Lesson plan
Defibrator
The defibrator is a machine used as part of the manufacturing process for MDF man-made wooden board. It produces fine wooden fibres, finer than the cut chips used to make chipboard. Although small, these fibres retain good structural integrity. The machine itself is a thermo mechanical pulping refiner in which the pulp material, such as wood chips, is ground in an environment of steam between a rotating grinding disc (rotor) and a stationary disc (stator) each with radial grooves that provides the grinding surface. Wood chips are fed into the centre and are broken down as the centrifugal force pushes them towards the circumference of the discs where the grooves are finer to produce wood fibre. The size of the refined fibres can to some extent be controlled by altering the distance between the discs where a closer distance produces finer fibres but also requires higher grinding force. The capacity per machine is largely determined by the size of the machine, as well as the motor speed, which can be 1,500 or 1,800 rpm.
Article summary
The defibrator is a machine used as part of the manufacturing process for MDF man-made wooden board. It produces fine wooden fibres, finer than the cut chips used to make chipboard. Although small, these fibres retain good structural integrity. The machine itself is a thermo mechanical pulping refiner in which the pulp material, such as wood chips, is ground in an environment of steam between a rotating grinding disc (rotor) and a stationary disc (stator) each with radial grooves that provides the grinding surface. Wood chips are fed into the centre and are broken down as the centrifugal force pushes them towards the circumference of the discs where the grooves are finer to produce wood fibre. The size of the refined fibres can to some extent be controlled by altering the distance between the discs where a closer distance produces finer fibres but also requires higher grinding force. The capacity per machine is largely determined by the size of the machine, as well as the motor speed, which can be 1,500 or 1,800 rpm.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.