Lesson plan

Drilling fluid

down the drilling string on a drilling rig In geotechnical engineering, drilling fluid, also known as drilling mud or drilling slurry, is used to aid the drilling of boreholes into the earth. Used while drilling oil and natural gas wells and on exploration drilling rigs, drilling fluids are also used for much simpler boreholes, such as water wells. The two main categories of drilling fluids are water-based muds (WBs), which can be dispersed and non-dispersed, and non-aqueous muds, usually called oil-based muds (OBs). Along with their formatives, these are used along with appropriate polymer and clay additives for drilling various oil and gas formations. Gaseous drilling fluids, typically utilizing air or natural gas, sometimes with the addition of foaming agents, can be used when downhole conditions permit. The main functions of liquid drilling fluids are to exert hydrostatic pressure to prevent formation fluids from entering into the well bore, and carrying out drill cuttings as well as suspending the drill cuttings while drilling is paused such as when the drilling assembly is brought in and out of the hole. The drilling fluid also keeps the drill bit cool and clears out cuttings beneath it during drilling. The drilling fluid used for a particular job is selected to avoid formation damage and to limit corrosion.

Back to article

Article summary

down the drilling string on a drilling rig In geotechnical engineering, drilling fluid, also known as drilling mud or drilling slurry, is used to aid the drilling of boreholes into the earth. Used while drilling oil and natural gas wells and on exploration drilling rigs, drilling fluids are also used for much simpler boreholes, such as water wells. The two main categories of drilling fluids are water-based muds (WBs), which can be dispersed and non-dispersed, and non-aqueous muds, usually called oil-based muds (OBs). Along with their formatives, these are used along with appropriate polymer and clay additives for drilling various oil and gas formations. Gaseous drilling fluids, typically utilizing air or natural gas, sometimes with the addition of foaming agents, can be used when downhole conditions permit. The main functions of liquid drilling fluids are to exert hydrostatic pressure to prevent formation fluids from entering into the well bore, and carrying out drill cuttings as well as suspending the drill cuttings while drilling is paused such as when the drilling assembly is brought in and out of the hole. The drilling fluid also keeps the drill bit cool and clears out cuttings beneath it during drilling. The drilling fluid used for a particular job is selected to avoid formation damage and to limit corrosion.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.