Diode logic
in diode logic outputting a 3-bit binary index for a single High input. |372x372px Diode logic (or diode-resistor logic) constructs AND and OR logic gates with diodes and resistors.
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
in diode logic outputting a 3-bit binary index for a single High input. |372x372px Diode logic (or diode-resistor logic) constructs AND and OR logic gates with diodes and resistors. An active device (vacuum tubes with control grids in early electronic computers, then transistors in diode–transistor logic) is additionally required to provide logical inversion (NOT) for functional completeness and amplification for voltage level restoration, which diode logic alone can't provide.
Since voltage levels weaken with each diode logic stage, multiple stages can't easily be cascaded, limiting diode logic's usefulness. However, diode logic has the advantage of utilizing only cheap passive components.
in diode logic outputting a 3-bit binary index for a single High input. |372x372px]] Diode logic (or diode-resistor logic) constructs AND and OR logic gates with diodes and resistors. An active device (vacuum tubes with control grids in early electronic computers, then transistors in diode–transistor logic) is additionally required to provide logical inversion (NOT) for functional completeness and amplification for voltage level restoration, which diode logic alone can't provide.
Since voltage levels weaken with each diode logic stage, multiple stages can't easily be cascaded, limiting diode logic's usefulness. However, diode logic has the advantage of utilizing only cheap passive components.
Real diode considerations
current–voltage curve.]] For simplicity, diodes may sometimes be assumed to have no voltage drop or resistance when forward-biased and infinite resistance when reverse-biased. But real diodes are better approximated by the Shockley diode equation, which has a more complicated exponential current–voltage relationship called the diode law.
Designers must rely on a diode's specification sheet, which primarily provides a maximum forward voltage drop at one or more forward currents, a reverse leakage current (or saturation current), and a maximum reverse voltage limited by Zener or avalanche breakdown. Effects of temperature and process variation are usually included.
Typical examples: Germanium diode: Max forward voltage at 10 mA = 1 volt @ 0 to 85 °C Max reverse leakage current at 15 volts = 100 microamps @ 85 °C Silicon diode: Max forward voltage at 10 mA = 1 volt @ 0 to 125 °C Max reverse leakage current at 15 volts = 1 microamp @ 85 °C
Tunnel diodes
During the 1960s the use of tunnel diodes in logic circuits was an active research topic. When compared to transistor logic gates of the time, the tunnel diode offered much higher speeds. Unlike other diode types, the tunnel diode offered the possibility of amplification of signals at each stage.
The operating principles of a tunnel diode logic rely on biasing of the tunnel diode and supply of current from inputs over a threshold current, to switch the diode between two states. Consequently, tunnel diode logic circuits required a means to reset the diode after each logical operation.
However, a simple tunnel diode gate offered little isolation between inputs and outputs and had low fan in and fan out. More complex gates, with additional tunnel diodes and bias power supplies, overcame some of these limitations.
Advances in discrete and integrated circuit transistor speed and the more nearly unilateral nature of transistor amplifiers overtook the tunnel diode gate, resulting in it no longer being used in modern computers.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377574198 under CC BY-SA 4.0; modifications have been made.