Effective medium approximations

In materials science, effective medium approximations (EMA) or effective medium theory (EMT) pertain to analytical or theoretical modeling that describes the macroscopic properties of composite materials.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 10 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In materials science, effective medium approximations (EMA) or effective medium theory (EMT) pertain to analytical or theoretical modeling that describes the macroscopic properties of composite materials. EMAs or EMTs are developed from averaging the multiple values of the constituents that directly make up the composite material.

At the constituent level, the values of the materials vary and are inhomogeneous. Precise calculation of the many constituent values is nearly impossible. However, theories have been developed that can produce acceptable approximations which in turn describe useful parameters including the effective permittivity and permeability of the materials as a whole.

In this sense, effective medium approximations are descriptions of a medium (composite material) based on the properties and the relative fractions of its components and are derived from calculations, and effective medium theory. There are two widely used formulae. Effective permittivity and permeability are averaged dielectric and magnetic characteristics of a microinhomogeneous medium.

They both were derived in quasi-static approximation when the electric field inside a mixture particle may be considered as homogeneous. So, these formulae can not describe the particle size effect. Many attempts were undertaken to improve these formulae.

Applications

There are many different effective medium approximations, each of them being more or less accurate in distinct conditions. Nevertheless, they all assume that the macroscopic system is homogeneous and, typical of all mean field theories, they fail to predict the properties of a multiphase medium close to the percolation threshold due to the absence of long-range correlations or critical fluctuations in the theory.

The properties under consideration are usually the conductivity \sigma or the dielectric constant \varepsilon of the medium. These parameters are interchangeable in the formulas in a whole range of models due to the wide applicability of the Laplace equation.

The problems that fall outside of this class are mainly in the field of elasticity and hydrodynamics, due to the higher order tensorial character of the effective medium constants. EMAs can be discrete models, such as applied to resistor networks, or continuum theories as applied to elasticity or viscosity.

However, most of the current theories have difficulty in describing percolating systems. Indeed, among the numerous effective medium approximations, only Bruggeman's symmetrical theory is able to predict a threshold.

This characteristic feature of the latter theory puts it in the same category as other mean field theories of critical phenomena. {{NumBlk|| \varepsilon_{\mathrm{eff}}=\frac{H_b+\sqrt{H_b^2+8\varepsilon_m \varepsilon_d}}{4}, \text{ with } H_b = (3c_d-1)\varepsilon_d + (3c_m-1) \varepsilon_m. | }} Here the positive sign before the square root must be altered to a negative sign in some cases in order to get the correct imaginary part of effective complex permittivity which is related with electromagnetic wave attenuation. The formula is symmetric with respect to swapping the 'd' and 'm' roles.

This formula is based on the equality {{NumBlk|| \Delta\Phi=\iint \varepsilon_r(\mathbf r)E_n (\mathbf r)ds-\varepsilon_{\mathrm{eff}} \iint E_0ds=0, | }} where \Delta \Phi is the jump of electric displacement flux all over the integration surface, E_n(\mathbf r) is the component of microscopic electric field normal to the integration surface, \varepsilon_r (\mathbf r) is the local relative complex permittivity which takes the value \varepsilon_m inside the picked metal particle, the value \varepsilon_d inside the picked dielectric particle and the value \varepsilon_{\mathrm{eff}} outside the picked particle, E_0 is the normal component of the macroscopic electric field. Formula (4) comes out of Maxwell's equality \operatorname{div}(\varepsilon_r\mathbf E)=0 .

Thus only one picked particle is considered in Bruggeman's approach. The interaction with all the other particles is taken into account only in a mean field approximation described by \varepsilon_{\mathrm{eff}} . Formula (3) gives a reasonable resonant curve for plasmon excitations in metal nanoparticles if their size is 10 nm or smaller.

However, it is unable to describe the size dependence for the resonant frequency of plasmon excitations that are observed in experiments where the L_j 's denote the appropriate doublet/triplet of depolarization factors which is governed by the ratios between the axis of the ellipse/ellipsoid. For example: in the case of a circle ( L_1 = 1/2 , L_2 = 1/2 ) and in the case of a sphere ( L_1 = 1/3 , L_2 = 1/3 , L_3 = 1/3 ).

