Lesson plan
Driven to refusal
This is an engineering term for describing how far to drive piles. It is also used in surveying when driving metal posts and monuments that are to be used as bench marks (ie. the elevation of which will be established to a high degree of accuracy). When a very high degree of stability is required the post will be inside an oil filled outer casing to protect it against movement of the surrounding ground usually because of the frost. A rod or pile has been "driven to refusal" when five more blows of an adequate hammer will not budge the rod or pile.
Article summary
This is an engineering term for describing how far to drive piles. It is also used in surveying when driving metal posts and monuments that are to be used as bench marks (ie. the elevation of which will be established to a high degree of accuracy). When a very high degree of stability is required the post will be inside an oil filled outer casing to protect it against movement of the surrounding ground usually because of the frost. A rod or pile has been "driven to refusal" when five more blows of an adequate hammer will not budge the rod or pile.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.