Lesson plan

Design flow

Design flows, often known as RTL to GDSII, are the explicit combination of electronic design automation tools to accomplish the design of an integrated circuit. They start with a textual description of the proposed chip operation, written in a register transfer level (RTL) language such as Verilog. These are converted to a netlist by a logic synthesis tool, and the resulting gates are then placed, and routed. The result is an image of the chip to be fabricated, typically in the GDSII format.

Back to article

Article summary

Design flows, often known as RTL to GDSII, are the explicit combination of electronic design automation tools to accomplish the design of an integrated circuit. They start with a textual description of the proposed chip operation, written in a register transfer level (RTL) language such as Verilog. These are converted to a netlist by a logic synthesis tool, and the resulting gates are then placed, and routed. The result is an image of the chip to be fabricated, typically in the GDSII format.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.