Dynamic range compression
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
162; Dbx 165; Empirical Labs Distressor; Smart Research C2; Chandler Limited TG1; Daking FET (91579); and Altec 436c. Dynamic range compression (DRC) or simply compression, is an audio signal processing operation that reduces the volume of loud sounds or amplifies quiet sounds, thus reducing or compressing an audio signal's dynamic range. Compression is commonly used in sound recording and reproduction, broadcasting, live sound reinforcement and some instrument amplifiers.
A dedicated electronic hardware unit or audio software that applies compression is called a compressor. In the 2000s, compressors became available as software plugins that run in digital audio workstation software. In recorded and live music, compression parameters may be adjusted to change the way they affect sounds. Compression and limiting are identical in process but different in degree and perceived effect. A limiter is a compressor with a high ratio and, generally, a short attack time.
Compression is used to improve performance and clarity in public address systems, as an effect and to improve consistency in mixing and mastering. It is used on voice to reduce sibilance and in broadcasting and advertising specifically to make an audio program stand out. It is an integral technology in some noise reduction systems.
162; Dbx 165; Empirical Labs Distressor; Smart Research C2; Chandler Limited TG1; Daking FET (91579); and Altec 436c. Dynamic range compression (DRC) or simply compression, is an audio signal processing operation that reduces the volume of loud sounds or amplifies quiet sounds, thus reducing or compressing an audio signal's dynamic range. Compression is commonly used in sound recording and reproduction, broadcasting, live sound reinforcement and some instrument amplifiers.
A dedicated electronic hardware unit or audio software that applies compression is called a compressor. In the 2000s, compressors became available as software plugins that run in digital audio workstation software. In recorded and live music, compression parameters may be adjusted to change the way they affect sounds. Compression and limiting are identical in process but different in degree and perceived effect. A limiter is a compressor with a high ratio and, generally, a short attack time.
Compression is used to improve performance and clarity in public address systems, as an effect and to improve consistency in mixing and mastering. It is used on voice to reduce sibilance and in broadcasting and advertising specifically to make an audio program stand out. It is an integral technology in some noise reduction systems. digital mixer |alt=|upright The amount of gain reduction is determined by ratio: a ratio of 4:1 means that if input level is 4 dB over the threshold, the output signal level is reduced to 1 dB over the threshold.
The gain and output level has been reduced by 3 dB. Another way of stating this is that any input signal level over the threshold will, in this case, be output at a level which is only 25% as much over the threshold as its input level was. The highest ratio of \infty :1 is often known as limiting, and effectively denotes that any signal above the threshold is brought down to the threshold level once the attack time has expired.
Parallel compression
Inserting the compressor in a parallel signal path is known as parallel compression. It is a form of upward compression that facilitates dynamic control without significant audible side effects so long as the ratio is relatively low and the compressor's sound is relatively neutral. On the other hand, a high compression ratio with significant audible artifacts can be chosen in one of the two parallel signal paths. This is used by some concert mixers and recording engineers as an artistic effect called New York compression or Motown compression. Combining a linear signal with a compressor and then reducing the output gain of the compression chain results in low-level detail enhancement without any peak reduction; The compressor significantly adds to the combined gain at low levels only.
Serial compression
Serial compression is a technique used in sound recording and mixing. Serial compression is achieved by using two fairly different compressors in a signal chain. One compressor generally stabilizes the dynamic range while the other aggressively compresses stronger peaks. This is the normal internal signal routing in common combination devices marketed as compressor-limiters, where an RMS compressor (for general gain control) is followed by a fast peak-sensing limiter (for overload protection). Done properly, even heavy serial compression can sound natural in a way not possible with a single compressor. It is most often used to even out erratic vocals and guitars. Information on Compression in Home Recording Interactive audio compression visualizer
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377121547 under CC BY-SA 4.0; modifications have been made.