Drude model
≈ 19 min read
Names in other languages
- ΕλληνικάΜοντέλο του Ντρουντ
- Françaismodèle de Drude
- PortuguêsModelo de Drude
- DeutschDrude-Theorie
- Русскийтеория Друде
- EnglishDrude model
- 한국어드루드 모형
- 中文德鲁德模型
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Drude model or the Drude–Lorentz model of electrical conduction in metals was proposed in 1900 by Paul Drude, and refined by Hendrik Lorentz in 1905. The Drude model attempts to explain conduction in terms of the scattering of electrons (the carriers of electricity) by the relatively immobile ions in the metal that act like obstructions to the flow of electrons. The model is an application of kinetic theory. It assumes that when electrons in a solid are exposed to the electric field, they behave much like a pinball machine. The sea of constantly jittering electrons bouncing and re-bouncing off heavier, relatively immobile positive ions produce a net collective motion in the direction opposite to the applied electric field. In modern terms this is reflected in the valence electron model where the sea of electrons is composed of the valence electrons only, and not the full set of electrons available in the solid, and the scattering centers are the inner shells of tightly bound electrons to the nucleus. The scattering centers had a positive charge equivalent to the valence number of the atoms. This similarity added to some computation errors in the Drude paper, ended up providing a reasonable qualitative theory of solids capable of making good predictions in certain cases and giving completely wrong results in others.…
The Drude model or the Drude–Lorentz model of electrical conduction in metals was proposed in 1900 by Paul Drude, and refined by Hendrik Lorentz in 1905. The Drude model attempts to explain conduction in terms of the scattering of electrons (the carriers of electricity) by the relatively immobile ions in the metal that act like obstructions to the flow of electrons. The model is an application of kinetic theory. It assumes that when electrons in a solid are exposed to the electric field, they behave much like a pinball machine. The sea of constantly jittering electrons bouncing and re-bouncing off heavier, relatively immobile positive ions produce a net collective motion in the direction opposite to the applied electric field. In modern terms this is reflected in the valence electron model where the sea of electrons is composed of the valence electrons only, and not the full set of electrons available in the solid, and the scattering centers are the inner shells of tightly bound electrons to the nucleus. The scattering centers had a positive charge equivalent to the valence number of the atoms. This similarity added to some computation errors in the Drude paper, ended up providing a reasonable qualitative theory of solids capable of making good predictions in certain cases and giving completely wrong results in others. Whenever people tried to give more substance and detail to the nature of the scattering centers, and the mechanics of scattering, and the meaning of the length of scattering, all these attempts ended in failures. The scattering lengths computed in the Drude model, are of the order of 10 to 100 interatomic distances, and also these could not be given proper microscopic explanations. The model gives better predictions for metals, especially in regards to conductivity, and sometimes is called Drude theory of metals. This is because metals have essentially a better approximation to the free electron model, i.e. metals do not have complex band structures, electrons behave essentially as free particles and where, in the case of metals, the effective number of de-localized electrons is essentially the same as the valence number. The two most significant results of the Drude model are an electronic equation of motion, \frac{d}{dt}\langle\mathbf{p}(t)\rangle = q\left(\mathbf{E}+\frac{\langle\mathbf{p}(t)\rangle}{m} \times\mathbf{B} \right) - \frac{\langle\mathbf{p}(t)\rangle}{\tau}, and a linear relationship between current density and electric field , \mathbf{J} = \frac{n q^2 \tau}{m} \, \mathbf{E}. Here is the time, ⟨p⟩ is the average momentum per electron and , and are respectively the electron charge, number density, mass, and mean free time between ionic