Lesson plan
Ecrasite
Ecrasite is an explosive material which is unaffected by moisture, shock or fire. It is a mixture of ammonium salts of cresol, phenol and various nitrocresols and nitrophenols principally trinitrocresol and picric acid. It was invented in 1888-1889 by two Austrian engineers named Siersch and Kubin, and used in Austria-Hungary to load artillery shells. Ecrasite was patented secretly, and its composition was once unknown. Ecrasite is prepared by the partial nitration of a crude mixture of cresol and phenol with a mixture of concentrated sulfuric and nitric acids and the neutralisation of the product with ammonia to produce a crude salt similar to ammonium picrate. Ecrasite is a bright yellow solid. It is waxy to touch and melts at about 100 °C. When subjected to open flame, it burns without detonation, unless confined. It is insensitive to friction. It requires a detonator for initiation. Its general adoption was hindered by several unexplained explosions during loading into shells, which might have been caused by creation of unstable metal salts of trinitrocresol and/or trinitrophenol when the explosive came in contact with metals or alloys such as copper, brass (widely used for manufacturing detonator parts) and possibly other ones.
Article summary
Ecrasite is an explosive material which is unaffected by moisture, shock or fire. It is a mixture of ammonium salts of cresol, phenol and various nitrocresols and nitrophenols principally trinitrocresol and picric acid. It was invented in 1888-1889 by two Austrian engineers named Siersch and Kubin, and used in Austria-Hungary to load artillery shells. Ecrasite was patented secretly, and its composition was once unknown. Ecrasite is prepared by the partial nitration of a crude mixture of cresol and phenol with a mixture of concentrated sulfuric and nitric acids and the neutralisation of the product with ammonia to produce a crude salt similar to ammonium picrate. Ecrasite is a bright yellow solid. It is waxy to touch and melts at about 100 °C. When subjected to open flame, it burns without detonation, unless confined. It is insensitive to friction. It requires a detonator for initiation. Its general adoption was hindered by several unexplained explosions during loading into shells, which might have been caused by creation of unstable metal salts of trinitrocresol and/or trinitrophenol when the explosive came in contact with metals or alloys such as copper, brass (widely used for manufacturing detonator parts) and possibly other ones.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.