently, the most common decimal system is the Hindu–Arabic numeral system, which is a positional numeral system. However, there are also non-positional base-ten systems, such as Roman or Chinese numerals. A decimal numeral (also often just decimal or, less correctly, decimal number), generally refers to the notation of a number in a decimal numeral system. Non-integral decimals may be identified by a decimal separator (usually "." or "," as in or ). In English, the word decimal often refers to the digits after the decimal separator, for example, that " is the approximation of to two decimals" or "two decimal places." The numbers that may be represented exactly by a decimal of finite length are the decimal fractions. That is, fractions of the form , where is an integer, and is a non-negative integer. Decimal fractions also result from the addition of an integer and a fractional part; the resulting sum sometimes is called a fractional number. Decimals are commonly used to approximate real numbers.…

A decimal system (also called base-ten, denary or decenary) is a numeral system that uses ten as its radix (base). Decimal systems are the global standard for denoting integer and non-integer numbers. The way of denoting numbers in a decimal system is often referred to as decimal notation. Presently, the most common decimal system is the Hindu–Arabic numeral system, which is a positional numeral system. However, there are also non-positional base-ten systems, such as Roman or Chinese numerals. A decimal numeral (also often just decimal or, less correctly, decimal number), generally refers to the notation of a number in a decimal numeral system. Non-integral decimals may be identified by a decimal separator (usually "." or "," as in or ). In English, the word decimal often refers to the digits after the decimal separator, for example, that " is the approximation of to two decimals" or "two decimal places." The numbers that may be represented exactly by a decimal of finite length are the decimal fractions. That is, fractions of the form , where is an integer, and is a non-negative integer. Decimal fractions also result from the addition of an integer and a fractional part; the resulting sum sometimes is called a fractional number. Decimals are commonly used to approximate real numbers. By increasing the number of digits after the decimal separator, one can make the approximation errors as small as one wants, when one has a method for computing the new digits. In the sciences, the number of decimal places given generally gives an indication of the precision to which a quantity is known; for example, if a mass is given as 1.32 milligrams, it usually means there is reasonable confidence that the true mass is somewhere between 1.315 milligrams and 1.325 milligrams, whereas if it is given as 1.320 milligrams, then it is likely between 1.3195 and 1.3205 milligrams. The same holds in pure mathematics; for example, if one computes the square root of 22 to two digits past the decimal point, the answer is 4.69, whereas computing it to three digits, the answer is 4.690. The extra 0 at the end is meaningful, in spite of the fact that 4.69 and 4.690 are the same real number. In principle, the decimal expansion of any real number can be carried out as far as desired past the decimal point. If the expansion reaches a point where all remaining digits are zero, then the remainder can be omitted, and such an expansion is called a terminating decimal. A repeating decimal is an infinite decimal that, after some place, repeats indefinitely the same sequence of digits (e.g., ). An infinite decimal represents a rational number, the quotient of two integers, if and only if it is a repeating decimal or has a finite number of non-zero digits. ==Origin== Many numeral systems of ancient civilizations use ten and its powers for representing numbers, possibly because there are ten fingers on two hands and people started counting by using their fingers. Examples are firstly the Egyptian numerals, then the Brahmi numerals, Greek numerals, Hebrew numerals, Roman numerals, and Chinese numerals. Very large numbers were difficult to represent in these old numeral systems, and only the best mathematicians were able to multiply or divide large numbers. These difficulties were completely solved with the introduction of the Hindu–Arabic numeral system for representing integers. This system has been extended to represent some non-integer numbers, called decimal fractions or decimal numbers, for forming the decimal numeral system. 1=2^0\cdot 5^0, 2=2^1\cdot 5^0, 4=2^2\cdot 5^0, 5=2^0\cdot 5^1, 8=2^3\cdot 5^0, 10=2^1\cdot 5^1, 16=2^4\cdot 5^0, 20=2^2\cdot5^1, 25=2^0\cdot 5^2, \ldots ===Approximation using decimal numbers=== Decimal numerals do not allow an exact representation for all real numbers. Nevertheless, they allow approximating every real number with any desired accuracy, e.g., the decimal 3.14159 approximates , being less than 10 −5 off; so decimals are widely used in science, engineering and everyday life. More precisely, for every real number and every positive integer , there are two decimals and with at most digits after the decimal mark such that and . Numbers are very often obtained as the result of measurement. As measurements are subject to measurement uncertainty with a known upper bound, the result of a measurement is well-represented by a decimal with digits after the decimal mark, as soon as the absolute measurement error is bounded from above by . In practice, measurement results are often given with a certain number of digits after the decimal point, which indicate the error bounds. For example, although 0.080 and 0.08 denote the same number, the decimal numeral 0.080 suggests a measurement with an error less than 0.001, while the numeral 0.08 indicates an absolute error bounded by 0.01. In both cases, the true value of the measured quantity could be, for example, 0.0803 or 0.0796 (see also significant figures). ==Infinite decimal