Lesson plan

Disk swapping

Disk swapping refers to the practice of inserting and removing, or swapping, floppy disks in a floppy disk drive-based computer system. In the early days of personal computers, before hard drives became commonplace, most fully outfitted computer systems had two floppy drives (addressed as A: and B: on MS-DOS, and also on CP/M other systems had different conventions). Disk drives were expensive, however, and having two was seen as a luxury by many computer users who had to make do with a single drive. The purpose of two floppy drives was so that the disk containing the application program could remain in the drive while the data disk containing the user's files could be accessed in the second drive. Without a second drive, in order to use a function of the program not loaded into memory, the user would have to first remove the data disk, then insert the program disk. When the user then wanted to save their file, the reverse operation would have to be performed. On some less-than-user-friendly systems, this could result in data loss when, for example, files were accidentally saved onto the program disk. Disk swapping was an infamous feature of early Macintosh 128K systems, which were extremely RAM-starved.

Back to article

Article summary

Disk swapping refers to the practice of inserting and removing, or swapping, floppy disks in a floppy disk drive-based computer system. In the early days of personal computers, before hard drives became commonplace, most fully outfitted computer systems had two floppy drives (addressed as A: and B: on MS-DOS, and also on CP/M other systems had different conventions). Disk drives were expensive, however, and having two was seen as a luxury by many computer users who had to make do with a single drive. The purpose of two floppy drives was so that the disk containing the application program could remain in the drive while the data disk containing the user's files could be accessed in the second drive. Without a second drive, in order to use a function of the program not loaded into memory, the user would have to first remove the data disk, then insert the program disk. When the user then wanted to save their file, the reverse operation would have to be performed. On some less-than-user-friendly systems, this could result in data loss when, for example, files were accidentally saved onto the program disk. Disk swapping was an infamous feature of early Macintosh 128K systems, which were extremely RAM-starved.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.