Differential pulse-code modulation

Differential pulse-code modulation (DPCM) encodes changes between consecutive samples of a signal, rather than the signal's value directly (as done in pulse-code modulation).

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Differential pulse-code modulation (DPCM) encodes changes between consecutive samples of a signal, rather than the signal's value directly (as done in pulse-code modulation). Decoding might thus be done by some manner of integrating DPCM samples over time. The input can be an analog signal or a digital signal.

If the input is a continuous-time analog signal, it needs to be sampled to become a discrete-time signal. Two methods to encode each DPCM value are: * Method 1: First, quantize the samples (if not quantized already). The output is the difference between the current and previous sample. * Method 2: Quantize the difference between the current sample and the output of a local decoder.

Applying one of these two methods, short-term redundancy (positive correlation of nearby values) of the signal is eliminated; compression ratios on the order of 2 to 4 can be achieved if differences are subsequently entropy coded, because the entropy of the difference signal is much smaller than that of the original discrete signal treated as independent samples. But removing this redundancy makes the encoded signal more fragile.

Differential pulse-code modulation (DPCM) encodes changes between consecutive samples of a signal, rather than the signal's value directly (as done in pulse-code modulation). Decoding might thus be done by some manner of integrating DPCM samples over time. The input can be an analog signal or a digital signal.

If the input is a continuous-time analog signal, it needs to be sampled to become a discrete-time signal. Two methods to encode each DPCM value are: Method 1: First, quantize the samples (if not quantized already). The output is the difference between the current and previous sample.

Method 2: Quantize the difference between the current sample and the output of a local decoder. Applying one of these two methods, short-term redundancy (positive correlation of nearby values) of the signal is eliminated; compression ratios on the order of 2 to 4 can be achieved if differences are subsequently entropy coded, because the entropy of the difference signal is much smaller than that of the original discrete signal treated as independent samples.

But removing this redundancy makes the encoded signal more fragile.

See also

Adaptive differential pulse-code modulation Delta modulation, a special case of DPCM where the differences e Q [n] are represented with 1 bit as ±Δ Pulse modulation methods Delta-sigma modulation

Text derived from https://en.wikipedia.org/w/index.php?oldid=1322620448 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.