Dinic's algorithm
Dinic's algorithm or Dinitz's algorithm is a strongly polynomial algorithm for computing the maximum flow in a flow network, conceived in 1970 by Israeli (formerly Soviet) computer scientist Yefim Dinitz.
≈ 9 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Dinic's algorithm or Dinitz's algorithm is a strongly polynomial algorithm for computing the maximum flow in a flow network, conceived in 1970 by Israeli (formerly Soviet) computer scientist Yefim Dinitz.[1] The algorithm runs in O(|V|2|E|) time and is similar to the Edmonds–Karp algorithm, which runs in O(|V||E|2) time, in that it uses shortest augmenting paths. The introduction of the concepts of the level graph and blocking flow enable Dinic's algorithm to achieve its performance.
Contents
History
edit edit sourceDinitz invented the algorithm in January 1969, as a master's student in Georgy Adelson-Velsky's group. A few decades later, he would recall:[2]
In Adel'son-Vel'sky's Algorithms class, the lecturer had a habit of giving the problem to be discussed at the next meeting as an exercise to students. The DA was invented in response to such an exercise. At that time, the author was not aware of the basic facts regarding [the Ford–Fulkerson algorithm] ...
Ignorance sometimes has its merits. Very probably, DA would not have been invented then, if the idea of possible saturated edge desaturation had been known to the author.
In 1970, Dinitz published a description of the algorithm in Doklady Akademii Nauk SSSR. In 1974, Shimon Even and (his then Ph.D. student) Alon Itai at the Technion in Haifa were very curious and intrigued by Dinitz's algorithm as well as Alexander V. Karzanov's related idea of blocking flow. However it was hard for them to decipher these two papers, each being limited to four pages to meet the restrictions of journal Doklady Akademii Nauk SSSR. Even did not give up, and after three days of effort managed to understand both papers except for the layered network maintenance issue. Over the next couple of years, Even gave lectures on "Dinic's algorithm", mispronouncing the name of the author while popularizing it. Even and Itai also contributed to this algorithm by combining BFS and DFS, which is how the algorithm is now commonly presented.[2]
For about 10 years of time after the Ford–Fulkerson algorithm was invented, it was unknown if it could be made to terminate in polynomial time in the general case of irrational edge capacities. This caused a lack of any known polynomial-time algorithm to solve the max flow problem in generic cases. Dinitz's algorithm and the Edmonds–Karp algorithm (published in 1972) both independently showed that in the Ford–Fulkerson algorithm, if each augmenting path is the shortest one, then the length of the augmenting paths is non-decreasing and the algorithm always terminates.
Definition
edit edit sourceLet G=((V,E),c,f,s,t) be a network with c(u,v) and f(u,v) the capacity and the flow of the edge (u,v), respectively.
- The residual capacity is a mapping cf:V×V→R+ defined as,
- if (u,v)∈E,
- cf(u,v)=c(u,v)−f(u,v)
- if (v,u)∈E,
- cf(u,v)=f(v,u)
- cf(u,v)=0 otherwise.
- if (u,v)∈E,
- The residual graph is an unweighted graph Gf=((V,Ef),cf|Ef,s,t), where
- Ef={(u,v)∈V×V:cf(u,v)>0}.
- An augmenting path is an s–t path in the residual graph Gf.
- Define dist(v) to be the length of the shortest path from s to v in Gf. Then the level graph of Gf is the graph GL=((V,EL),cf|EL,s,t), where
- EL={(u,v)∈Ef:dist(v)=dist(u)+1}.
- A blocking flow is an s–t flow f′ such that the graph G′=((V,EL′),s,t) with EL′={(u,v):f′(u,v)<cf|EL(u,v)} contains no s–t path. [Note 1][3]
Algorithm
edit edit sourceDinic's Algorithm
- Input: A network G=((V,E),c,s,t).
- Output: An s–t flow f of maximum value.
- Set f(e)=0 for each e∈E.
- Construct GL from Gf of G. If dist(t)=∞, stop and output f.
- Find a blocking flow f′ in GL.
- Augment flow f by f′ and go back to step 2.
