Dispersion (optics)
, material dispersion (a wavelength-dependent refractive index) causes different colors to refract at different angles, splitting white light into a spectrum. seen through an Amici prism Dispersion is the phenomenon in which the phase…
≈ 10 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
, material dispersion (a wavelength-dependent refractive index) causes different colors to refract at different angles, splitting white light into a spectrum. seen through an Amici prism Dispersion is the phenomenon in which the phase velocity of a wave depends on its frequency. Sometimes the term chromatic dispersion is used to refer to optics specifically, as opposed to wave propagation in general.
A medium having this common property may be termed a dispersive medium. Although the term is used in the field of optics to describe light and other electromagnetic waves, dispersion in the same sense can apply to any sort of wave motion such as acoustic dispersion in the case of sound and seismic waves, and in gravity waves (ocean waves).
Within optics, dispersion is a property of telecommunication signals along transmission lines (such as microwaves in coaxial cable) or the pulses of light in optical fiber. In optics, one important and familiar consequence of dispersion is the change in the angle of refraction of different colors of light, as seen in the spectrum produced by a dispersive prism and in chromatic aberration of lenses.…
, material dispersion (a wavelength-dependent refractive index) causes different colors to refract at different angles, splitting white light into a spectrum. seen through an Amici prism Dispersion is the phenomenon in which the phase velocity of a wave depends on its frequency. Sometimes the term chromatic dispersion is used to refer to optics specifically, as opposed to wave propagation in general.
A medium having this common property may be termed a dispersive medium. Although the term is used in the field of optics to describe light and other electromagnetic waves, dispersion in the same sense can apply to any sort of wave motion such as acoustic dispersion in the case of sound and seismic waves, and in gravity waves (ocean waves).
Within optics, dispersion is a property of telecommunication signals along transmission lines (such as microwaves in coaxial cable) or the pulses of light in optical fiber. In optics, one important and familiar consequence of dispersion is the change in the angle of refraction of different colors of light, as seen in the spectrum produced by a dispersive prism and in chromatic aberration of lenses.
Design of compound achromatic lenses, in which chromatic aberration is largely cancelled, uses a quantification of a glass's dispersion given by its Abbe number V, where lower Abbe numbers correspond to greater dispersion over the visible spectrum. In some applications such as telecommunications, the absolute phase of a wave is often not important but only the propagation of wave packets or "pulses"; in that case one is interested only in variations of group velocity with frequency, so-called group-velocity dispersion.
All common transmission media also vary in attenuation (normalized to transmission length) as a function of frequency, leading to attenuation distortion; this is not dispersion, although sometimes reflections at closely spaced impedance boundaries (e.g. crimped segments in a cable) can produce signal distortion which further aggravates inconsistent transit time as observed across signal bandwidth. v = \frac{c}{n}, where c is the speed of light in vacuum, and n is the refractive index of the medium. In general, the refractive index is some function of the frequency f of the light, thus n = n(f), or alternatively, with respect to the wave's wavelength n = n(λ).
The wavelength dependence of a material's refractive index is usually quantified by its Abbe number or its coefficients in an empirical formula such as the Cauchy or Sellmeier equations. Because of the Kramers–Kronig relations, the wavelength dependence of the real part of the refractive index is related to the material absorption, described by the imaginary part of the refractive index (also called the extinction coefficient).
In particular, for non-magnetic materials (μ = μ 0 ), the susceptibility χ that appears in the Kramers–Kronig relations is the electric susceptibility χ e = n 2 − 1. The most commonly seen consequence of dispersion in optics is the separation of white light into a color spectrum by a prism.
From Snell's law it can be seen that the angle of refraction of light in a prism depends on the refractive index of the prism material. Since that refractive index varies with wavelength, it follows that the angle that the light is refracted by will also vary with wavelength, causing an angular separation of the colors known as angular dispersion.
For visible light, the refraction index n of most transparent materials (e.g., air, glasses) decreases with increasing wavelength λ: 1 or generally, \frac{dn}{d \lambda} In this case, the medium is said to have normal dispersion. However, if the index increases with increasing wavelength (which is typically the case in the ultraviolet ), the medium is said to have anomalous dispersion.
At the interface of such a material with air or vacuum (index of ~1), Snell's law predicts that light incident at an angle θ to the normal will be refracted at an angle arcsin( ). Thus, in the case of normal dispersion, blue light, with a higher refractive index, will be bent more strongly than red light, resulting in the well-known rainbow pattern.
Beyond simply describing a change in the phase velocity over wavelength, a more serious consequence of dispersion in many applications is termed group-velocity dispersion (GVD). While phase velocity v is defined as v = c/n, this describes only one frequency component.
When different frequency components are combined, as when considering a signal or a pulse, one is often more interested in the group velocity, which describes the speed at which a pulse or information superimposed on a wave (modulation) propagates. In the accompanying animation, it can be seen that the wave itself (orange-brown) travels at a phase velocity much faster than the speed of the envelope (black), which corresponds to the group velocity.
