direct-coupled amplifier

type of amplifier

Uses your system voice; voice and rate in settings.

Q4477697Snapshot

≈ 2 min read

Names in other languages

  • uzDoimiy tok kuchaytirgichlari
  • فارسیتقویت‌کننده با تزویج مستقیم
  • РусскийУсилитель постоянного тока
  • Englishdirect-coupled amplifier
  • العربيةمضخم مباشر الاقتران
  • 日本語直接結合増幅回路
  • 中文直接耦合放大器

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A direct-coupled amplifier or DC amplifier is a type of amplifier in which the output of one stage of the amplifier is coupled to the input of the next stage in such a way as to permit signals with zero frequency, also referred to as direct current, to pass from input to output. This is an application of the more general direct coupling.

It was invented by Harold J Paz and Francis P. Keiper Jr. in 1955. It displaced the triode vacuum tube amplifier designed by Lee de Forest. Almost all vacuum tube circuit designs are now replaced with direct coupled transistor circuit design.

It is the first transistor amplifier design that did not include coupling capacitors. The direct-coupled amplifier allowed analog circuits to be built smaller with the elimination of coupling capacitors and removed the lower frequency limitation that is dependent on capacitors.

Current

The common use of the term "DC amplifier" does not mean "direct current amplifier", as this type can be used for both direct current and alternating current signals. The frequency response of the direct coupled amplifier is similar to low pass filter and hence it is also known as "Low-Pass Amplifier".

The amplification of DC (zero frequency) is possible only by this amplifier, hence it later becomes the building block for differential amplifier and operational amplifier. Furthermore, monolithic integrated circuit technology does not allow the fabrication of large coupling capacitors.

Drift

Direct-coupled amplifiers constructed in the conventional form of single-ended amplifiers connected in cascade suffer from drift of the output voltage with time and temperature. In many high-gain applications it is necessary to provide offset adjustments to deal with drift. The drift problem can be overcome by using differential amplifiers.

Application

Direct-coupled amplifiers are used in voltage regulators, servo drives and other instrumentation amplifiers. It also forms a building block for differential amplifiers and operational amplifiers.

See also

Capacitive coupling

Text derived from https://en.wikipedia.org/w/index.php?oldid=1321241478 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot direct-coupled-amplifier-512711-b625baf07ed28dcf · hash b625baf07ed28dcfe5b903a8ddf64e13e9fdbae203c773ab4797e7563ab66007 · captured 2025-11-09 · not yet sealed in the ledger · verify the chain · version history

Cite this page as: encyclopegia.org, “direct-coupled amplifier”, snapshot direct-coupled-amplifier-512711-b625baf07ed28dcf. https://encyclopegia.org/a/direct-coupled-amplifier

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.