Earthquake cycle
earthquake cycle.
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
earthquake cycle. The over-riding plate bends to accumulate stress during the interseismic period and rebounds back to its previous position to release stress. The earthquake cycle refers to the phenomenon that earthquakes repeatedly occur on the same fault as the result of continual stress accumulation and periodic stress release.
Earthquake cycles can occur on a variety of faults including subduction zones and continental faults. Depending on the size of the earthquake, an earthquake cycle can last decades, centuries, or longer. The Parkfield portion of the San Andreas fault is a well-known example where similarly located M6.0 earthquakes have been instrumentally recorded every 30–40 years.
Spring-slider model
The simple spring-slider coupling model helps explain the recurrence of earthquake cycles. The premise is that a stationary block in contact with a rough surface is dragged by a spring that is pulled at a constant velocity. This process causes stress to continuously accumulate on the spring.
Once the drag force exceeds the static friction limit f(0), the block will slide along the ground surface. Assuming that the kinematic friction is smaller than the static friction, the block's initial movement is unstable, which is equivalent to a fault rupture. Once the block comes to rest at a new location, stress begins to accumulate again.
Coupled systems of spring-slider models have successfully reproduced the Gutenberg–Richter law.
Rate-and-state friction law
The rate-and-state friction law is widely applied in dynamic fault models and critically influences a fault's possible slip features. The rate-and-state friction law assumes that the friction coefficient is a function of both the sliding velocity (the rate) and the system conditions (the state).
In the rate-and-state friction law, the friction coefficient increases when the slip velocity abruptly increases and then gradually decreases to reach a new steady value. The rate-and-state friction relation is influenced by a set of factors including thermal activation, the real area of contact (at the atomic scale), and molecular bonding effects.
Recent developments
Dynamic fault modeling helps explain the mechanisms driving earthquake cycles. Based on the rate-and-state friction law, the transfer from slow-slip events to rapid rupture earthquakes related to geometric and elastic parameters of the fault zone has been discovered.
A computationally faster quasi-dynamic model that simplifies stress transfers allows new models taking plastic effects into consideration. However, comparison of quasi-dynamic models with fully dynamic models of the same systems shows that the modeling approach has significant impacts on the proposed earthquake-cycle slip features.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377097784 under CC BY-SA 4.0; modifications have been made.