Lesson plan
Dynamic random-access memory
photograph of the Micron Technology MT4C1024 DRAM integrated circuit (1994). It has a capacity of 1 megabit equivalent to 2 20 bits or 128 KiB. of the NeXTcube computer, 1990, with 64 MiB main memory DRAM (top left) and 256 KiB of VRAM (lower edge, right of middle) Dynamic random-access memory (dynamic RAM or DRAM) is a type of random-access semiconductor memory that stores each bit of data in a memory cell. A DRAM memory cell usually consists of a microscopic capacitor and a transistor, both typically based on metal–oxide–semiconductor (MOS) technology. While most DRAM memory cell designs use a capacitor and transistor, some only use two transistors. In the designs where a capacitor is used, the capacitor can either be charged or discharged; these two states are taken to represent the two values of a bit, conventionally called 0 and 1. The electric charge on the capacitors gradually leaks away; without intervention, the data on the capacitor would soon be lost. To prevent this, DRAM requires an external memory refresh circuit which periodically rewrites the data in the capacitors, restoring them to their original charge. This refresh process is the defining characteristic of dynamic random-access memory, in contrast to static random-access memory (SRAM) which does not require data to be refreshed.…
Article summary
photograph of the Micron Technology MT4C1024 DRAM integrated circuit (1994). It has a capacity of 1 megabit equivalent to 2 20 bits or 128 KiB. of the NeXTcube computer, 1990, with 64 MiB main memory DRAM (top left) and 256 KiB of VRAM (lower edge, right of middle) Dynamic random-access memory (dynamic RAM or DRAM) is a type of random-access semiconductor memory that stores each bit of data in a memory cell. A DRAM memory cell usually consists of a microscopic capacitor and a transistor, both typically based on metal–oxide–semiconductor (MOS) technology. While most DRAM memory cell designs use a capacitor and transistor, some only use two transistors. In the designs where a capacitor is used, the capacitor can either be charged or discharged; these two states are taken to represent the two values of a bit, conventionally called 0 and 1. The electric charge on the capacitors gradually leaks away; without intervention, the data on the capacitor would soon be lost. To prevent this, DRAM requires an external memory refresh circuit which periodically rewrites the data in the capacitors, restoring them to their original charge. This refresh process is the defining characteristic of dynamic random-access memory, in contrast to static random-access memory (SRAM) which does not require data to be refreshed.…
Key claims
- date of formation: 1969 — source: Wikipedia, revision 1376305698, retrieved 2026-10-20 · confidence 0.95
- publication date: 1998 — source: Wikipedia, revision 1376305698, retrieved 2026-10-20 · confidence 0.95
- release date: 1998 — source: Wikipedia, revision 1376305698, retrieved 2026-10-20 · confidence 0.95
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- The record states that the date of formation is "1969". What evidence would count against this claim?
- The record states that the publication date is "1998". What evidence would count against this claim?
- The record states that the release date is "1998". What evidence would count against this claim?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
- Wikipedia, “Dynamic random-access memory”, revision 1376305698, retrieved 2026-10-20 https://en.wikipedia.org/w/index.php?oldid=1376305698
Key claims and bibliography are generated from the same tracked claims and sources as the article page.