Lesson plan
Diffusion pump
Diffusion pumps are high-vacuum pumps that use high-speed vapor jets to direct gas molecules to the exhaust. Invented by Wolfgang Gaede in 1915, they are used to produce high and ultra-high vacuum. Because they cannot discharge directly into the atmosphere, they require a mechanical backing pump. The original design used mercury as the working fluid. The design was subsequently improved by Irving Langmuir. Modern diffusion pumps typically use silicone, hydrocarbon, or polyphenyl ether oils as working fluids. A major disadvantage of diffusion pumps is the tendency of the working fluid to backstream into the vacuum chamber, potentially contaminating sensitive equipment.
Article summary
Diffusion pumps are high-vacuum pumps that use high-speed vapor jets to direct gas molecules to the exhaust. Invented by Wolfgang Gaede in 1915, they are used to produce high and ultra-high vacuum. Because they cannot discharge directly into the atmosphere, they require a mechanical backing pump. The original design used mercury as the working fluid. The design was subsequently improved by Irving Langmuir. Modern diffusion pumps typically use silicone, hydrocarbon, or polyphenyl ether oils as working fluids. A major disadvantage of diffusion pumps is the tendency of the working fluid to backstream into the vacuum chamber, potentially contaminating sensitive equipment.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.