Drip coffee
≈ 6 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Drip coffee is made by pouring hot water onto ground coffee beans, allowing it to brew while seeping through. There are several methods for doing this, including using a filter. Terms used for the resulting coffee often reflect the method used, such as drip-brewed coffee, or, somewhat inaccurately, filtered coffee in general. Manually brewed drip coffee is typically referred to as pour-over coffee. Water seeps through the ground coffee, absorbing its constituent chemical compounds, and then passes through a filter. The used coffee grounds are retained in the filter, while the brewed coffee is collected in a vessel such as a carafe or pot.
Drip coffee is made by pouring hot water onto ground coffee beans, allowing it to brew while seeping through. There are several methods for doing this, including using a filter. Terms used for the resulting coffee often reflect the method used, such as drip-brewed coffee, or, somewhat inaccurately, filtered coffee in general. Manually brewed drip coffee is typically referred to as pour-over coffee. Water seeps through the ground coffee, absorbing its constituent chemical compounds, and then passes through a filter. The used coffee grounds are retained in the filter, while the brewed coffee is collected in a vessel such as a carafe or pot.
Methods
There are a number of methods and pieces of equipment for making drip-brewed coffee.
Manual pour-over coffee preparation
Pour-over methods are popular ways of making specialty drip coffee. The method involves pouring water over a bed of coffee (sometimes also called cake) in a filter-lined conical, trapezoid, or cylindrical chamber typically consisting of a filter and a suitable filter holder. The filtering can be with paper, cloth, plastic, ceramics, or metal. The quality of the resulting coffee is extremely dependent on the technique of the user, with pour-over brewing being a popular method used in the World Brewers Cup. The pour-over coffee preparation method typically starts by pouring a small amount of hot water over the paper filter to remove the paper taste then the coffee grounds are added and the surface is flattened. A small amount of hot water is poured over the coffee grounds and it is allowed to sit for about 30 to 45 seconds before continuing the pouring. This pre-wetting, called blooming, will cause carbon dioxide to be released in bubbles or foam from the coffee grounds and helps to improve the taste. The rest of the measured water is poured slowly in circular motion over the coffee grounds for slow extraction. Adding water too fast will result in a more watery consistency while a slow pour can yield a richer taste. Unlike a french press method where coffee grounds brew in water, the pour over method allows for a more controlled aroma extraction. Agitation methods like swirling can increase extraction. There are several manual drip-brewing devices on the market, offering more control over brewing parameters than automatic machines, and which incorporate stopper valves and other innovations that offer greater control over steeping time and the proportion of coffee to water. There also exist small, portable, single-serving drip brew makers that only hold the filter and rest on top of a mug or cup, making them a popular option for backcountry campers and hikers. Hot water is poured in and drips directly into the cup. Different filter shapes and sizes exist, most notable the (paper) coffee filter systems introduced by Melitta (1908, 1932, 1936, 1965), Chemex (1941), and Hario (2004 ).
Manual drip-coffee makers
Bavarian coffee pot
In 1812, Benjamin Thompson (Count Rumford), had published an essay of his on improvements to an Italian coffee bean roaster, along with improvements to the Bavarian Coffee pot.
Karlsbad-style coffee makers
A variant of the category of French drip coffee pots is the group of "Bohemian" coffee pots including the original Karlsbad coffee makers, historically produced by several mostly Bohemian porcelain manufacturers since 1878 up into the first half of the 20th century, and variants produced by Siegmund Paul Meyer (SPM) / Walküre since 1910, Friesland (FPM). In contrast to French drip coffee pots which feature round holes, they all use a special double-layered cross-slit strainer made from through-glazed porcelain. Before World War I, they were very popular in the Viennese coffee house culture. The special kind of drip coffee they produce is called a ("Karlsbad coffee").
Electric drip-coffee makers
One of the first electrical drip coffee makers was the German Wigomat, patented in 1954. In the early 1970s electrical drip coffee makers became more common, causing a decline in manual drip coffee preparation methods until the 2010s, and the near-extinction of coffee percolators. Among the early electrical drip coffee machines was a machine designed by two former Westinghouse engineers and sold under the brand Mr. Coffee in the early 1970s. It normally works by admitting water from a cold-water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminium), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. The carafe, usually made of glass, rests on a warming plate that keeps the brewed coffee warm. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10- to 12-cup drip coffeemaker, using a more powerful thermostatically controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminium construction of most heating chambers to a metal with superior heat transfer qualities, such as copper. Throughout the latter part of the 20th century, a number of inventors patented various coffeemaker designs using an automated form of the drip brew method. Subsequent designs have featured changes in heating elements, spray head, and brew-basket design, as well as the addition of timers and clocks for automatic-start, water filtration, filter and carafe design, drip stop, and even built-in coffee grinding mechanisms.
Notes
Text derived from https://en.wikipedia.org/w/index.php?oldid=1369769453 under CC BY-SA 4.0; modifications have been made.