Analysis
edit edit sourceIt can be shown that the number of layers in each blocking flow increases by at least 1 each time and thus there are at most |V|−1 blocking flows in the algorithm. For each of them:
- the level graph GL can be constructed by breadth-first search in O(E) time
- a blocking flow in the level graph GL can be found in O(VE) time[Note 2]
with total running time O(E+VE)=O(VE) for each layer. As a consequence, the running time of Dinic's algorithm is O(V2E).[2]
Using a data structure called dynamic trees, the running time of finding a blocking flow in each phase can be reduced to O(ElogV) and therefore the running time of Dinic's algorithm can be improved to O(VElogV).
Special cases
edit edit sourceIn networks with unit capacities, a much stronger time bound holds. Each blocking flow can be found in O(E) time, and it can be shown that the number of phases does not exceed O(E) and O(V2/3).[Note 3] Thus the algorithm runs in O(min{V2/3,E1/2}E) time.[4]
In networks that arise from the bipartite matching problem, the number of phases is bounded by O(V), therefore leading to the O(VE) time bound. The resulting algorithm is also known as Hopcroft–Karp algorithm. More generally, this bound holds for any unit network — a network in which each vertex, except for source and sink, either has a single entering edge of capacity one, or a single outgoing edge of capacity one, and all other capacities are arbitrary integers.[3]
Example
edit edit sourceThe following is a simulation of Dinic's algorithm. In the level graph GL, the vertices with labels in red are the values dist(v). The paths in blue form a blocking flow.
See also
edit edit sourceNotes
edit edit source- ^ This means that the subgraph resulting from removing all saturated edges (edges (u,v) with f′(u,v)=cf|EL(u,v)) does not contain any path from s to t. In other terms, the blocking flow is such that every possible path from s to t contains a saturated edge. Wikipedia revision 1374875607, retrieved 2026-11-19
- ^ Finding the blocking flow can be implemented in O(E) per path via a sequence of Advance and Retreat operations. See http://courses.csail.mit.edu/6.854/06/scribe/scribe11.pdf for more details. Wikipedia revision 1374875607, retrieved 2026-11-19
- ^ The O(V2/3) bound assumes that no two edges connect the same pair of vertices in the same direction, while the O(E) bound makes no such assumption. Wikipedia revision 1374875607, retrieved 2026-11-19
- ^ E. A. Dinic (1970). "Algorithm for solution of a problem of maximum flow in a network with power estimation" (PDF). Doklady Akademii Nauk SSSR. 11: 1277–1280.
- ^ a b c Dinitz, Yefim (2006). "Dinitz' Algorithm: The Original Version and Even's Version". In Oded Goldreich; Arnold L. Rosenberg; Alan L. Selman (eds.). Theoretical Computer Science: Essays in Memory of Shimon Even. Lecture Notes in Computer Science. Vol. 3895. Springer. pp. 218–240. doi:10.1007/11685654_10. ISBN 978-3-540-32880-3.
- ^ a b Tarjan 1983, p. 102.
- ^ Even, Shimon; Tarjan, R. Endre (1975). "Network Flow and Testing Graph Connectivity". SIAM Journal on Computing. 4 (4): 507–518. doi:10.1137/0204043. ISSN 0097-5397.
References
edit edit source- Dinitz, Yefim (2006). "Dinitz' Algorithm: The Original Version and Even's Version". In Oded Goldreich; Arnold L. Rosenberg; Alan L. Selman (eds.). Theoretical Computer Science: Essays in Memory of Shimon Even. Lecture Notes in Computer Science. Vol. 3895. Springer. pp. 218–240. doi:10.1007/11685654_10. ISBN 978-3-540-32880-3.
- Kadar, Ilan; Albagli, Sivan (18 April 2019). Dinitz's algorithm for finding a maximum flow in a network. Ben-Gurion University. Archived from the original on 22 December 2023.
- Korte, B. H.; Vygen, Jens (2008). "8.4 Blocking Flows and Fujishige's Algorithm". Combinatorial Optimization: Theory and Algorithms (Algorithms and Combinatorics, 21). Springer Berlin Heidelberg. pp. 174–176. ISBN 978-3-540-71844-4.
- Tarjan, R. E. (1983). Data structures and network algorithms.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1374875607 under CC BY-SA 4.0; modifications have been made.
References
- ↩Wikipedia “Dinic's algorithm” publication date (×1) · confidence 0.95 revision URL