Density

Density (volumetric mass density or specific mass) is the ratio of a substance's mass to its volume.

Uses your system voice; voice and rate in settings.

≈ 25 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Density (volumetric mass density or specific mass) is the ratio of a substance's mass to its volume. The symbol most often used for density is ρ (the lower case Greek letter rho), although the Latin letter D (or d) can also be used:[1] ρ=mV, where ρ is the density, m is the mass, and V is the volume. In some cases (for instance, in the United States oil and gas industry), density is loosely defined as its weight per unit volume,[2] although this is scientifically inaccurate – this quantity is more specifically called specific weight.

For a pure substance, the density is equal to its mass concentration. Different materials usually have different densities, and density may be relevant to buoyancy, purity and packaging. Osmium is the densest known element at standard conditions for temperature and pressure.

To simplify comparisons of density across different systems of units, it is sometimes replaced by the dimensionless quantity "relative density" or "specific gravity", i.e. the ratio of the density of the material to that of a standard material, usually water. Thus a relative density less than one relative to water means that the substance floats in water.

The density of a material varies with temperature and pressure. This variation is typically small for solids and liquids but much greater for gases. Increasing the pressure on an object decreases the volume of the object and thus increases its density. Increasing the temperature of a substance while maintaining a constant pressure decreases its density by increasing its volume (with a few exceptions). In most fluids, heating the bottom of the fluid results in convection due to the decrease in the density of the heated fluid, which causes it to rise relative to denser unheated material.

The reciprocal of the density of a substance is occasionally called its specific volume, a term sometimes used in thermodynamics. Density is an intensive property in that increasing the amount of a substance does not increase its density; rather it increases its mass.

Other conceptually comparable quantities or ratios include specific density, relative density (specific gravity), and specific weight.

The concept of mass density is generalized in the International System of Quantities to volumic quantities, the quotient of any physical quantity and volume,[3] such as charge density or volumic electric charge.[4]

  • 2 Units
  • 3 Measurement
  • 4 Changes of density
  • 5 Density of solutions
  • 6 List of densities
  • 7 Generalization: volumic quantities
  • 8 See also
  • 9 References
  • 10 External links
  • History

    edit edit source

    Density, floating, and sinking

    edit edit source

    The understanding that different materials have different densities, and of a relationship between density, floating, and sinking must date to prehistoric times. Much later it was put in writing. Aristotle, for example, wrote:[5]

    There is so great a difference in density between salt and fresh water that vessels laden with cargoes of the same weight almost sink in rivers, but ride quite easily at sea and are quite seaworthy. And an ignorance of this has sometimes cost people dear who load their ships in rivers. The following is a proof that the density of a fluid is greater when a substance is mixed with it. If you make water very salt by mixing salt in with it, eggs will float on it. ... If there were any truth in the stories they tell about the lake in Palestine it would further bear out what I say. For they say if you bind a man or beast and throw him into it he floats and does not sink beneath the surface.

    — Aristotle, Meteorologica, Book II, Chapter III

    Volume vs. density; volume of an irregular shape

    edit edit source

    In a well-known but probably apocryphal tale, Archimedes was given the task of determining whether King Hiero's goldsmith was embezzling gold during the manufacture of a golden wreath dedicated to the gods and replacing it with another, cheaper alloy.[6] Archimedes knew that the irregularly shaped wreath could be crushed into a cube whose volume could be calculated easily and compared with the mass; but the king did not approve of this. Baffled, Archimedes is said to have taken an immersion bath and observed from the rise of the water upon entering that he could calculate the volume of the gold wreath through the displacement of the water. Upon this discovery, he leapt from his bath and ran naked through the streets shouting, "Eureka! Eureka!" (Ancient Greek: Εύρηκα!, lit. 'I have found it'). As a result, the term eureka entered common parlance and is used today to indicate a moment of enlightenment.