This pulse might be a communications signal, for instance, and its information only travels at the group velocity rate, even though it consists of wavefronts advancing at a faster rate (the phase velocity). It is possible to calculate the group velocity from the refractive-index curve n(ω) or more directly from the wavenumber k = ωn/c, where ω is the radian frequency ω = 2πf. Whereas one expression for the phase velocity is v p = ω/k, the group velocity can be expressed using the derivative: v g = dω/dk.
Or in terms of the phase velocity v p , v_\text{g} = \frac{v_\text{p}}{1 - \dfrac{\omega}{v_\text{p}} \dfrac{dv_\text{p}}{d\omega}}. When dispersion is present, not only the group velocity is not equal to the phase velocity, but generally it itself varies with wavelength.
This is known as group-velocity dispersion and causes a short pulse of light to be broadened, as the different-frequency components within the pulse travel at different velocities. Group-velocity dispersion is quantified as the derivative of the reciprocal of the group velocity with respect to angular frequency, which results in group-velocity dispersion = d 2 k/dω 2 .
If a light pulse is propagated through a material with positive group-velocity dispersion, then the shorter-wavelength components travel slower than the longer-wavelength components. The pulse therefore becomes positively chirped, or up-chirped, increasing in frequency with time.
On the other hand, if a pulse travels through a material with negative group-velocity dispersion, shorter-wavelength components travel faster than the longer ones, and the pulse becomes negatively chirped, or down-chirped, decreasing in frequency with time. An everyday example of a negatively chirped signal in the acoustic domain is that of an approaching train hitting deformities on a welded track.
The sound caused by the train itself is impulsive and travels much faster in the metal tracks than in air, so that the train can be heard well before it arrives. However, from afar it is not heard as causing impulses, but leads to a distinctive descending chirp, amidst reverberation caused by the complexity of the vibrational modes of the track.
Group-velocity dispersion can be heard in that the volume of the sounds stays audible for a surprisingly long time, up to several seconds. D = -\frac{2\pi c}{\lambda^2} \frac{d^2 \beta}{d\omega^2} = \frac{2\pi c}{v_g^2 \lambda^2} \frac{dv_g}{d\omega}, where λ = 2 c/ω is the vacuum wavelength, and v g = dω/dβ is the group velocity.
This formula generalizes the one in the previous section for homogeneous media and includes both waveguide dispersion and material dispersion. The reason for defining the dispersion in this way is that |D| is the (asymptotic) temporal pulse spreading Δt per unit bandwidth Δλ per unit distance travelled, commonly reported in ps/(nm⋅km) for optical fibers.
In the case of multi-mode optical fibers, so-called modal dispersion will also lead to pulse broadening. Even in single-mode fibers, pulse broadening can occur as a result of polarization mode dispersion (since there are still two polarization modes). These are not examples of chromatic dispersion, as they are not dependent on the wavelength or bandwidth of the pulses propagated.
D_i(t, r) = E_i(t, r) + \int_0^\infty \int f_{ik}(\tau; r, r') E_k(t - \tau, r') \,dV'\,d\tau, where the kernel f_{ik} is dielectric response (susceptibility); its indices make it in general a tensor to account for the anisotropy of the medium. Spatial dispersion is negligible in most macroscopic cases, where the scale of variation of E_k(t - \tau, r') is much larger than atomic dimensions, because the dielectric kernel dies out at macroscopic distances.
Nevertheless, it can result in non-negligible macroscopic effects, particularly in conducting media such as metals, electrolytes and plasmas. Spatial dispersion also plays role in optical activity and Doppler broadening, as well as in the theory of metamaterials. t = k_\text{DM} \cdot \left(\frac{\text{DM}}{\nu^2}\right), where the dispersion constant k DM is given by k_\text{DM} = \frac{e^2}{2 \pi m_\text{e} c} \approx 4.149~\text{GHz}^2\,\text{pc}^{-1}\,\text{cm}^3\,\text{ms}, and the dispersion measure (DM) is the column density of free electrons (total electron content) i.e. the number density of electrons n e integrated along the path traveled by the photon from the pulsar to the Earth and is given by \text{DM} = \int_0^d n_e\,dl with units of parsecs per cubic centimetre (1 pc/cm 3 = 30.857 m −2 ).
Typically for astronomical observations, this delay cannot be measured directly, since the emission time is unknown. What can be measured is the difference in arrival times at two different frequencies.
The delay Δt between a high-frequency hi and a low-frequency lo component of a pulse will be \Delta t = k_\text{DM} \cdot \text{DM} \cdot \left( \frac{1}{\nu_\text{lo}^2} - \frac{1}{\nu_\text{hi}^2} \right). Rewriting the above equation in terms of Δt allows one to determine the DM by measuring pulse arrival times at multiple frequencies.
This in turn can be used to study the interstellar medium, as well as allow observations of pulsars at different frequencies to be combined.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1343132132 under CC BY-SA 4.0; modifications have been made.