Double-slit experiment

In modern physics, the double-slit experiment demonstrates that light and matter can exhibit behavior associated with both classical particles and classical waves.

Uses your system voice; voice and rate in settings.

≈ 7 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In modern physics, the double-slit experiment demonstrates that light and matter can exhibit behavior associated with both classical particles and classical waves. This type of experiment was first described by Thomas Young in 1801 when making his case for the wave behavior of visible light.

In 1927, Davisson and Germer and, independently, George Paget Thomson and his research student Alexander Reid demonstrated that electrons show the same behavior, which was later extended to atoms and molecules. The experiment belongs to a general class of "double path" experiments, in which two diffracted waves reconverge, creating an interference pattern.

Another version is the Mach–Zehnder interferometer, which splits the beam with a beam splitter. In the basic version of this experiment, a coherent light source, such as a laser beam, illuminates a plate pierced by two parallel slits, and the light passing through the slits is observed on a screen behind the plate.

The wave nature of light causes the light waves passing through the two slits to interfere, producing bright and dark bands on the screen – a result that would not be expected if light consisted of classical particles. However, the light is always found to be absorbed at the screen at discrete points, as individual particles (not waves); the interference pattern appears via the varying density of these particle hits on the screen.

Furthermore, versions of the experiment that include detectors at the slits find that each detected photon passes through one slit (as would a classical particle), and not through both slits (as would a wave). However, such experiments demonstrate that particles do not form the double-slit interference pattern if one detects which slit they pass through; the pattern instead becomes the sum of two single-slit interference patterns.

These results demonstrate the principle of wave–particle duality. Other atomic-scale entities, such as electrons, are found to exhibit the same behavior when fired towards a double slit. Additionally, the detection of individual discrete impacts is observed to be inherently probabilistic, which is inexplicable using classical mechanics.

The experiment can be done with entities much larger than electrons and photons, although it becomes more difficult as size increases. Among the larger objects which the double-slit experiment has been performed were molecules that each comprised 2000 atoms (whose total mass was 25,000 daltons) and nanoparticles composed of 5000-10000 sodium atoms.

The double-slit experiment (and its variations) has become a classic for its clarity in expressing the central puzzles of quantum mechanics. Richard Feynman called it "a phenomenon which is impossible […] to explain in any classical way, and which has in it the heart of quantum mechanics.

In reality, it contains the only mystery [of quantum mechanics]." d \sin \theta \approx d \theta where d is the distance between the two slits. When the two waves are in phase, i.e. the path difference is equal to an integral number of wavelengths, the summed amplitude, and therefore the summed intensity is maximum, and when they are in anti-phase, i.e. the path difference is equal to half a wavelength, one and a half wavelengths, etc., then the two waves cancel and the summed intensity is zero.

This effect is known as interference. The interference fringe maxima occur at angles d \theta_n = n \lambda,~ n=0,1,2,\ldots where λ is the wavelength of the light.

The angular spacing of the fringes, , is given by \theta_f \approx \lambda / d The spacing of the fringes at a distance from the slits is given by ~w=z \theta_f = z \lambda /d For example, if two slits are separated by 0.5 mm ( ), and are illuminated with a 0.6 μm wavelength laser ( ), then at a distance of 1 m ( ), the spacing of the fringes will be 1.2 mm. If the width of the slits is appreciable compared to the wavelength, the Fraunhofer diffraction equation is needed to determine the intensity of the diffracted light as follows: \begin{align} I(\theta) &\propto \cos^2 \left [{\frac {\pi d \sin \theta}{\lambda}}\right]~\mathrm{sinc}^2 \left [ \frac {\pi b \sin \theta}{\lambda} \right] \end{align} where the sinc function is defined as sinc(x) = sin(x)/x for x ≠ 0, and sinc(0) = 1.

This is illustrated in the figure above, where the first pattern is the diffraction pattern of a single slit, given by the function in this equation, and the second figure shows the combined intensity of the light diffracted from the two slits, where the function represents the fine structure, and the coarser structure represents diffraction by the individual slits as described by the function. Similar calculations for the near field can be made by applying the Fresnel diffraction equation, which implies that as the plane of observation gets closer to the plane in which the slits are located, the diffraction patterns associated with each slit decrease in size, so that the area in which interference occurs is reduced, and may vanish altogether when there is no overlap in the two diffracted patterns.

A_{\text{path}}(x,y,z,t) = e^{i S(x,y,z,t)} All these contributions are then added together, and the magnitude of the final result is squared, to get the probability distribution for the position of a particle: p(x,y,z,t) \propto \left\vert \int_{\text{all paths}} e^{i S(x,y,z,t)} \right\vert ^2 As is always the case when calculating probability, the results must then be normalized by imposing: \iiint_{\text{all space}}p(x,y,z,t)\,dV = 1 The probability distribution of the outcome is the normalized square of the norm of the superposition, over all paths from the point of origin to the final point, of waves propagating proportionally to the action along each path. The differences in the cumulative action along the different paths (and thus the relative phases of the contributions) produces the interference pattern observed by the double-slit experiment.

Feynman stressed that his formulation is merely a mathematical description, not an attempt to describe a real process that we can measure. Double slit interference lecture by Walter Lewin of MIT Movie showing single electron events build up to form an interference pattern in double-slit experiments.

Several versions with and without narration (File size = 3.6 to 10.4 MB) (Movie Length = 1m 8s) Freeview video 'Electron Waves Unveil the Microcosmos' A Royal Institution Discourse by Akira Tonomura provided by the Vega Science Trust Hitachi website that provides background on Tonomura video and link to the video Through the Wormhole: Yves Couder . Explains Wave/Particle Duality via Silicon Droplets

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378908535 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001378908535 · captured 2026-10-06 · ledger · version history

Cite this page as: encyclopegia.org, “Double-slit experiment”, snapshot enwiki-001378908535. https://encyclopegia.org/a/double-slit-experiment

Sources cited in this revision

35 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.