    The story first appeared in written form in Vitruvius' books of architecture, two centuries after it supposedly took place.[7] Some scholars have doubted the accuracy of this tale, saying among other things that the method would have required precise measurements that would have been difficult to make at the time.[8][9]

    Nevertheless, in 1586, Galileo Galilei, in one of his first experiments, made a possible reconstruction of how the experiment could have been performed with ancient Greek resources.[10]

    Units

    edit edit source

    From the equation for density ( ρ = m/V), mass density has any unit that is mass divided by volume. As there are many units of mass and volume covering many different magnitudes there are a large number of units for mass density in use. The SI unit of kilogram per cubic metre (kg/m3) and the cgs unit of gram per cubic centimetre (g/cm3) are probably the most commonly used units for density. In industry, other larger or smaller units of mass and or volume are often more practical and US customary units may be used. See below for a list of some of the most common units of density.

    Densities using the following metric units all have exactly the same numerical value, one-thousandth of the value in kg/m3. Liquid water has a density of about 1 g/cm3 or 1000 kg/m3, making any of these SI units numerically convenient to use as most solids and liquids have densities between 0.1 and 20 g/cm3.

    Units employing the metric units litre and tonne (metric ton), which are not part of the SI, include:

    In US customary units density can be stated in:

    Imperial units differing from the above (as the Imperial gallon and bushel differ from the US units) in practice are rarely used, though found in older documents. The Imperial gallon was based on the concept that an Imperial fluid ounce of water would have a mass of one Avoirdupois ounce, and indeed 1 g/cm3 ≈ 1.00224129 ounces per Imperial fluid ounce = 10.0224129 pounds per Imperial gallon. The density of precious metals could conceivably be based on Troy ounces and pounds, a possible cause of confusion.

    The density of a crystalline material and be calculated from its formula mass (in daltons) and the volume of its unit cell, the density can be calculated. One dalton per cubic ångström is equal to a density of 1.66053906892(52) g/cm3, based on the 2022 CODATA recommended value of the dalton.[11]

    Measurement

    edit edit source

    A number of techniques as well as standards exist for the measurement of density of materials. Such techniques include the use of a hydrometer (a buoyancy method for liquids), hydrostatic weighing (a buoyancy method for liquids and solids), immersed body method (a buoyancy method for liquids), pycnometer (liquids and solids), air comparison pycnometer (solids), oscillating U-tube (liquids), as well as pour and tap (solids).[12] However, each individual method or technique measures different types of density (e.g. bulk density, skeletal density, etc.), and therefore it is necessary to have an understanding of the type of density being measured as well as the type of material in question.

    Homogeneous materials

    edit edit source

    The density at all points of a homogeneous object equals its total mass divided by its total volume. The mass is normally measured with a scale or balance; the volume may be measured directly (from the geometry of the object) or by the displacement of a fluid. To determine the density of a liquid or a gas, a hydrometer, a dasymeter or a Coriolis flow meter may be used, respectively. Similarly, hydrostatic weighing uses the displacement of water due to a submerged object to determine the density of the object.

    Heterogeneous materials

    edit edit source

    If the body is not homogeneous, then its density varies between different regions of the object. In that case the density around any given location is determined by calculating the density of a small volume around that location. In the limit of an infinitesimal volume the density of an inhomogeneous object at a point becomes: ρ(r→)=dm/dV, where dV is an elementary volume at position r→. The mass of the body then can be expressed as m=∫Vρ(r→)dV.

    Non-compact materials

    edit edit source

    In practice, bulk materials such as sugar, sand, or snow contain voids. Many materials exist in nature as flakes, pellets, or granules.

    Voids are regions which contain something other than the considered material. Commonly the void is air, but it could also be vacuum, liquid, solid, or a different gas or gaseous mixture.

    The bulk volume of a material—inclusive of the void space fraction—is often obtained by a simple measurement (e.g. with a calibrated measuring cup) or geometrically from known dimensions.

    Mass divided by bulk volume determines bulk density. This is not the same thing as the material volumetric mass density. To determine the material volumetric mass density, one must first discount the volume of the void fraction. Sometimes this can be determined by geometrical reasoning. For the close-packing of equal spheres the non-void fraction can be at most about 74%. It can also be determined empirically. Some bulk materials, however, such as sand, have a variable void fraction which depends on how the material is agitated or poured. It might be loose or compact, with more or less air space depending on handling.