collisions. The latter expression is particularly important because it explains in semi-quantitative terms why Ohm's law, one of the most ubiquitous relationships in all of electromagnetism, should hold. n = \frac{N_\text{A} Z \rho_\text{m}}{A}, where Z is the effective number of de-localized electrons per ion, for which Drude used the valence number, A is the atomic mass per mole, \rho_\text{m} is the mass density (mass per unit volume) of the "ions", and N is the Avogadro constant. Considering the average volume available per electron as a sphere: \frac{V}{N} = \frac{1}{n} = \frac{4}{3} \pi r_{\rm s}^3 . The quantity r_\text{s} is a parameter that describes the electron density and is often of the order of 2 or 3 times the Bohr radius, for alkali metals it ranges from 3 to 6 and some metal compounds it can go up to 10. The densities are of the order of 1000 times of a typical classical gas. The core assumptions made in the Drude model are the following: Drude applied the kinetic theory of a dilute gas, despite the high densities, therefore ignoring electron–electron and electron–ion interactions aside from collisions. The Drude model considers the metal to be formed of a collection of positively charged ions from which a number of "free electrons" were detached. These may be thought to be the valence electrons of the atoms that have become delocalized due to the electric field of the other atoms. The Drude model neglects long-range interaction between the electron and the ions or between the electrons; this is called the independent electron approximation. The electrons move in straight lines between one collision and another; this is called free electron approximation. The only interaction of a free electron with its environment was treated as being collisions with the impenetrable ions core. The average time between subsequent collisions of such an electron is , with a memoryless Poisson distribution. The nature of the collision partner of the electron does not matter for the calculations and conclusions of the Drude model. After a collision event, the distribution of the velocity and direction of an electron is determined by only the local temperature and is independent of the velocity of the electron before the collision event. The electron is considered to be immediately at equilibrium with the local temperature after a collision. Removing or improving upon each of these assumptions gives more refined models, that can more accurately describe different solids: Improving the hypothesis of the Maxwell–Boltzmann statistics with the Fermi–Dirac statistics leads to the Drude–Sommerfeld model. Improving the hypothesis of the Maxwell–Boltzmann statistics with the Bose–Einstein statistics leads to considerations about the specific heat of integer spin atoms and to the Bose–Einstein condensate. A valence band electron in a semiconductor is still essentially a free electron in a delimited energy range (i.e. only a "rare" high energy collision that implies a change of band would behave differently); the independent electron approximation is essentially still valid (i.e. no electron–electron scattering), where instead the hypothesis about the localization of the scattering events is dropped (in layman terms the electron is and scatters all over the place). \Delta\langle\mathbf{p}\rangle= q \mathbf{E} \tau. During its last collision, this electron will have been just as likely to have bounced forward as backward, so all prior contributions to the electron's momentum may be ignored, resulting in the expression \langle\mathbf{p}\rangle = q \mathbf{E} \tau. Substituting the relations \begin{align} \langle\mathbf{p}\rangle &= m \langle\mathbf{v}\rangle, \\ \mathbf{J} &= n q \langle\mathbf{v}\rangle, \end{align} results in the formulation of Ohm's law mentioned above: \mathbf{J} = \frac{n q^2 \tau}{m} \mathbf{E}. \mathbf{p}(t_0+dt) = \left( 1 - \frac{dt}{\tau} \right) \left[\mathbf{p}(t_0) + \mathbf{f}(t) dt + O(dt^2)\right] + \frac{dt}{\tau} \left(\mathbf{g}(t_0) + \mathbf{f}(t) dt + O(dt^2)\right) where \mathbf{f}(t) can be interpreted as generic force (e.g. Lorentz force) on the carrier or more specifically on the electron. \mathbf{g}(t_0) is the momentum of the carrier with random direction after the collision (i.e. with a momentum \langle\mathbf{g}(t_0)\rangle = 0 ) and with absolute kinetic energy \frac{\langle|\mathbf{g}(t_0)|\rangle^2}{2m} = \frac{3}{2} KT. On average, a fraction of \textstyle 1-\frac{dt}{\tau} of the electrons will not have experienced another collision, the other fraction that had the collision on average will come out in a random direction and will contribute to the total momentum to only a factor \textstyle \frac{dt}{\tau}\mathbf{f}(t)dt which is of second order. With a bit of algebra and dropping terms of order dt^2 , this results in the generic differential equation \frac{d}{dt}\mathbf{p}(t) = \mathbf{f}(t) - \frac{\mathbf{p}(t)}{\tau} The second term is actually an extra drag force or damping term due to the Drude effects. \langle\mathbf{p}(t_0+dt)\rangle=\left( 1 - \frac{dt}{\tau} \right) \left(\langle\mathbf{p}(t_0)\rangle + q\mathbf{E} \, dt\right), and then \frac{d}{dt}\langle\mathbf{p}(t)\rangle = q\mathbf{E} - \frac{\langle\mathbf{p}(t)\rangle}{\tau}, where denotes average momentum and the charge of the electrons. This, which is an inhomogeneous differential equation, may be solved to obtain the general solution of \langle\mathbf{p}(t)\rangle = q \tau \mathbf{E}(1-e^{-t/\tau}) + \langle\mathbf{p}(0)\rangle e^{-t/\tau} for . The steady state solution, , is then \langle\mathbf{p}\rangle = q \tau \mathbf{E}. As above, average momentum may be related to average velocity and this in turn may be related to current density, \begin{align} \langle\mathbf{p}\rangle &= m \langle\mathbf{v}\rangle, \\ \mathbf{J} &= n q \langle\mathbf{v}\rangle, \end{align} and the material can be shown to satisfy Ohm's law \mathbf{J} = \sigma_0 \mathbf{E} with a DC-conductivity : \sigma_0 = \frac{n q^2 \tau}{m} \sigma(\omega) = \frac{\sigma_0}{1 - i\omega\tau}= \frac{\sigma_0}{1 + \omega^2\tau^2}+ i\omega\tau\frac{\sigma_0}{1 + \omega^2\tau^2}. Here it is assumed that: \begin{align} E(t) &= \Re{\left(E_0 e^{-i\omega t}\right)}; \\ J(t) &= \Re\left(\sigma(\omega) E_0 e^{-i\omega t}\right). \end{align} In engineering, is generally replaced by (or ) in all equations, which reflects the phase difference with respect to origin, rather than delay at the observation point traveling in time. {{math proof|title=Proof using the equation of motion |proof= Given \begin{align} \mathbf{p}(t) &= \Re{\left(\mathbf{p}(\omega) e^{-i\omega t}\right)} \\ \mathbf{E}(t) &= \Re{\left(\mathbf{E}(\omega) e^{-i\omega t}\right)} \end{align} And the equation of motion above \frac{d}{dt}\mathbf{p}(t) = -e\mathbf{E} - \frac{\mathbf{p}(t)}{\tau} substituting -i\omega\mathbf{p}(\omega) = -e\mathbf{E}(\omega) - \frac{\mathbf{p}(\omega)}{\tau} Given \begin{align} \mathbf{j} &= - n e \frac{\mathbf{p}}{m} \\ \mathbf{j}(t) &= \Re{\left(\mathbf{j}(\omega) e^{-i\omega t}\right)} \\ \mathbf{j}(\omega) &= - n e \frac{\mathbf{p}(\omega)}{m}=\frac{(n e^2/m)\mathbf{E}(\omega)}{1/\tau -i \omega} \end{align} defining the complex conductivity from: \mathbf{j}(\omega) = \sigma(\omega)\mathbf{E}(\omega) We have: \sigma(\omega) = \frac{\sigma_0}{1-i\omega\tau};\sigma_0=\frac{ne^2\tau}{m} }} The imaginary part indicates that the current lags behind the electrical field. This happens because the electrons need roughly a time to accelerate in response to a change in the electrical field. Here the Drude model is applied to electrons; it can be applied both to electrons and holes; i.e., positive charge carriers in semiconductors. The curves for are shown in the graph. If a sinusoidally varying electric field with frequency \omega is applied to the solid, the negatively charged electrons behave as a plasma that tends to move a distance apart from the positively charged background. As a result, the sample is polarized and there will be an excess charge at the opposite surfaces of the sample. The dielectric constant of the sample is expressed as \varepsilon_r = \frac {D}{\varepsilon_0 E} = 1 + \frac {P}{\varepsilon_0 E} where D is the electric displacement and P is the polarization density. The polarization density is written as P(t) = \Re{\left(P_0e^{i\omega t}\right)} and the polarization density with electron density is P = - n e x After a little algebra the relation between polarization density and electric field can be expressed as P = - \frac{ne^2}{m\omega^2} E The frequency dependent dielectric function of the solid is \varepsilon_r(\omega) = 1 - \frac {n e^2}{\varepsilon_0m \omega^2} {{math proof|title=Proof using Maxwell's equations |proof= Given the approximations for the \sigma(\omega) included above we assumed no electromagnetic field: this is always smaller by a factor v/c given the additional Lorentz term - \frac {e \mathbf{p}}{mc} \times \mathbf{B} in the equation of motion we assumed spatially uniform field: this is true if the field does not oscillate considerably across a few mean free paths of electrons. This is typically not the case: the mean free path is of the order of Angstroms corresponding to wavelengths typical of X rays. The following are Maxwell's equations without sources (which are treated separately in the scope of plasma oscillations), in Gaussian units: \begin{align} \nabla \cdot \mathbf{E} &= 0; & \nabla \cdot \mathbf{B} &= 0; \\ \nabla \times \mathbf{E} &= - \frac{1}{c}\frac{\partial \mathbf{B}}{\partial t}; & \nabla \times \mathbf{B} &= \frac{4\pi}{c}\mathbf{j} + \frac{1}{c}\frac{\partial \mathbf{E}}{\partial t}. \end{align} Then \nabla \times \nabla \times \mathbf{E} = - \nabla^2 \mathbf{E} = \frac{i \omega}{c} \nabla \times \mathbf{B} = \frac{i \omega}{c} \left( \frac{4\pi \sigma}{c} \mathbf{E} - \frac{i \omega}{c} \mathbf{E} \right) or -\nabla^2 \mathbf{E} = \frac{\omega^2}{c^2} \left( 1 + \frac {4\pi i \sigma}{\omega}\right) \mathbf{E} which is an electromagnetic wave equation for a continuous homogeneous medium with dielectric constant \varepsilon(\omega) in the Helmholtz form - \nabla^2 \mathbf{E} = \frac{\omega^2}{c^2} \varepsilon(\omega) \mathbf{E} where the refractive index is n(\omega) = \sqrt{\varepsilon(\omega)} and the phase velocity is v_\text{p} = \frac{c}{n(\omega)} therefore the complex dielectric constant is \varepsilon(\omega) = \left( 1 + \frac {4\pi i \sigma}{\omega}\right) which in the case \omega\tau \gg 1 can be approximated to: \varepsilon(\omega) = \left( 1 - \frac{\omega_{\rm p}^2}{\omega^2} \right); \omega_{\rm p}^2 = \frac {4\pi n e^2}{m} \text{(Gaussian units)}. In SI units the 4 \pi in the numerator is replaced by \varepsilon_0 in the denominator and the dielectric constant is written as \varepsilon_r . }} At a resonance frequency \omega_{\rm p} , called the plasma frequency, the dielectric function changes sign from negative to positive and real part of the dielectric function drops to zero. \omega_{\rm p} = \sqrt{\frac{n e^2}{\varepsilon_0 m}} The plasma frequency represents a plasma oscillation resonance or plasmon. The plasma frequency can be employed as a direct measure of the square root of the density of valence electrons in a solid. Observed values are in reasonable agreement with this theoretical prediction for a large number of materials. Below the plasma frequency, the dielectric function is negative and the field cannot penetrate the sample. Light with angular frequency below the plasma frequency will be totally reflected. Above the plasma frequency the light waves can penetrate the sample, a typical example is alkaline metals that becomes transparent in the range of ultraviolet radiation. \frac {\kappa}{\sigma T} = \frac{3}{2}\left(\frac{k_{\rm B}}{e}\right)^2 = 1.11 \times 10^{-8} \, \mathrm{W{\cdot}\Omega/K^2} Experimental values are typically in the range of 2-3 \times 10^{-8} ~ \mathrm{W{\cdot}\Omega/K^2} for metals at temperatures between 0 and 100 degrees Celsius. {{math proof|title=Derivation and Drude's errors |proof= Solids can conduct heat through the motion of electrons, atoms, and ions. Conductors have a large density of free electrons whereas insulators do not; ions may be present in either. Given the good electrical and thermal conductivity in metals and the poor electrical and thermal conductivity in insulators, a natural starting point to estimate the thermal conductivity is to calculate the contribution of the conduction electrons. The thermal current density is the flux per unit time of thermal energy across a unit area perpendicular to the flow. It is proportional to the temperature gradient. \mathbf{j}_q = - \kappa \nabla T where \kappa is the thermal conductivity. In a one-dimensional wire, the energy of electrons depends on the local temperature \varepsilon[T(x)] If we imagine a temperature gradient in which the temperature decreases in the positive x-direction, the average electron velocity is zero (but not the average speed). The electrons arriving at location from the higher-energy side will arrive with energies \varepsilon[T(x-v\tau)] , while those from the lower-energy side will arrive with energies \varepsilon[T(x+v\tau)] . Here, v is the average speed of electrons and \tau is the average time since the last collision. The net flux of thermal energy at location is the difference between what passes from left to right and from right to left: \mathbf{j}_q = \frac{1}{2} n v \big( \varepsilon[T(x-v\tau)] - \varepsilon[T(x+v\tau)] \big) The factor of accounts for the fact that electrons are equally likely to be moving in either direction. Only half contribute to the flux at . When the mean free path \ell = v \tau is small, the quantity \big( \varepsilon[T(x-v\tau)] - \varepsilon[T(x+v\tau)] \big) / 2 v \tau can be approximated by a derivative with respect to . This gives \mathbf{j}_q = n v^2 \tau \frac {d \varepsilon}{dT} \cdot \left(-\frac{dT}{dx} \right) Since the electron moves in the x , y , and z directions, the mean square velocity in the x direction is \langle v_x^2 \rangle = \tfrac{1}{3} \langle v^2 \rangle . We also have n \frac {d\varepsilon}{dT}=\frac{N}{V}\frac {d\varepsilon}{dT} = \frac{1}{V} \frac {dE}{dT} = c_v , where c_v is the specific heat capacity of the material. Putting all of this together, the thermal energy current density is \mathbf{j}_q = -\frac{1}{3} v^2 \tau c_v \nabla T This determines the thermal conductivity: \kappa = \frac{1}{3} v^2 \tau c_v (This derivation ignores the temperature-dependence, and hence the position-dependence, of the speed . This will not introduce a significant error unless the temperature changes rapidly over a distance comparable to the mean free path.) Dividing the thermal conductivity \kappa by the electrical conductivity \sigma = \frac{n e^2 \tau} {m} eliminates the scattering time \tau and gives \frac{\kappa}{\sigma} = \frac{c_v m v^2}{3n e^2} At this point of the calculation, Drude made two assumptions now known to be errors. First, he used the classical result for the specific heat capacity of the conduction electrons: c_v= \tfrac{3}{2}n k_{\rm B} . This overestimates the electronic contribution to the specific heat capacity by a factor of roughly 100. Second, Drude used the classical mean square velocity for electrons, \tfrac{1}{2}mv^2=\tfrac{3}{2}k_{\rm B} T . This underestimates the energy of the electrons by a factor of roughly 100. The cancellation of these two errors results in a good approximation to the conductivity of metals. In addition to these two estimates, Drude also made a statistical error and overestimated the mean time between collisions by a factor of 2. This confluence of errors gave a value for the Lorenz number that was remarkably close to experimental values. The correct value of the Lorenz number as estimated from the Drude model is \frac {\kappa}{\sigma T} = \frac{3}{2}\left(\frac{k_{\rm B}}{e}\right)^2 = 1.11 \times 10^{-8} \, \text{W}\Omega/\text{K}^2. }} \mathbf{E} = Q \nabla T and is called thermopower. The estimates by Drude are a factor of 100 low given the direct dependency with the specific heat. Q = - \frac{c_v}{3ne} = - \frac{k_{\rm B}}{2e} = 0.43 \times 10^{-4} \mathrm{~V/K} where the typical thermopowers at room temperature are 100 times smaller, of the order of microvolts. {{math proof|title=Proof together with the Drude errors |proof= From the simple one dimensional model v_Q=\frac{1}{2}[v(x-v\tau)-v(x+v\tau)]=-v \tau \frac {dv}{dx}= - \tau \frac {d}{dx}\left(\frac{v^2}{2}\right) Expanding to 3 degrees of freedom \langle v_x^2 \rangle = \frac{1}{3} \langle v^2 \rangle \mathbf{v_Q}=- \frac {\tau}{6} \frac {dv^2}{dT} (\nabla T) The mean velocity due to the Electric field (given the equation of motion above at equilibrium) \mathbf{v_E}=- \frac {e \mathbf{E} \tau}{m} To have a total current null \mathbf{v_E} + \mathbf{v_Q} = 0 we have Q = - \frac{1}{3e}\frac {d}{dT}\left(\frac{mv^2}{2}\right) = - \frac{c_v}{3ne} And as usual in the Drude case c_v=\frac{3}{2}nk_{\rm B} Q = - \frac{k_{\rm B}}{2e} = 0.43 \times 10^{-4}~\mathrm{V/K} where the typical thermopowers at room temperature are 100 times smaller of the order of microvolts. }}
Text derived from https://en.wikipedia.org/w/index.php?oldid=1376246803 under CC BY-SA 4.0; modifications have been made.