(The sum over the L_j 's is unity.) The most general case to which the Bruggeman approach has been applied involves bianisotropic ellipsoidal inclusions. where \varepsilon_0 is the absolute permittivity of free space and p_m is electric dipole moment of a single inclusion induced by the external electric field .

However this equality is good only for homogeneous medium and \varepsilon_d = 1 . Moreover, the formula (1) ignores the interaction between single inclusions.

Because of these circumstances, formula (1) gives too narrow and too high resonant curve for plasmon excitations in metal nanoparticles of the mixture. {{NumBlk|| \left( \frac{\varepsilon_\mathrm{eff} - \varepsilon_m}{\varepsilon_\mathrm{eff} + 2\varepsilon_m} \right) = \delta_i \left( \frac{\varepsilon_i-\varepsilon_m}{\varepsilon_i+2\varepsilon_m}\right), | }} where \varepsilon_\mathrm{eff} is the effective dielectric constant of the medium, \varepsilon_i of the inclusions, and \varepsilon_m of the matrix; \delta_i is the volume fraction of the inclusions. The Maxwell Garnett equation is solved by: so long as the denominator does not vanish.

A simple MATLAB calculator using this formula is as follows. % This simple MATLAB calculator computes the effective dielectric % constant of a mixture of an inclusion material in a base medium % according to the Maxwell-Garnett theory. % INPUTS: % eps_base: dielectric constant of base material; % eps_incl: dielectric constant of inclusion material; % vol_incl: volume portion of inclusion material; % OUTPUT: % eps_mean: effective dielectric constant of the mixture. function eps_mean = MaxwellGarnettFormula(eps_base, eps_incl, vol_incl) small_number_cutoff = 1e-6; if vol_incl 1 disp('WARNING: volume portion of inclusion material is out of range!'); end factor_numer = 2 * (1 - vol_incl) * eps_base + (1 + 2 * vol_incl) * eps_incl; factor_denom = (2 + vol_incl) * eps_base + (1 - vol_incl) * eps_incl; if abs(factor_denom) \frac{\varepsilon-1}{\varepsilon+2} = \frac{4\pi}{3} \sum_j N_j \alpha_j Where N_j is the number of particles per unit volume. By using elementary electrostatics, we get for a spherical inclusion with dielectric constant \varepsilon_i and a radius a a polarisability \alpha : \alpha = \left( \frac{\varepsilon_i-1}{\varepsilon_i+2} \right) a^3 If we combine \alpha with the Clausius Mosotti equation, we get: \left( \frac{\varepsilon_\mathrm{eff}-1}{\varepsilon_\mathrm{eff}+2} \right) = \delta_i \left( \frac{\varepsilon_i-1}{\varepsilon_i+2} \right) Where \varepsilon_\mathrm{eff} is the effective dielectric constant of the medium, \varepsilon_i of the inclusions; \delta_i is the volume fraction of the inclusions.

As the model of Maxwell Garnett is a composition of a matrix medium with inclusions we enhance the equation: {{NumBlk|| \left( \frac{\varepsilon_\mathrm{eff}-\varepsilon_m}{\varepsilon_\mathrm{eff}+2\varepsilon_m} \right) = \delta_i \left( \frac{\varepsilon_i-\varepsilon_m}{\varepsilon_i+2\varepsilon_m}\right) | }}

Generalization of the Maxwell Garnett equation to describe the nanoparticle size distribution

Maxwell Garnett equation describes optical properties of nanocomposites which consist in a collection of perfectly spherical nanoparticles. All these nanoparticles must have the same size. However, due to confinement effect, the optical properties can be influenced by the nanoparticles size distribution.

As shown by Battie et al., the Maxwell Garnett equation can be generalized to take into account this distribution. \frac{(\varepsilon_\text{eff}-\varepsilon_m)}{\varepsilon_\text{eff}-2\varepsilon_m} =\frac{3i \lambda^3}{16\pi^2\varepsilon_m^{1.5}}\frac{f}{R_m^3}\int P(R) a_1(R) dR R and P(R) are the nanoparticle radius and size distribution, respectively. R_m and f are the mean radius and the volume fraction of the nanoparticles, respectively. a_1 is the first electric Mie coefficient.