    In practice, the void fraction is not necessarily air, or even gaseous. In the case of sand, it could be water, which can be advantageous for measurement as the void fraction for sand saturated in water—once any air bubbles are thoroughly driven out—is potentially more consistent than dry sand measured with an air void.

    In the case of non-compact materials, one must also take care in determining the mass of the material sample. If the material is under pressure (commonly ambient air pressure at the earth's surface) the determination of mass from a measured sample weight might need to account for buoyancy effects due to the density of the void constituent, depending on how the measurement was conducted. In the case of dry sand, sand is so much denser than air that the buoyancy effect is commonly neglected (less than one part in one thousand).

    Mass change upon displacing one void material with another while maintaining constant volume can be used to estimate the void fraction, if the difference in density of the two voids materials is reliably known.

    Changes of density

    edit edit source

    In general, density can be changed by changing either the pressure or the temperature. Increasing the pressure always increases the density of a material. Increasing the temperature generally decreases the density, but there are notable exceptions to this generalization. For example, the density of water increases between its melting point at 0 °C and 4 °C; similar behavior is observed in silicon at low temperatures.

    The effect of pressure and temperature on the densities of liquids and solids is small. The compressibility for a typical liquid or solid is 10−6 bar−1 (1 bar = 0.1 MPa) and a typical thermal expansivity is 10−5 K−1. This roughly translates into needing around ten thousand times atmospheric pressure to reduce the volume of a substance by one percent. (Although the pressures needed may be around a thousand times smaller for sandy soil and some clays.) A one percent expansion of volume typically requires a temperature increase on the order of thousands of degrees Celsius.

    In contrast, the density of gases is strongly affected by pressure. The density of an ideal gas is ρ=MPRT, where M is the molar mass, P is the pressure, R is the universal gas constant, and T is the absolute temperature. This means that the density of an ideal gas can be doubled by doubling the pressure, or by halving the absolute temperature.

    In the case of volumic thermal expansion at constant pressure and small intervals of temperature the temperature dependence of density is ρ=ρT01+α⋅ΔT, where ρT0 is the density at a reference temperature, α is the thermal expansion coefficient of the material at temperatures close to T0.

    Density of solutions

    edit edit source

    The density of a solution is the sum of mass (massic) concentrations of the components of that solution.

    Mass (massic) concentration of each given component ρi in a solution sums to density of the solution, ρ=∑iρi.

    Expressed as a function of the densities of pure components of the mixture and their volume participation, it allows the determination of excess molar volumes: ρ=∑iρiViV=∑iρiφi=∑iρiVi∑iVi+∑iVEi, provided that there is no interaction between the components.

    Knowing the relation between excess volumes and activity coefficients of the components, one can determine the activity coefficients: VE‾i=RT∂ln⁡γi∂P.

