Lesson plan
Diffusion layer
In electrochemistry, the diffusion layer, according to IUPAC, is defined as the "region in the vicinity of an electrode where the concentrations are different from their value in the bulk solution. The definition of the thickness of the diffusion layer is arbitrary because the concentration approaches asymptotically the value in the bulk solution". The diffusion layer thus depends on the diffusion coefficient ( ) of the analyte and, for voltammetric measurements, on the scan rate (V/s). It is usually considered to be some multiple of \sqrt{Dt} (where \tfrac 1 t = scan rate). The value is physically relevant since the concentration of solute varies according to the expression derived from Fick's laws: \frac{c}{c*}=\operatorname{erf}\left(\frac{x}{2\sqrt{Dt}}\right) where is the error function. When x=\sqrt{Dt}, the concentration is approximately 52% of the bulk concentration: \operatorname{erf}(1/2)=0.520499878\dots At slow scan rates, the diffusion layer is large, on the order of micrometers, whereas at fast scan rates the diffusion layer is nanometers in thickness. The relationship is described in part by the Cottrell equation. Relevant to cyclic voltammetry, the diffusion layer has negligible volume compared the volume of the bulk solution. For this reason, cyclic voltammetry experiments have an inexhaustible supply of fresh analyte.…
Article summary
In electrochemistry, the diffusion layer, according to IUPAC, is defined as the "region in the vicinity of an electrode where the concentrations are different from their value in the bulk solution. The definition of the thickness of the diffusion layer is arbitrary because the concentration approaches asymptotically the value in the bulk solution". The diffusion layer thus depends on the diffusion coefficient ( ) of the analyte and, for voltammetric measurements, on the scan rate (V/s). It is usually considered to be some multiple of \sqrt{Dt} (where \tfrac 1 t = scan rate). The value is physically relevant since the concentration of solute varies according to the expression derived from Fick's laws: \frac{c}{c*}=\operatorname{erf}\left(\frac{x}{2\sqrt{Dt}}\right) where is the error function. When x=\sqrt{Dt}, the concentration is approximately 52% of the bulk concentration: \operatorname{erf}(1/2)=0.520499878\dots At slow scan rates, the diffusion layer is large, on the order of micrometers, whereas at fast scan rates the diffusion layer is nanometers in thickness. The relationship is described in part by the Cottrell equation. Relevant to cyclic voltammetry, the diffusion layer has negligible volume compared the volume of the bulk solution. For this reason, cyclic voltammetry experiments have an inexhaustible supply of fresh analyte.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.