Dynomak

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Dynomak is a spheromak fusion reactor concept developed by the University of Washington using U.S. Department of Energy funding. A dynomak is a spheromak that is started and maintained by magnetic flux injection. It is formed when an alternating current is used to induce a magnetic flux into plasma. An electric alternating current transformer uses the same induction process to create a secondary current. Once formed, the plasma inside a dynomak relaxes into its lowest energy state, while conserving overall flux. This is termed a Taylor state and inside the machine what is formed is a plasma structure named a spheromak. A dynomak is a kind of spheromak that is started and driven by externally induced magnetic fields.

Dynomak is a spheromak fusion reactor concept developed by the University of Washington using U.S. Department of Energy funding. A dynomak is a spheromak that is started and maintained by magnetic flux injection. It is formed when an alternating current is used to induce a magnetic flux into plasma. An electric alternating current transformer uses the same induction process to create a secondary current. Once formed, the plasma inside a dynomak relaxes into its lowest energy state, while conserving overall flux. This is termed a Taylor state and inside the machine what is formed is a plasma structure named a spheromak. A dynomak is a kind of spheromak that is started and driven by externally induced magnetic fields.

Design

Dynomak incorporates an ITER-developed cryogenic pumping system. Spheromak use an oblate spheroid instead of a tokamak configuration, with no central core, or large, complex superconducting magnets as in many tokamaks, e.g., ITER. The magnetic fields are produced by putting electric fields into the center of the plasma using superconducting tapes wrapped around the vessel, such that the plasma contains itself. A dynomak is smaller simpler and cheaper to build than a tokamak, such as ITER, while producing more power. The fusion reaction is self-sustaining as excess heat is drawn off by a molten salt blanket to power a steam turbine. The prototype was about one tenth the scale of a commercial project, and can sustain plasma efficiently. Higher output would require larger scale, and higher plasma temperature.

See also

Spheromak Field-reversed configuration, a similar concept Spherical tokamak, essentially a spheromak formed around a central conductor–magnet Taylor state John Bryan Taylor List of nuclear fusion companies

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1354248393 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

6 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.