Lesson plan
DIII-D
DIII-D also known as "D3D" is a tokamak that has been operated since the late 1980s by General Atomics (GA) in San Diego, California, for the United States Department of Energy. The DIII-D National Fusion Facility is part of the ongoing effort to achieve magnetically confined fusion. The mission of the DIII-D Research Program is to establish the scientific basis for the optimization of the tokamak approach to fusion energy production. DIII-D was built on the basis of the earlier Doublet III, the third in a series of machines built at GA to experiment with tokamaks having non-circular plasma cross sections. This work demonstrated that certain shapes strongly suppressed a variety of instabilities in the plasma, which led to much higher plasma pressure and performance. DIII-D is so-named because the plasma is shaped like the letter D, a shaping that is now widely used on modern designs, and has led to the class of machines known as "advanced tokamaks." Advanced tokamaks are characterized by operation at high plasma β through strong plasma shaping, active control of various plasma instabilities, and achievement of steady-state current and pressure profiles that produce high energy confinement for high fusion gain (ratio of fusion power to heating power). DIII-D is one of two large magnetic fusion experiments in the U.S.…
Article summary
DIII-D also known as "D3D" is a tokamak that has been operated since the late 1980s by General Atomics (GA) in San Diego, California, for the United States Department of Energy. The DIII-D National Fusion Facility is part of the ongoing effort to achieve magnetically confined fusion. The mission of the DIII-D Research Program is to establish the scientific basis for the optimization of the tokamak approach to fusion energy production. DIII-D was built on the basis of the earlier Doublet III, the third in a series of machines built at GA to experiment with tokamaks having non-circular plasma cross sections. This work demonstrated that certain shapes strongly suppressed a variety of instabilities in the plasma, which led to much higher plasma pressure and performance. DIII-D is so-named because the plasma is shaped like the letter D, a shaping that is now widely used on modern designs, and has led to the class of machines known as "advanced tokamaks." Advanced tokamaks are characterized by operation at high plasma β through strong plasma shaping, active control of various plasma instabilities, and achievement of steady-state current and pressure profiles that produce high energy confinement for high fusion gain (ratio of fusion power to heating power). DIII-D is one of two large magnetic fusion experiments in the U.S.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.