    List of densities

    edit edit source

    Various materials

    edit edit source
    Densities of various materials covering a range of values
    Material ρ (kg/m3)[note 1] Notes
    Hydrogen 0.0898
    Helium 0.179
    Aerographite 0.2 [note 2][13][14]
    Metallic microlattice 0.9 [note 2]
    Aerogel 1.0 [note 2]
    Air 1.2 At sea level
    Tungsten hexafluoride 12.4 One of the heaviest known gases at standard conditions
    Liquid hydrogen 70 At approximately −255 °C
    Styrofoam 75 Approximate[15]
    Cork 240 Approximate[15]
    Pine 373 [16]
    Lithium 535 Least dense metal
    Wood 700 Seasoned, typical[17][18]
    Oak 710 [16]
    Potassium 860 [19]
    Ice 916.7 At temperature < 0 °C
    Cooking oil 910–930
    Sodium 970
    Water (fresh) 1,000 Maximum, occurs at approximately 4 °C
    Water (salt) 1,030 Salinity of 3%
    Liquid oxygen 1,141 At approximately −219 °C
    Nylon 1,150
    Plastics 1,175 Approximate; for polypropylene and PETE/PVC
    Glycerol 1,261 [20]
    Tetrachloroethene 1,622
    Sand 1,600 Between 1,600 and 2,000 [21]
    Magnesium 1,740
    Beryllium 1,850
    Silicon 2,330
    Concrete 2,400 [22][23]
    Glass 2,500 [24]
    Quartzite 2,600 [21]
    Granite 2,700 [21]
    Gneiss 2,700 [21]
    Aluminium 2,700
    Limestone 2,750 Compact[21]
    Basalt 3,000 [21]
    Diiodomethane 3,325 Liquid at room temperature
    Diamond 3,500
    Titanium 4,540
    Selenium 4,800
    Vanadium 6,100
    Antimony 6,690
    Zinc 7,000
    Chromium 7,200
    Tin 7,310
    Manganese 7,325 Approximate
    Mild steel 7,850
    Iron 7,870
    Niobium 8,570
    Brass 8,600 [23]
    Cadmium 8,650
    Cobalt 8,900
    Nickel 8,900
    Copper 8,940
    Bismuth 9,750
    Molybdenum 10,220
    Silver 10,500
    Lead 11,340
    Thorium 11,700
    Rhodium 12,410
    Mercury 13,546
    Tantalum 16,600
    Uranium 19,100
    Tungsten 19,300
    Gold 19,320
    Plutonium 19,840
    Rhenium 21,020
    Platinum 21,450
    Iridium 22,420
    Osmium 22,570 Densest natural element on Earth
    1. ^ Unless otherwise noted, all densities given are at standard conditions for temperature and pressure,
      that is, 273.15 K (0.00 °C) and 100 kPa (0.987 atm).
      Wikipedia revision 1375131411, retrieved 2026-11-22
    2. ^ a b c Air contained in material excluded when calculating density Wikipedia revision 1375131411, retrieved 2026-11-22

    Others

    edit edit source
    Entity ρ (kg/m3) Notes
    Interstellar medium 1.7×10−26 Based on 10−5 hydrogen atoms per cubic centimetre[25]
    Local Interstellar Cloud 5×10−22 Based on 0.3 hydrogen atoms per cubic centimetre[25]
    Interstellar medium 1.7×10−16 Based on 105 hydrogen atoms per cubic centimetre[25]
    The Earth 5,515 Mean density.[26]
    Earth's inner core 13,000 Approx., as listed in Earth.[27]
    The core of the Sun 33,000–160,000 Approx.[28]
    White dwarf star 2.1×109 Approx.[29]
    Atomic nuclei 2.3×1017 Does not depend strongly on size of nucleus[30]
    Neutron star 1×1018
    Planck density 5.155×1096

    Water

    edit edit source
    Density of liquid water at 1 atm pressure
    Temp. (°C)[note 1] Density (kg/m3)
    −30 983
    .854
    −20 993
    .547
    −10 998
    .117
    0 999
    .8395
    4 999
    .9720
    10 999
    .7026
    15 999
    .1026
    20 998
    .2071
    22 997
    .7735
    25 997
    .0479
    30 995
    .6502
    40 992
    .2
    60 983
    .2
    80 971
    .8
    100 958
    .4

    Notes:

    1. ^ Values below 0 °C refer to supercooled water. Wikipedia revision 1375131411, retrieved 2026-11-22

    Air

    edit edit source
    Density of air at 1 atm pressure
    T (°C) ρ (kg/m3)
    −25 1.423
    −20 1.395
    −15 1.368
    −10 1.342
    −5 1.316
    0 1.293
    5 1.269
    10 1.247
    15 1.225
    20 1.204
    25 1.184
    30 1.164
    35 1.146

    Molar volumes of liquid and solid phase of elements

    edit edit source

    Generalization: volumic quantities

    edit edit source

    The qualifier volumic is recommended in the International System of Quantities (ISO 80000-1) to denote the quotient of any physical quantity by volume.[3] The expressions "per unit volume" or "volume ... density" (or simply "density") are also often used, with resulting units involving reciprocal cubic metre (m−3), for example:

