DiscT@2

DiscT@2 (read as "disc tattoo") is a method of writing text and graphics to the data side of a CD-R or DVD disc first introduced by Yamaha in 2002.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

DiscT@2 (read as "disc tattoo") is a method of writing text and graphics to the data side of a CD-R or DVD disc first introduced by Yamaha in 2002. While often compared with the later LabelFlash and LightScribe technologies, which also offered users consumer-grade computerized disc labeling, DiscT@2 is different in that it required no proprietary media and wrote the graphics to the data side of the disc.

Reimplementation

Open-source software accomplishing the same goal with wide support for drives and CD-R media, CDImage, was developed in 2022. Since generic drives don't measure absolute angle of the disc's rotation, the technique relies on calibrating parameters of the spiral by burning test discs from a single CD-R batch, whose pregroove with synchronizing wobble was pressed from the same master, or using parameters of known discs shared by the developer or user community.

See also

Labelflash LightScribe LabelTag

Official Yamaha DiscT@2 Page (archived)

Text derived from https://en.wikipedia.org/w/index.php?oldid=1364400557 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

10 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.