Lesson plan

Digifold

Digifold is a new generation of four and six corner folding device for box gluers and associated machinery. Development began in the late 1990s, and was first exhibited at IPEX 2002 trade show. A system using Siemens S7-200 PLC and Siemens Servo controllers was developed throughout the late 1990s, into the year 2000. It was the first system, in the box folding industry, to use carbon fibre as a construction material (used in the drive shafts), and advanced aluminium (aluminum) alloys in the clamping devices. Although it was not the first servo driven backfolding system, it used advanced materials to improve speed and reduce cost over comparable systems (notably from Jagenberg, Bobst and others)

Back to article

Article summary

Digifold is a new generation of four and six corner folding device for box gluers and associated machinery. Development began in the late 1990s, and was first exhibited at IPEX 2002 trade show. A system using Siemens S7-200 PLC and Siemens Servo controllers was developed throughout the late 1990s, into the year 2000. It was the first system, in the box folding industry, to use carbon fibre as a construction material (used in the drive shafts), and advanced aluminium (aluminum) alloys in the clamping devices. Although it was not the first servo driven backfolding system, it used advanced materials to improve speed and reduce cost over comparable systems (notably from Jagenberg, Bobst and others)

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.