Dying gasp

A dying gasp is a message (or signal) sent by the customer premises equipment (CPE) to equipment managed by an internet service provider (ISP) to indicate that the CPE has lost power.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A dying gasp is a message (or signal) sent by the customer premises equipment (CPE) to equipment managed by an internet service provider (ISP) to indicate that the CPE has lost power. Also known as last gasp.

DSL

A DSL device will send a dying gasp signal to the digital subscriber line access multiplexer (DSLAM) when a power outage occurs. A DSL interface with dying gasp must derive power for a brief period from another source so that the message can be sent without external power.

The dying gasp message will end the session and a new session will be able to be made as soon as power returns and the modem retrains. Dying gasp is referenced in section 7.1.2.5.3 of ITU-T Recommendation G.991.2 (12/2003) as the Power Status bit.

Fiber

When an optical network terminal loses power it will send a dying gasp signal to the optical line terminal which will end the session.

See also

Passive optical network

ITU-T Recommendation G.991.2: Single-pair high-speed digital subscriber line (SHDSL) transceivers

Text derived from https://en.wikipedia.org/w/index.php?oldid=1236825447 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.