expansion== For a real number and an integer , let denote the (finite) decimal expansion of the greatest number that is not greater than that has exactly digits after the decimal mark. Let denote the last digit of . It is straightforward to see that may be obtained by appending to the right of . This way one has , and the difference of and amounts to \left\vert \left [ x \right ]_n-\left [ x \right ]_{n-1} \right\vert=d_n\cdot10^{-n} , which is either 0, if , or gets arbitrarily small as tends to infinity. According to the definition of a limit, is the limit of when tends to infinity. This is written as \; x = \lim_{n\rightarrow\infty} [x]_n \; or , which is called an infinite decimal expansion of . Conversely, for any integer and any sequence of digits \;(d_n)_{n=1}^{\infty} the (infinite) expression is an infinite decimal expansion of a real number . This expansion is unique if neither all are equal to 9 nor all are equal to 0 for large enough (for all greater than some natural number ). If all for equal to 9 and , the limit of the sequence \;([x]_n)_{n=1}^{\infty} is the decimal fraction obtained by replacing the last digit that is not a 9, i.e.: , by , and replacing all subsequent 9s by 0s (see 0.999...). Any such decimal fraction, i.e.: for , may be converted to its equivalent infinite decimal expansion by replacing by and replacing all subsequent 0s by 9s (see 0.999...). In summary, every real number that is not a decimal fraction has a unique infinite decimal expansion. Each decimal fraction has exactly two infinite decimal expansions, one containing only 0s after some place, which is obtained by the above definition of , and the other containing only 9s after some place, which is obtained by defining as the greatest number that is less than , having exactly digits after the decimal mark. = 0. 012345679 012... (with the group 012345679 indefinitely repeating). The converse is also true: if, at some point in the decimal representation of a number, the same string of digits starts repeating indefinitely, the number is rational. or, dividing both numerator and denominator by 6, . A forerunner of modern European decimal notation was introduced by Simon Stevin in the 16th century. Stevin's influential booklet De Thiende ("the art of tenths") was first published in Dutch in 1585 and translated into French as La Disme. John Napier introduced using the period (.) to separate the integer part of a decimal number from the fractional part in his book on constructing tables of logarithms, published posthumously in 1620. The Hungarian language also uses a straightforward decimal system. All numbers between 10 and 20 are formed regularly (e.g. 11 is expressed as "tizenegy" literally "one on ten"), as with those between 20 and 100 (23 as "huszonhárom" = "three on twenty"). A straightforward decimal rank system with a word for each order (10 , 100 , 1000 , 10,000 ), and in which 11 is expressed as ten-one and 23 as two-ten-three, and 89,345 is expressed as 8 (ten thousands) 9 (thousand) 3 (hundred) 4 (tens) 5 is found in Chinese, and in Vietnamese with a few irregularities. Japanese, Korean, and Thai have imported the Chinese decimal system. Many other languages with a decimal system have special words for the numbers between 10 and 20, and decades. For example, in English 11 is "eleven" not "ten-one" or "one-teen". Incan languages such as Quechua and Aymara have an almost straightforward decimal system, in which 11 is expressed as ten with one and 23 as two-ten with three. Some psychologists suggest irregularities of the English names of numerals may hinder children's counting ability. The existence of a non-decimal base in the earliest traces of the Germanic languages is attested by the presence of words and glosses meaning that the count is in decimal (cognates to "ten-count" or "tenty-wise"); such would be expected if normal counting is not decimal, and unusual if it were. Where this counting system is known, it is based on the "long hundred" = 120, and a "long thousand" of 1200. The descriptions like "long" only appear after the "small hundred" of 100 appeared with the Christians. E. V. Gordon's Introduction to Old Norse gives number names that belong to this system. An expression cognate to 'one hundred and eighty' translates to 200, and the cognate to 'two hundred' translates to 240. Goodare details the use of the long hundred in Scotland in the Middle Ages, giving examples such as calculations where the carry implies i C (i.e. one hundred) as 120, etc. That the general population were not alarmed to encounter such numbers suggests common enough use. It is also possible to avoid hundred-like numbers by using intermediate units, such as stones and pounds, rather than a long count of pounds. Goodare gives examples of numbers like vii score, where one avoids the hundred by using extended scores. There is also a paper by W.H. Stevenson, on 'Long Hundred and its uses in England'. Many or all of the Chumashan languages originally used a base-4 counting system, in which the names for numbers were structured according to multiples of 4 and 16. Many languages use quinary (base-5) number systems, including Gumatj, Nunggubuyu, Kuurn Kopan Noot and Saraveca. Of these, Gumatj is the only true 5–25 language known, in which 25 is the higher group of 5. Some Nigerians use duodecimal systems. So did some small communities in India and Nepal, as indicated by their languages. The Huli language of Papua New Guinea is reported to have base-15 numbers. Ngui means 15, ngui ki means 15 × 2 = 30, and ngui ngui means 15 × 15 = 225. Umbu-Ungu, also known as Kakoli, is reported to have base-24 numbers. Tokapu means 24, tokapu talu means 24 × 2 = 48, and tokapu tokapu means 24 × 24 = 576. Ngiti is reported to have a base-32 number system with base-4 cycles. The Ndom language of Papua New Guinea is reported to have base-6 numerals. Mer means 6, mer an thef means 6 × 2 = 12, nif means 36, and nif thef means 36×2 = 72. ==Notes==
