Dynamic recrystallization

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Dynamic recrystallization (DRX) is a type of recrystallization process, found within the fields of metallurgy and geology. In dynamic recrystallization, as opposed to static recrystallization, the nucleation and growth of new grains occur during deformation rather than afterwards as part of a separate heat treatment. The reduction of grain size increases the risk of grain boundary sliding at elevated temperatures, while also decreasing dislocation mobility within the material.

The new grains are less strained, causing a decrease in the hardening of a material. Dynamic recrystallization allows for new grain sizes and orientation, which can prevent crack propagation. Rather than strain causing the material to fracture, strain can initiate the growth of a new grain, consuming atoms from neighboring pre-existing grains. After dynamic recrystallization, the ductility of the material increases.

In a stress–strain curve, the onset of dynamic recrystallization can be recognized by a distinct peak in the flow stress in hot working data, due to the softening effect of recrystallization. However, not all materials display well-defined peaks when tested under hot working conditions. The onset of DRX can also be detected from inflection point in plots of the strain hardening rate against stress.…

Dynamic recrystallization (DRX) is a type of recrystallization process, found within the fields of metallurgy and geology. In dynamic recrystallization, as opposed to static recrystallization, the nucleation and growth of new grains occur during deformation rather than afterwards as part of a separate heat treatment. The reduction of grain size increases the risk of grain boundary sliding at elevated temperatures, while also decreasing dislocation mobility within the material.

The new grains are less strained, causing a decrease in the hardening of a material. Dynamic recrystallization allows for new grain sizes and orientation, which can prevent crack propagation. Rather than strain causing the material to fracture, strain can initiate the growth of a new grain, consuming atoms from neighboring pre-existing grains. After dynamic recrystallization, the ductility of the material increases.

In a stress–strain curve, the onset of dynamic recrystallization can be recognized by a distinct peak in the flow stress in hot working data, due to the softening effect of recrystallization. However, not all materials display well-defined peaks when tested under hot working conditions. The onset of DRX can also be detected from inflection point in plots of the strain hardening rate against stress.

It has been shown that this technique can be used to establish the occurrence of DRX when this cannot be determined unambiguously from the shape of the flow curve. If stress oscillations appear before reaching the steady state, then several recrystallization and grain growth cycles occur and the stress behavior is said to be of the cyclic or multiple peak type. The particular stress behavior before reaching the steady state depends on the initial grain size, temperature, and strain rate.

DRX can occur in various forms, including: Geometric dynamic recrystallization Discontinuous dynamic recrystallization Continuous dynamic recrystallization Dynamic recrystallization is dependent on the rate of dislocation creation and movement. It is also dependent on the recovery rate (the rate at which dislocations annihilate). The interplay between work hardening and dynamic recovery determines grain structure. It also determines the susceptibility of grains to various types of dynamic recrystallization.

Regardless of the mechanism, for dynamic recrystallization to occur, the material must have experienced a critical deformation. The final grain size increases with increased stress. To achieve very fine-grained structures the stresses have to be high. Some authors have used the term 'postdynamic' or 'metadynamic' to describe recrystallization that occurs during the cooling phase of a hot-working process or between successive passes.

This emphasises the fact that the recrystallization is directly linked to the process in question, while acknowledging that there is no concurrent deformation.

Mathematical Formulas

Based on the method developed by Poliak and Jonas, a few models are developed in order to describe the critical strain for the onset of DRX as a function of the peak strain of the stress–strain curve. The models are derived for the systems with single peak, i.e. for the materials with medium to low stacking fault energy values.

The models can be found in the following papers: Determination of flow stress and the critical strain for the onset of dynamic recrystallization using a sine function Determination of flow stress and the critical strain for the onset of dynamic recrystallization using a hyperbolic tangent function Determination of critical strain for initiation of dynamic recrystallization Characteristic points of stress–strain curve at high temperature The DRX behavior for systems with multiple peaks (and single peak as well) can be modeled considering the interaction of multiple grains during deformation.

I. e. the ensemble model describes the transition between single and multi peak behavior based on the initial grain size. It can also describe the effect of transient changes of the strain rate on the shape of the flow curve. The model can be found in the following paper: A new unified approach for modeling recrystallization during hot rolling of steel

Literature

A one-parmenter approach to determining the critical conditions for the initiation of dynamic recrystallization, onset of DRX Flow Curve Analysis of 17–4 PH Stainless Steel under Hot Compression Test, comprehensive study of DRX Constitutive relations to model the hot flow of commercial purity copper, chapter 6, doctoral thesis by V.G. García, UPC (2004) A review of dynamic recrystallization phenomena in metallic materials, Latest review paper on DRX A Cellular Automaton Model of Dynamic Recrystallization: Introduction & Source Code, Software simulating DRX by CA: Introduction, Video of software run

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1374266593 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001374266593 · captured 1789073528.0 · version history

Cite this page as: encyclopegia.org, “Dynamic recrystallization”, snapshot enwiki-001374266593. https://encyclopegia.org/a/dynamic-recrystallization

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.