Lesson plan
Demulsifier
Demulsifiers, or emulsion breaker s, are a class of specialty chemicals used to separate emulsions, for example, water in oil. They are commonly used in the processing of crude oil, which is typically produced along with significant quantities of saline water. This water (and salt) must be removed from the crude oil prior to refining. If the majority of the water and salt are not removed, significant corrosion problems can occur in the refining process. Demulsifiers are typically based on the following chemistry: * Acid catalysed phenol-formaldehyde resins * Base catalysed phenol-formaldehyde resins * Epoxy resins * Polyethyleneimines * Polyamines * Di-epoxides * Polyols * dendrimer The above are usually ethoxylated (and/or propoxylated) to provide the desired degree of water/oil solubility. The addition of ethylene oxide increases water solubility, propylene oxide decreases it. Commercially available demulsifier formulations are typically a mixture of two to four different chemistries, in carrier solvent(s) such as xylene, heavy aromatic naphtha (HAN), Isopropanol, methanol, 2-Ethylhexanol or diesel.
Article summary
Demulsifiers, or emulsion breaker s, are a class of specialty chemicals used to separate emulsions, for example, water in oil. They are commonly used in the processing of crude oil, which is typically produced along with significant quantities of saline water. This water (and salt) must be removed from the crude oil prior to refining. If the majority of the water and salt are not removed, significant corrosion problems can occur in the refining process. Demulsifiers are typically based on the following chemistry: * Acid catalysed phenol-formaldehyde resins * Base catalysed phenol-formaldehyde resins * Epoxy resins * Polyethyleneimines * Polyamines * Di-epoxides * Polyols * dendrimer The above are usually ethoxylated (and/or propoxylated) to provide the desired degree of water/oil solubility. The addition of ethylene oxide increases water solubility, propylene oxide decreases it. Commercially available demulsifier formulations are typically a mixture of two to four different chemistries, in carrier solvent(s) such as xylene, heavy aromatic naphtha (HAN), Isopropanol, methanol, 2-Ethylhexanol or diesel.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.