Diesel cycle
The Diesel cycle is a combustion process of a reciprocating internal combustion engine.
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Diesel cycle is a combustion process of a reciprocating internal combustion engine. In it, fuel is ignited by heat generated during the compression of air in the combustion chamber, into which fuel is then injected. This is in contrast to igniting the fuel-air mixture with a spark plug as in the Otto cycle (four-stroke/petrol) engine.
Diesel engines are used in aircraft, automobiles, power generation, diesel–electric locomotives, and both surface ships and submarines. The Diesel cycle is assumed to have constant pressure during the initial part of the combustion phase ( V_2 to V_3 in the diagram, below).
This is an idealized mathematical model: real physical diesels do have an increase in pressure during this period, but it is less pronounced than in the Otto cycle. In contrast, the idealized Otto cycle of a gasoline engine approximates a constant volume process during that phase.
Net work produced = Q_{in} - Q_{out} The net work produced is also represented by the area enclosed by the cycle on the p–V diagram. The net work is produced per cycle and is also called the useful work, as it can be turned to other useful types of energy and propel a vehicle (kinetic energy) or produce electrical energy.
The summation of many such cycles per unit of time is called the developed power. The W_{out} is also called the gross work, some of which is used in the next cycle of the engine to compress the next charge of air. \eta_{th}=1-\frac{1}{r^{\gamma-1}}\left ( \frac{\alpha^{\gamma}-1}{\gamma(\alpha-1)} \right ) where \eta_{th} is thermal efficiency \alpha is the cut-off ratio \frac{V_3}{V_2} (ratio between the end and start volume for the combustion phase) is the compression ratio \frac{V_1}{V_2} \gamma is ratio of specific heats (C p /C v ) The cut-off ratio can be expressed in terms of temperature as shown below: \frac{T_2}{T_1} ={\left(\frac{V_1}{V_2}\right)^{\gamma-1}} = r^{\gamma-1} \displaystyle {T_2} ={T_1} r^{\gamma-1} \frac{V_3}{V_2} = \frac{T_3}{T_2} \alpha = \left(\frac{T_3}{T_1}\right)\left(\frac{1}{r^{\gamma-1}}\right) T_3 can be approximated to the flame temperature of the fuel used.
The flame temperature can be approximated to the adiabatic flame temperature of the fuel with corresponding air-to-fuel ratio and compression pressure, p_3 . T_1 can be approximated to the inlet air temperature. This formula only gives the ideal thermal efficiency.
The actual thermal efficiency will be significantly lower due to heat and friction losses. The formula is more complex than the Otto cycle (petrol/gasoline engine) relation that has the following formula: \eta_{otto,th}=1-\frac{1}{r^{\gamma-1}} The additional complexity for the Diesel formula comes around since the heat addition is at constant pressure and the heat rejection is at constant volume.
The Otto cycle by comparison has both the heat addition and rejection at constant volume.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1336428788 under CC BY-SA 4.0; modifications have been made.