Dynamitron

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Dynamitron is an electrostatic particle accelerator invented by Marshal Cleland in 1956 at Washington University in St. Louis and manufactured by Electron Equipment Experts LLC. It is similar to a Cockcroft-Walton accelerator, using a series capacitor-diode ladder network to generate a high DC voltage on an electrode, which accelerates particles through an evacuated beam tube between the electrode and a target at ground potential.

However instead of being powered at one end as in the Cockcroft-Walton, the capacitive ladder is charged in parallel electrostatically by a high frequency oscillating voltage applied between two long half-cylindrical electrodes on either side of the ladder column, which induce voltage in semicircular corona rings attached to each end of the diode rectifier tubes. in combination with an inductor this structure forms a resonant tank circuit for the oscillator providing the voltage, at a frequency of 100 kHz.

How it works

The alternating voltage across the diodes pumps charge in one direction up the series stack of diodes to the high voltage electrode as in the Cockcroft-Walton circuit. The advantage of this design is that it can produce higher beam currents than the Cockcroft-Walton design, up to hundreds of milliamperes, and the high frequency reduces the ripple on the accelerating voltage.…

The Dynamitron is an electrostatic particle accelerator invented by Marshal Cleland in 1956 at Washington University in St. Louis and manufactured by Electron Equipment Experts LLC. It is similar to a Cockcroft-Walton accelerator, using a series capacitor-diode ladder network to generate a high DC voltage on an electrode, which accelerates particles through an evacuated beam tube between the electrode and a target at ground potential.

However instead of being powered at one end as in the Cockcroft-Walton, the capacitive ladder is charged in parallel electrostatically by a high frequency oscillating voltage applied between two long half-cylindrical electrodes on either side of the ladder column, which induce voltage in semicircular corona rings attached to each end of the diode rectifier tubes. in combination with an inductor this structure forms a resonant tank circuit for the oscillator providing the voltage, at a frequency of 100 kHz.

The alternating voltage across the diodes pumps charge in one direction up the series stack of diodes to the high voltage electrode as in the Cockcroft-Walton circuit. The advantage of this design is that it can produce higher beam currents than the Cockcroft-Walton design, up to hundreds of milliamperes, and the high frequency reduces the ripple on the accelerating voltage. The accelerator stack is inside a tank of pressurized sulfur hexafluoride gas for insulation.

Impact

It can accelerate either electrons or positive ions, and tandem versions have been built. The Dynamitron is made in several models with output energies from 0.5 to 5 MeV and beam power from 50 to 200 kW. Its main use is in industrial irradiation applications; the most common are polymer crosslinking for production of heat shrink tubing, and shrink wrap plastic film for food packaging, sterilization, and curing of plastic foam and tire components. Around 200 units are in operation, primarily in the US.

Evidence and sources

A number have been installed in university research settings including the University of Birmingham in the UK and Tohoku University in Japan A modern research application for Dynamitrons is as a high intensity neutron source. They are particularly suited for neutron production via the Lithium (p,n) reaction with potential applications in neutron imaging, activation analysis and Boron Neutron Capture Therapy.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1324324006 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001324324006 · captured 1764195978.0 · version history

Cite this page as: encyclopegia.org, “Dynamitron”, snapshot enwiki-001324324006. https://encyclopegia.org/a/dynamitron

Sources cited in this revision

8 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.