---
title: Echo (computing)
slug: echo-computing
qid: 
snapshot: enwiki-001374164045
content_hash: 
license: CC BY-SA 4.0
source: https://en.wikipedia.org/w/index.php?oldid=1374164045
tags: [131300176, 20548265, 23603337, 26220375, 73150761, 9567816]
---

# Echo (computing)

> [!note] Provenance
> Snapshot `enwiki-001374164045` · content root `…`
> Derived from <https://en.wikipedia.org/w/index.php?oldid=1374164045> · Licensed CC BY-SA 4.0

In telecommunications, echo is the local display of data, either initially as it is locally sourced and sent, or finally as a copy of it is received back from a remote destination. Local echo is where the local sending equipment displays the outgoing sent data. Remote echo is where the display is a return copy of data as received remotely. Both are used together in a computed form of error detection to ensure that data received at the remote destination of a telecommunication are the same as data sent from the local source (a/k/a echoplex, echo check, or loop check). When (two) modems communicate in echoplex mode the remote modem echoes whatever it receives from the local modem.

In telecommunications, echo is the local display of data, either initially as it is locally sourced and sent, or finally as a copy of it is received back from a remote destination. Local echo is where the local sending equipment displays the outgoing sent data. Remote echo is where the display is a return copy of data as received remotely. Both are used together in a computed form of error detection to ensure that data received at the remote destination of a telecommunication are the same as data sent from the local source (a/k/a echoplex, echo check, or loop check). When (two) modems communicate in echoplex mode the remote modem echoes whatever it receives from the local modem. In Unix and POSIX-compatible systems, echo is a flag in the POSIX terminal interface, settable programmatically with the tcsetattr() function. The echoing is performed by the operating system's terminal driver code (in some way that is not specified by the POSIX standard). The standard utility program that alters this flag programmatically is the stty command, using which the flag may be altered from shell scripts or an interactive shell. The command to turn echo by the host system on is stty echo and the command to turn it off is stty -echo . On OpenVMS systems, the operating system's terminal driver normally performs echoing. The terminal characteristic that controls whether it does this is the ECHO characteristic, settable with the DCL command SET TERMINAL /ECHO and unsettable with SET TERMINAL /NOECHO .
