Lesson plan
DECT-2020
DECT-2020, also called NR+, is a radio standard by ETSI for the DECT bands worldwide. The standard was designed to meet a subset of the ITU IMT-2020 5G requirements that are applicable to IOT and Industrial internet of things. DECT-2020 is compliant with the requirements for Ultra Reliable Low Latency Communications URLLC and massive Machine Type Communication (mMTC) of IMT-2020. DECT-2020 NR has new capabilities compared to DECT and DECT Evolution: * Better multipath operation (OFDM Cyclic Prefix) * Better radio sensitivity (OFDM and Turbocodes) * Better resistance to radio interference (co-channel interference rejection) * Better bandwidth utilization * Mesh deployment The DECT-2020 standard has been designed to co-exist in the DECT radio band with existing DECT deployments. It uses the same Time Division slot timing and Frequency Division center frequencies and uses pre-transmit scanning to minimize co-channel interference.
Article summary
DECT-2020, also called NR+, is a radio standard by ETSI for the DECT bands worldwide. The standard was designed to meet a subset of the ITU IMT-2020 5G requirements that are applicable to IOT and Industrial internet of things. DECT-2020 is compliant with the requirements for Ultra Reliable Low Latency Communications URLLC and massive Machine Type Communication (mMTC) of IMT-2020. DECT-2020 NR has new capabilities compared to DECT and DECT Evolution: * Better multipath operation (OFDM Cyclic Prefix) * Better radio sensitivity (OFDM and Turbocodes) * Better resistance to radio interference (co-channel interference rejection) * Better bandwidth utilization * Mesh deployment The DECT-2020 standard has been designed to co-exist in the DECT radio band with existing DECT deployments. It uses the same Time Division slot timing and Frequency Division center frequencies and uses pre-transmit scanning to minimize co-channel interference.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.