---
title: Direct laser interference patterning
slug: direct-laser-interference-patterning
qid: 
snapshot: enwiki-001317250230
content_hash: 
license: CC BY-SA 4.0
source: https://en.wikipedia.org/w/index.php?oldid=1317250230
tags: [10639794, 20338945, 20383301, 32816569, 63697623]
---

# Direct laser interference patterning

> [!note] Provenance
> Snapshot `enwiki-001317250230` · content root `…`
> Derived from <https://en.wikipedia.org/w/index.php?oldid=1317250230> · Licensed CC BY-SA 4.0

In materials science, Direct Laser Interference Patterning (DLIP) is a laser-based technology that uses the physical principle of interference of high-intensity, coherent laser pulses to produce functional periodic microstructures. To achieve interference, the beam is divided by a beam splitter, specialized prisms, or other elements. The beams are then overlapped on amaterial surface to form an interference pattern. If the power of the laser beam is sufficiently high, material removal can occur at the interference maxima through processes such as remelting, evaporation and ablation, while the material at the interference minima remains mostly intact. In this way, a large variety of periodic patterns can be created on the surface of the material. Depending on the lasers used, DLIP can be applied to almost any material and can change the properties of surfaces in many technological areas with regard to electrical and optical properties, tribology (friction and wear), light absorption and wettability.

In materials science, Direct Laser Interference Patterning (DLIP) is a laser-based technology that uses the physical principle of interference of high-intensity, coherent laser pulses to produce functional periodic microstructures. To achieve interference, the beam is divided by a beam splitter, specialized prisms, or other elements. The beams are then overlapped on amaterial surface to form an interference pattern. If the power of the laser beam is sufficiently high, material removal can occur at the interference maxima through processes such as remelting, evaporation and ablation, while the material at the interference minima remains mostly intact. In this way, a large variety of periodic patterns can be created on the surface of the material. Depending on the lasers used, DLIP can be applied to almost any material and can change the properties of surfaces in many technological areas with regard to electrical and optical properties, tribology (friction and wear), light absorption and wettability.
