Digital Compression System

Digital Compression System, or DCS, is a sound system developed by Williams Electronics.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Digital Compression System, or DCS, is a sound system developed by Williams Electronics. This advanced sound board was used in Williams and Bally pinball games, coin-op arcade video games by Midway Manufacturing, and mechanical and video slot machines by Williams Gaming. This sound system became the standard for these game platforms.

The DCS Sound system was created by Williams sound engineers Matt Booty[1] and Ed Keenan, and further developed by Andrew Eloff.[2] The system uses four channels of 16-bit digital audio, usually with one channel used for music, and three for sound effects. DCS was designed to improve sound quality, and streamline sound development.[3]

Contents

Versions of DCS

edit edit source
  • DCS ROM-based mono: The first version of DCS used an Analog Devices ADSP2105 DSP (clocked at 10MHz) and a DMA-driven DAC, outputting in mono. This was used for the majority of Williams and Midway's pinball games (starting with 1993's Indiana Jones: The Pinball Adventure),[4] as well as Midway's video games, up until the late 1990s. The pinball game, The Twilight Zone, was originally supposed to use the DCS System, but because the DCS board was still in development at the time, all of the music and sounds for this game were reprogrammed for the Yamaha YM2151 / Harris CVSD sound board.[5]
    • DCS-95: This was a revised version of the original DCS System (allowing for 16MB of data instead of 8MB to be addressed), used for Williams and Midway's WPC-95 pinball system.
  • DCS2 ROM-based stereo: This version used the ADSP2104 DSP and two DMA-driven DACs, outputting in stereo. This was used in Midway's Zeus-based hardware, and in the short-lived Pinball 2000 platform.
  • DCS2 RAM-based stereo: This version used the ADSP2115 DSP and two DMA-driven DACs, outputting in stereo. This was used in Midway's 3DFX-based hardware (NFL Blitz, etc.). This system would be adopted by Atari Games, following their acquisition by WMS Industries.
  • DCS2 RAM-based multi-channel: This version used the ADSP2181 DSP and up to six DMA-driven DACs, outputting in multichannel sound.

Pinball games using DCS

edit edit source

Arcade games using DCS

edit edit source

References

edit edit source
  1. ^ "Biography Matt Booty" (PDF). www.cla.purdue.edu. Archived from the original (PDF) on September 20, 2016. Retrieved December 8, 2010. Wikipedia revision 1374222446, retrieved 2026-11-19
  2. ^ Andrew Eloff's LinkedIn page naming DCS games he developed the sound system for Retrieved on 9 May 2016 Wikipedia revision 1374222446, retrieved 2026-11-19
  3. ^ Horowitz, Ken (2023). From Pinballs to Pixels: An Arcade History of Williams-Bally-Midway. McFarland & Company. p. 294. ISBN 978-1-4766-8937-1. Wikipedia revision 1374222446, retrieved 2026-11-19
  4. ^ "The DCS System". www.planetarypinball.com. 1996. Retrieved 2025-08-18. Wikipedia revision 1374222446, retrieved 2026-11-19
  5. ^ Booty, Matt; Karstens, Rich; Granner, Chris. "DCS history". GitHub. Retrieved 2026-08-08. Wikipedia revision 1374222446, retrieved 2026-11-19
edit edit source

Text derived from https://en.wikipedia.org/w/index.php?oldid=1374222446 under CC BY-SA 4.0; modifications have been made.