    See also

    edit edit source

    References

    edit edit source
    1. ^ "Gas Density". Glenn Research Center. National Aeronautic and Space Administration. Archived from the original on April 14, 2013. Retrieved April 9, 2013. Wikipedia revision 1375131411, retrieved 2026-11-22
    2. ^ "Density definition". Oil Gas Glossary. Archived from the original on August 5, 2010. Retrieved September 14, 2010. Wikipedia revision 1375131411, retrieved 2026-11-22
    3. ^ a b c d e "ISO 80000-1: Quantities and units — Part 1: General". iso.org. Retrieved October 16, 2023. Wikipedia revision 1375131411, retrieved 2026-11-22
    4. ^ a b "IEC 80000-6:2022 Quantities and units — Part 6: Electromagnetism". International Organization for Standardization. Retrieved November 20, 2022. Wikipedia revision 1375131411, retrieved 2026-11-22
    5. ^ Aristotle. (1952) [c. 340 BC]. Meteorologica (in Ancient Greek and English). Translated by Lee, H. D. P. Harvard University Press. pp. 2.3, 359a. Wikipedia revision 1375131411, retrieved 2026-11-22
    6. ^ Archimedes, A Gold Thief and Buoyancy Archived August 27, 2007, at the Wayback Machine – by Larry "Harris" Taylor, Ph.D. Wikipedia revision 1375131411, retrieved 2026-11-22
    7. ^ Vitruvius on Architecture, Book IX, paragraphs 9–12, translated into English and in the original Latin. Wikipedia revision 1375131411, retrieved 2026-11-22
    8. ^ "EXHIBIT: The First Eureka Moment". Science. 305 (5688) 1219e. 2004. doi:10.1126/science.305.5688.1219e. Wikipedia revision 1375131411, retrieved 2026-11-22
    9. ^ Biello, David (December 8, 2006). "Fact or Fiction?: Archimedes Coined the Term "Eureka!" in the Bath". Scientific American. Wikipedia revision 1375131411, retrieved 2026-11-22
    10. ^ La Bilancetta, Complete text of Galileo's treatise in the original Italian together with a modern English translation [1] Wikipedia revision 1375131411, retrieved 2026-11-22
    11. ^ "2022 CODATA Value: atomic mass constant". NIST. May 2024. Retrieved June 8, 2025. Wikipedia revision 1375131411, retrieved 2026-11-22
    12. ^ "Test No. 109: Density of Liquids and Solids". OECD Guidelines for the Testing of Chemicals, Section 1: 6. October 2, 2012. doi:10.1787/9789264123298-en. ISBN 978-92-64-12329-8. ISSN 2074-5753.{{cite journal}}: CS1 maint: periodical has ISBN (link) Wikipedia revision 1375131411, retrieved 2026-11-22
    13. ^ New carbon nanotube struructure aerographite is lightest material champ Archived October 17, 2013, at the Wayback Machine. Phys.org (July 13, 2012). Retrieved on July 14, 2012. Wikipedia revision 1375131411, retrieved 2026-11-22
    14. ^ Aerographit: Leichtestes Material der Welt entwickelt – SPIEGEL ONLINE Archived October 17, 2013, at the Wayback Machine. Spiegel.de (July 11, 2012). Retrieved on July 14, 2012. Wikipedia revision 1375131411, retrieved 2026-11-22
    15. ^ a b "Re: which is more bouyant [sic] styrofoam or cork". Madsci.org. Archived from the original on February 14, 2011. Retrieved September 14, 2010. Wikipedia revision 1375131411, retrieved 2026-11-22
    16. ^ a b Serway, Raymond; Jewett, John (2005), Principles of Physics: A Calculus-Based Text, Cengage Learning, p. 467, ISBN 0-534-49143-X, archived from the original on May 17, 2016 Wikipedia revision 1375131411, retrieved 2026-11-22
    17. ^ "Wood Densities". www.engineeringtoolbox.com. Archived from the original on October 20, 2012. Retrieved October 15, 2012. Wikipedia revision 1375131411, retrieved 2026-11-22
    18. ^ "Density of Wood". www.simetric.co.uk. Archived from the original on October 26, 2012. Retrieved October 15, 2012. Wikipedia revision 1375131411, retrieved 2026-11-22
