Lesson plan
Ducking
In audio engineering, ducking is an audio effect commonly used in radio and pop music, especially dance music. In ducking, the level of one audio signal is reduced by the presence of another signal. In radio this can typically be achieved by lowering (ducking) the volume of a secondary audio track when the primary track starts, and lifting the volume again when the primary track is finished. A typical use of this effect in a daily radio production routine is for creating a voice-over: a foreign language original sound is dubbed (and ducked) by a professional speaker reading the translation. Ducking becomes active as soon as the translation starts. In music, the ducking effect is applied in more sophisticated ways where a signal's volume is delicately lowered by another signal's presence. Ducking here works through the use of a "side chain" gate. In other words, one track is made quieter (the ducked track) whenever another (the ducking track) gets louder. This may be done with a gate with its ducking function engaged or by a dedicated ducker. A typical application is to achieve an impression similar to the "pumping" effect. The difference between ducking and side-chain pumping is that in ducking the attenuation is by a specific range while side-chain compression creates variable attenuation.…
Article summary
In audio engineering, ducking is an audio effect commonly used in radio and pop music, especially dance music. In ducking, the level of one audio signal is reduced by the presence of another signal. In radio this can typically be achieved by lowering (ducking) the volume of a secondary audio track when the primary track starts, and lifting the volume again when the primary track is finished. A typical use of this effect in a daily radio production routine is for creating a voice-over: a foreign language original sound is dubbed (and ducked) by a professional speaker reading the translation. Ducking becomes active as soon as the translation starts. In music, the ducking effect is applied in more sophisticated ways where a signal's volume is delicately lowered by another signal's presence. Ducking here works through the use of a "side chain" gate. In other words, one track is made quieter (the ducked track) whenever another (the ducking track) gets louder. This may be done with a gate with its ducking function engaged or by a dedicated ducker. A typical application is to achieve an impression similar to the "pumping" effect. The difference between ducking and side-chain pumping is that in ducking the attenuation is by a specific range while side-chain compression creates variable attenuation.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.