Duramax I6 engine
The Duramax I6 engine is a diesel engine available in select models of General Motors light-duty trucks and SUVs.
≈ 2 min read
Duramax I6 engine. encyclopegia.org, snapshot enwiki-001356746638. /a/duramax-i6-engine
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Duramax I6 engine is a diesel engine available in select models of General Motors light-duty trucks and SUVs. Applications include the Chevrolet Silverado/GMC Sierra 1500, Chevrolet Suburban/GMC Yukon XL, Chevrolet Tahoe/GMC Yukon, and Cadillac Escalade (both short wheelbase and ESV). The engine was developed together with Opel, who are manufacturing three- and four-cylinder versions displacing 1.5 and 2.0 liters, using the same engine architecture.
Engine details
Displacement: 3.0L Configuration: Inline 6 Horsepower: 277-305 hp @ 3750 rpm Torque: 460-495 ft-lb (624-671 nm) @ 1500 rpm RPO code: LM2 (until 2024), LZ0 (2023-present) Intercooler: liquid-to-air Block: Aluminum Head: Aluminum Crankshaft: Forged Steel Rods: Forged Pistons: Hypereutetic cast aluminum alloy - LZ0 upgraded to steel pistons Cylinder liners: Iron The engine's timing components are located at the rear of the engine, and feature timing chains to drive the camshafts and high pressure fuel pump, and a wet belt to drive the oil pump. This arrangement makes inspection and replacement very difficult and expensive.
Most of the development and engineering work for the LM2 Duramax, as well as primary calibration took place in Turin, Italy. The engine is being produced at Flint Engine Operations. A test by Car and Driver showed 40 MPG is possible when hypermiling.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1356746638 under CC BY-SA 4.0; modifications have been made.