Lesson plan

Dynamo

A dynamo is an electrical generator that creates direct current using a commutator, and uses self-powering electromagnets for the stator field rather than permanent magnets. Dynamos are self-starting by using residual magnetic field left in the iron cores of the electromagnets (i.e. field coils). If a dynamo were never run before, it was usual to use a separate battery to excite or flash the field of the electromagnets to enable self-starting. Dynamos were the first practical electrical generators capable of delivering power for industry, and the foundation upon which many other later electric-power conversion devices were based, including the electric motor, the alternating-current alternator, and the rotary converter. Today, the simpler and more reliable alternator dominates large scale power generation, for efficiency, reliability and cost reasons. A dynamo has the disadvantages of a mechanical commutator. Also, converting alternating to direct current using rectifiers (such as vacuum tubes or more recently via solid state technology) is effective and usually economical.

Back to article

Article summary

A dynamo is an electrical generator that creates direct current using a commutator, and uses self-powering electromagnets for the stator field rather than permanent magnets. Dynamos are self-starting by using residual magnetic field left in the iron cores of the electromagnets (i.e. field coils). If a dynamo were never run before, it was usual to use a separate battery to excite or flash the field of the electromagnets to enable self-starting. Dynamos were the first practical electrical generators capable of delivering power for industry, and the foundation upon which many other later electric-power conversion devices were based, including the electric motor, the alternating-current alternator, and the rotary converter. Today, the simpler and more reliable alternator dominates large scale power generation, for efficiency, reliability and cost reasons. A dynamo has the disadvantages of a mechanical commutator. Also, converting alternating to direct current using rectifiers (such as vacuum tubes or more recently via solid state technology) is effective and usually economical.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.