    19. ^ Bolz, Ray E.; Tuve, George L., eds. (1970). "§1.3 Solids—Metals: Table 1-59 Metals and Alloys—Miscellaneous Properties". CRC Handbook of tables for Applied Engineering Science (2nd ed.). CRC Press. p. 117. ISBN 978-1-315-21409-2. Wikipedia revision 1375131411, retrieved 2026-11-22
    20. ^ glycerol composition at Archived February 28, 2013, at the Wayback Machine. Physics.nist.gov. Retrieved on July 14, 2012. Wikipedia revision 1375131411, retrieved 2026-11-22
    21. ^ a b c d e f Sharma, P.V. (1997), Environmental and Engineering Geophysics, Cambridge University Press, p. 17, doi:10.1017/CBO9781139171168, ISBN 978-1-139-17116-8 Wikipedia revision 1375131411, retrieved 2026-11-22
    22. ^ "Density of Concrete - The Physics Factbook". hypertextbook.com. Wikipedia revision 1375131411, retrieved 2026-11-22
    23. ^ a b Young, Hugh D.; Freedman, Roger A. (2012). University Physics with Modern Physics. Addison-Wesley. p. 374. ISBN 978-0-321-69686-1. Wikipedia revision 1375131411, retrieved 2026-11-22
    24. ^ "Density of Glass - The Physics Factbook". hypertextbook.com. Wikipedia revision 1375131411, retrieved 2026-11-22
    25. ^ a b c "Our Local Galactic Neighborhood". Interstellar Probe Project. NASA. 2000. Archived from the original on November 21, 2013. Retrieved August 8, 2012. Wikipedia revision 1375131411, retrieved 2026-11-22
    26. ^ Density of the Earth, wolframalpha.com, archived from the original on October 17, 2013 Wikipedia revision 1375131411, retrieved 2026-11-22
    27. ^ Density of Earth's core, wolframalpha.com, archived from the original on October 17, 2013 Wikipedia revision 1375131411, retrieved 2026-11-22
    28. ^ Density of the Sun's core, wolframalpha.com, archived from the original on October 17, 2013 Wikipedia revision 1375131411, retrieved 2026-11-22
    29. ^ Johnson, Jennifer. "Extreme Stars: White Dwarfs & Neutron Stars]" (PDF). lecture notes, Astronomy 162. Ohio State University. Archived from the original (PDF) on September 25, 2007. Wikipedia revision 1375131411, retrieved 2026-11-22
    30. ^ "Nuclear Size and Density". HyperPhysics. Georgia State University. Archived from the original on July 6, 2009. Wikipedia revision 1375131411, retrieved 2026-11-22
    31. ^ "ISO 80000-4:2019 Quantities and units — Part 4: Mechanics". International Organization for Standardization. Retrieved September 15, 2019. Wikipedia revision 1375131411, retrieved 2026-11-22
    32. ^ "ISO 80000-10:2019 Quantities and units — Part 10: Atomic and nuclear physics". International Organization for Standardization. Retrieved September 15, 2019. Wikipedia revision 1375131411, retrieved 2026-11-22
    edit edit source Mole conceptsConstants Physical quantities Laws InternationalNational

    Text derived from https://en.wikipedia.org/w/index.php?oldid=1375131411 under CC BY-SA 4.0; modifications have been made.

    Words in each sectionList of densitiesList of densitiesList of densities: 719 words719MeasurementMeasurementMeasurement: 667 words667UnitsUnitsUnits: 523 words523HistoryHistoryHistory: 447 words447Changes of densityChanges of densityChanges of density: 282 words282Generalization: volumic…Generalization: volumic quantitiesGeneralization: volumic quantities: 125 words125Density of solutionsDensity of solutionsDensity of solutions: 108 words108See alsoSee alsoSee also: 55 words55
    Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

    Provenance

    snapshot enwiki-001375131411 · captured 2026-09-15 · ledger · version history

    Cite this page as: encyclopegia.org, “Density”, snapshot enwiki-001375131411. https://encyclopegia.org/a/density