Lesson plan
Distributed control system
A distributed control system (DCS) is a control system used to control industrial processes in which control functions are distributed among multiple autonomous controllers like Programmable Logic Controller (PLC) connected by a communication network. These controllers are typically located near the process equipment or within plant control areas, while operator interfaces, supervisory control, alarm management, and process monitoring are commonly provided through centralised operator stations. This architecture contrasts with centralised control systems, in which control functions are performed primarily by a central controller or computer system. By distributing control functions across multiple controllers, a DCS can improve system availability, scalability, and fault isolation, while reducing the amount of dedicated point-to-point wiring required for large industrial processes. DCS first emerged in large, high value, safety critical process industries, and were attractive because the DCS manufacturer would supply both the local control level and central supervisory equipment as an integrated package, thus reducing design integration risk.…
Article summary
A distributed control system (DCS) is a control system used to control industrial processes in which control functions are distributed among multiple autonomous controllers like Programmable Logic Controller (PLC) connected by a communication network. These controllers are typically located near the process equipment or within plant control areas, while operator interfaces, supervisory control, alarm management, and process monitoring are commonly provided through centralised operator stations. This architecture contrasts with centralised control systems, in which control functions are performed primarily by a central controller or computer system. By distributing control functions across multiple controllers, a DCS can improve system availability, scalability, and fault isolation, while reducing the amount of dedicated point-to-point wiring required for large industrial processes. DCS first emerged in large, high value, safety critical process industries, and were attractive because the DCS manufacturer would supply both the local control level and central supervisory equipment as an integrated package, thus reducing design integration risk.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.