This equation reveals that the classical Maxwell Garnett equation gives a false estimation of the volume fraction nanoparticles when the size distribution cannot be neglected.

Generalization to include shape distribution of nanoparticles

The Maxwell Garnett equation only describes the optical properties of a collection of perfectly spherical nanoparticles. However, the optical properties of nanocomposites are sensitive to the nanoparticles shape distribution. To overcome this limit, Y. Battie et al. have developed the shape distributed effective medium theory (SDEMT).

This effective medium theory enables to calculate the effective dielectric function of a nanocomposite which consists in a collection of ellipsoïdal nanoparticles distributed in shape. \varepsilon_\text{eff}=\frac{(1-f)\varepsilon_m+f\beta\varepsilon_i }{1-f+f\beta} with \beta=\frac{1}{3}\iint P(L_1,L_2)\sum_{i \mathop =1}^3 \frac{\varepsilon_m}{\varepsilon_m+L_i(\varepsilon_i-\varepsilon_m)}dL_1 dL_2 The depolarization factors ( L_1, L_2, L_3 ) only depend on the shape of nanoparticles. P(L_1,L_2) is the distribution of depolarization factors. f is the volume fraction of the nanoparticles.

The SDEMT theory was used to extract the shape distribution of nanoparticles from absorption or ellipsometric spectra. \varepsilon_\text{eff} = \frac{1}{4}\left(H_{\varepsilon} + i \sqrt{-H_{\varepsilon}^2 - 8\varepsilon_m \varepsilon_dJ(k_ma)}\right), J(x)=2\frac{1-x\cot(x)}{x^2+x\cot(x)-1}, where is the nanoparticle radius and k_m = \sqrt{\varepsilon_m \mu_m} \omega / c is wave number. It is supposed here that the time dependence of the electromagnetic field is given by the factor \mathrm{exp}(-i \omega t). In this paper Bruggeman's approach was used, but electromagnetic field for electric-dipole oscillation mode inside the picked particle was computed without applying quasi-static approximation.

Thus the function J(k_m a) is due to the field nonuniformity inside the picked particle. In quasi-static region ( k_m a \ll 1 , i.e. a \leq \mathrm{10\,nm} for Ag ) this function becomes constant J(k_m a)=1 and formula (5) becomes identical with Bruggeman's formula. {{NumBlk|| \mu_\text{eff} = \frac{1}{4} \left(H_{\mu} + i \sqrt{-H_{\mu}^2-8\mu_m \mu_d J(k_m a)}\right), | }} H_{\mu} = (2-3c_m)\mu_d-(1-3c_m)\mu_m J(k_m a). Here \mu_\text{eff} is effective relative complex permeability of the mixture, \mu_d is relative complex permeability of the background medium containing small spherical inclusions of relative permeability \mu_m with volume fraction of c_m \ll 1 .

This formula was derived in dipole approximation. Magnetic octupole mode and all other magnetic oscillation modes of odd orders were neglected here. When \mu_m=\mu_d and k_m a \ll 1 this formula has a simple form

Effective medium theory for resistor networks

For a network consisting of a high density of random resistors, an exact solution for each individual element may be impractical or impossible. In such case, a random resistor network can be considered as a two-dimensional graph and the effective resistance can be modelled in terms of graph measures and geometrical properties of networks.

Assuming, edge length is much less than electrode spacing and edges to be uniformly distributed, the potential can be considered to drop uniformly from one electrode to another. Sheet resistance of such a random network ( R_{sn} ) can be written in terms of edge (wire) density ( N_E ), resistivity ( \rho ), width ( w ) and thickness ( t ) of edges (wires) as: {{NumBlk|| R_{sn}\,=\,\frac{\pi}{2}\frac{\rho}{w\,t\,\sqrt{N_E}} | }}

See also

Constitutive equation Percolation threshold

Text derived from https://en.wikipedia.org/w/index.php?oldid=1366296272 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

16 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.